Hi All
I tryed flashing my rom on qtek 8200 !!
Unfortunately it was a rom for the 8100 insted. so now there is only white screen when its turned on..
Is there any way to restore the bootloader from a memorycard ??
Regards NPG
The only way is via JTAG points and I have heard that they are shielded by a metal cover.
Hy.Who knows where is JTAG points on SPV C550?Please.
Thanks.
People have tried but say they are impossible to access.
i have same problem, how the solution......pls
Related
hello I´ve recover my m3100 from a dead brick (after used of universal sim lock) to full working phone
Her is my way
1. I´ve first try flashing a windows mobil 5 rom from my qtek 2020 on the m3100 for 2-3 times
2. then I´ve flas it with the new rom from Cingular ther are using bootloader 1,06..... and IT COME BACK ALIVE....
and if you have a HTC HERMES Then you just find a rom with you phons cid her
"http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades"
BUT REMEMBER IF YOU HAVE A ORANGE M3100 YOU CAN´T FLASH OTHER ROMS
BECAUST YOU HAVE TO USED A ORANGE CID ROM AND IS´T NOT OUT YET..
Good to hear That your device Is up now Congrat's , Wht if it's possible with human being
Why u've instal qtek 2020 on this hermes ?
I´ve just wanted to try somthing after 30 days looking at a £450 brick
@kimbay:
I have some questions for you, in order to understand how you fixed it and provide a "solution" for the others:
1) About the Qtek2020 flashing:
- Did the Himalaya flashing process did anything on the hermes?
- Where did the Himalaya flashing process stopped?
- What did you see on the Hermes screen?
- What error did you see on the Himalaya upgrade utility?
- Which rom did you exactly use? (post the ftp link of it please)
2) About your M3100
- Which CID does your hermes have? If it's a M3100 from UK, i guess it is ORANG001, right?
- Which ROM, radio rom and bootloader version did you have on your device when you fixed the problem?
If there's anything else I am missing and you think can be useful, please post it too...
Yes, please fill us in because I'm sitting on a brick'd TyTN
congrads on bringing it back to life
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
Hi POF
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Then I just try the new cirguler rom.
yes my m3100 is a orange001 cid -bootloader 1,04
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
P.S. now my problem is that I can´t unlock the phone because imei-unlock do not suport bootload 1,06
regards
kim
Izzard-UK said:
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
not for the moment I´am also stuck on cingular rom
Click to expand...
Click to collapse
kimbay said:
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Click to expand...
Click to collapse
OK, but which rom did you exactly use? (post the ftp link of it please)
ftp://xda:[email protected]/Himalaya/
kimbay said:
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
Click to expand...
Click to collapse
It's ok, it was original rom from M3100... no problem, no need to upload anything.
If you have dead Hermes try to flash with Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship.exe For me - it`s work.Regards
SPV M3100 Freez
Hello
I have A SPV M3100 anyoane write same ... for unlock and new freez in "Windows mobile"
when i put in 3 color and i see:
"Herm100
IPL-1.01
Herm100
SPL-1.04"
And when is in 3 color and connect to PC ActivSync get error cannot recognize this device
Hi!!!
I have found in SPV C550 J-tag pins.
Up
1-NTRST
2-TMS
3-TCK
4-TDO
5-TDI
Down.
Pin are in BLUE-LABEL.
Foto is T-Mobile SDA (Sonata) but pins I searched in SPV C550.
There SPV is without processor ;>
Greetings from Poland
Great find!
Thanks a lot and... pozdrowienia!
Fajnie jak się przyda, poświęciłem swoją "latarkę"
are that jtag pins have any connection with display message "data crashes. contact your service" on my spv c550?! Are they broken or somthin' cuz some guy tell me that i must change them to fix my problem?
Did someone try this?! Are the points ok?! I am going to flash my hurricane through this JTAG points so i'm not going to suprise me if something didn't worked ok?! And, is the WIGGLER cable ok for this, and if someone have bootloader and all need software for the JTAG flashing!? I will be thankfull!!!
who can give a complete guide how to make it work for a typhoon . now i use a wiggler cable can communicate with my typhoon, also can load a .nb file ,but how can i let my typhoon into the wish bootloader, my typhoon is in using now all is ok i just want to test how to change the SPL version via jtag method,everytime i loaded the SPL nb file ie.064, clicked run--go from--10000000---ok,if i hold the camera button the phone just white screen nothing happen cannot detect by mtty,if i dont hold the camera button the phone will startup nomally into wm6.1.
can somebody give me some help?thanks very much!
Hi guys.
I've a big problem.
During a radio update my tytn crashed, so i can enter only in the bootloader, nothing else.
I have in the bootloader:
Herm100
IPl-1.04
Herm100
SPL-2.10.Olipro
I've tried to flash the originale rom (cingular 8525) but it always stuck at 12% with error 262.
Also activesync doesn't work, when i put the usb cable on pc-pda the icon remain grey, not becoming green...
Any hope to revive my pda?
Thanks in advance for your help!
UPDATE
I've tried to flash schaps 3.54b (microsd method) and now windows mobile works.
the remained problem is the radio, when i boot the device i read:
R: NONE
G: NONE
bad sign?
Yep... Search for another thread here with radio problems i think that happens with 1.54 radio roms
I've never encountered a problem with the radio rom 1.54.xx.xx.
The "No GSM" error is nigh well impossible to fix. No-one I know has a lasting fix. There are 2 causes, I believe, that may be the culprit.
1). The radio rom memory area is corrupted... - Give up now, there is no help, You need a new motherboard.
2). The antenna has a problem. If you replace the antenna attached to the motherboard this may fix the problem. I did this.
Either way you will need to find a cheap Hermes. I picked up a couple on ebay and salvaged the parts I needed for fairly cheap. I bought "broken" or "faulty" Jasjams. Using them for spare parts I fixed my Hermes and a friends Hermes so they both still work, it was worth it to save my precious phone... Just a thought..,
Cheers...
I had the same problem and have never been solved so I gave up and and I bought me another. I still had the old hermes, so if someone knows how to solve this... I'll be really hapy!
diablos872001 said:
Hi guys.
I've a big problem.
During a radio update my tytn crashed, so i can enter only in the bootloader, nothing else.
I have in the bootloader:
Herm100
IPl-1.04
Herm100
SPL-2.10.Olipro
I've tried to flash the originale rom (cingular 8525) but it always stuck at 12% with error 262.
Also activesync doesn't work, when i put the usb cable on pc-pda the icon remain grey, not becoming green...
Any hope to revive my pda?
Thanks in advance for your help!
Click to expand...
Click to collapse
Hope this helps! Click to "Problem 5: Device shows NO GSM when booting"
I cant find this rom at google. My bad hands flush the 6.1 rom and forgot to unlock the cid. so right now the phone cant enter to the system. only RED DOPOD letter appear after switched on. Is there any way to fix this problem? Thanks a lot in advance
PS i am thinking that if i have the same rom as mine, i can flush it again using memory card, maybe it will work....
my dopod 818 pro(htc prophet g4) can't power on.
i need help to find the way to repair it.
i've looking in many pda forum, they talk about rewrite/reprogram the bootloader(i can't enter into bootloader mode).
they use something about jtag programmer, could anybody tell me how to use that thing(i'm newbi).
or is there anyway else to fix my problem???
I have the same problem with my Qtek S200 G4
this Jtag Pinout for HTC prohpet G4 ~ http://img.majidonline.com/show/183593/wizardjtagpinsis8.jpg
ROM Upgradation Failed
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
aadi1 said:
Dear All,
I was trying to upgrade my dopod 818 pro ROM version, but unfortunatly my connect breaked in the mid of process, due to that lost everything, even my previos OS too. and now i am unable to restart my mobile.whenever i am trying to on it, its showing only DOPOD on the disply may u plzz help me to recover my old settings?? i had already done the hard resett, but Result is NILL...
Click to expand...
Click to collapse
try reflash with the official rom