I have Dopod 818 Pro
I Up Room to WM6.1 (SPL 2.G4.4PDA)
Then I Back to WM5 (SPL become 2.20.0001)
( Hard SPL to 2.G4.4PDA is not effect in my PDA )
Then I can't Up Room to WM6.1
When finish, it's only shows me tri colour.
Now I using WM5.
How can I do to Up to WM6.1 and Hard SPL to 2.G4.4PDA
Thanks
lehoang49cc said:
I have Dopod 818 Pro
I Up Room to WM6.1 (SPL 2.G4.4PDA)
Then I Back to WM5 (SPL become 2.20.0001)
( Hard SPL to 2.G4.4PDA is not effect in my PDA )
Then I can't Up Room to WM6.1
When finish, it's only shows me tri colour.
Now I using WM5.
How can I do to Up to WM6.1 and Hard SPL to 2.G4.4PDA
Thanks
Click to expand...
Click to collapse
go to the link in my signature and read.. and try
dioxda2 said:
go to the link in my signature and read.. and try
Click to expand...
Click to collapse
It 's failed !!!
lehoang49cc said:
It 's failed !!!
Click to expand...
Click to collapse
ooops,
may be you go and have a look in the G4 forum... sorry for offering no help....
dioxda2 said:
ooops,
may be you go and have a look in the G4 forum... sorry for offering no help....
Click to expand...
Click to collapse
No problem! Thanks 4 your help
My SPL : 2.20.0001 -> I can't Up to WM6
If I upgrade to 2.G4.4PDA it'll show "Try with newer SPL version"
I'll find the way to fixed my problem:
1- I Use WM5 AKU2.2
2- I Up to WM6 by Touch 4.0.0.6 from PDAViet. That used 2 steps
3- I use that and run.bat from myPC. Thanks 4 hma4 to upload:
http://forum.xda-developers.com/attachment.php?attachmentid=60713&d=1196971345
4- Then I have SPL 2.G4.4PDA
5- Upgrade to W6.1 normanly by run G4.exe from Room Download.
Thanks 4 all. I using ShadoW 2.0 ( My Edition ) from varanusvincent
Related
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
skunknet said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
JumpSPL only works once, you have to run it prior to every Rom uopgrade you want to do.
The "New WM6 Upgrade Guide" is based on an other method, namely HardSPL instead of JumpSPL. The advantage is that HardSPL stays resident (until you flash another SPL) so you don't have to bother again with the SPL issue every time you want to flash.
So, if you are aquainted en comfortable with the way you did your first upgrade: Run JumpSPL first and the RUU afterwards, do it again with your new upgrade attempt. The result is the same, it's only one step more to execute.
Try~~
skunknet;1806937 said:
Hi all ...
I've upgraded my prophet using jumpspl tool ( by Pof ... ) ... Congratulation for his work !
I have IPL 2.20.0001 and SPL 2.13.0001 ... my device is G4 device...
With jumpspl i have successfully replace current rom of my SPV M600 ( Orange ) ... with Rom by I-Mate ( i have get it from ftp ).
My question is :
I have tried to upgrade to WM6 with New guide to upgrade to WM6 ...but when the process arrive at 100%, my device reboot and show the bootloader ...
I' don't know if it's possible to upgrade to WM6 ... do you have some ideas ???
I think my device is CID lock ! ...
Thanx in advance ...
Skunknet
Click to expand...
Click to collapse
HERE:
http://forum.xda -developers.com /showthread.php?t=353547
enjoy ~~~
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
skunknet said:
Thanx for answer ...
Rondol1 but i have G4 device ... are you sure that i can upgrade to WM6 ? ... I have IPL 2.20.0001 and SPL 2.13.0001. Do i have to upgrade IPL to the last version, run Jumpspl on device and launch RUU utility with my favorite ROM ??
Thanx again in advance ...
Click to expand...
Click to collapse
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Sorry...
rondol1 said:
I have a G4 myself and I have flashed allmost every single ROM that has come out here. Old and New style alike.
You IPL is fine, don't change it. Just run JumpSPL (your Prophet has a white screen) connect it to your PC and launch the RUU. If you want to try more ROM's after each other, you could install HardSPL to save time the next try.
Click to expand...
Click to collapse
Sorry for the broken link in the previous post
Please have a look here:-...
http://forum.xda-developers.com/showthread.php?t=353547
hope it helps~~ ^_^
Many thanx guys ...
i've upgrade successfully my G4 device to WM6 ....
I've upgrade to Prophet Touch VIII using jumpspl ....
Many thanx at all for information ....
hello
i was upgrading my prophet touch X from gullum with WM 6.1 Iphone 1.1.2
buat after i did the upgradeutilityG4 using .nbf file from the zip, my prophet always shows the bootloader and stops. it shows tri colored screen and
IPL 2.15.0001 and
SPL 2.20.0001 only
have i fried my prophet? or have i lost the OS image on the device?
what should i do?
[for mod, if this is not the appropriate sub forum, please move it.]
thx
i had the same problem too some time ago - try to go back to a wm5 rom like nanoscopic step1 or similar and then try to upgrade to wm6.1 again - if it doesnt work again, try the old way.
SmokinMan said:
i had the same problem too some time ago - try to go back to a wm5 rom like nanoscopic step1 or similar and then try to upgrade to wm6.1 again - if it doesnt work again, try the old way.
Click to expand...
Click to collapse
did you all try my tool? ( I do hope that will be helpful~~ @my signature ~~ )
ArrowWind said:
hello
i was upgrading my prophet touch X from gullum with WM 6.1 Iphone 1.1.2
buat after i did the upgradeutilityG4 using .nbf file from the zip, my prophet always shows the bootloader and stops. it shows tri colored screen and
IPL 2.15.0001 and
SPL 2.20.0001 only
have i fried my prophet? or have i lost the OS image on the device?
what should i do?
[for mod, if this is not the appropriate sub forum, please move it.]
thx
Click to expand...
Click to collapse
You didn't "HardSPL-ed" your Prophet. There is a lot written about that topic, use "search", read the Upgrade-Guide. If you still have questions left after that, read the ROM related thread thoroughly.
You better not start a new thread just for aking a common question..... The forum is crowded enough and almost impossible to keep track!
oops...you forget to hard spl..
HARDSPL-ed G4 device should show G4PDA on the bootloader screen(tri colour)instead of 2.20.0001
how to downgrade my dopod 818 pro with ipl 2.15.0001 spl 2.G4.4pd showdow 2.0 TE back to WM5? thank you.
genevie said:
how to downgrade my dopod 818 pro with ipl 2.15.0001 spl 2.G4.4pd showdow 2.0 TE back to WM5? thank you.
Click to expand...
Click to collapse
Just flash the PVtemp or NVID for prophet... look at my signature............ ^^
hi to all,newbie here.
my problem:
prophet dopod 818pro,as i read on label,still in 3 colours mode.
i see on display:
ipl 2.10.0001
spl 2.g3
what i can do for restore?
in origin the prophet is g4,as i know,and after one bad update this is result.
tnks to all.
ps.
i have taked a look in wiki and lot of topics,but i need help for start,how to force the upgrade or restore,how to connect the htc to pc whit win xp etc...
nykocam said:
hi to all,newbie here.
my problem:
prophet dopod 818pro,as i read on label,still in 3 colours mode.
i see on display:
ipl 2.10.0001
spl 2.g3
what i can do for restore?
in origin the prophet is g4,as i know,and after one bad update this is result.
tnks to all.
ps.
i have taked a look in wiki and lot of topics,but i need help for start,how to force the upgrade or restore,how to connect the htc to pc whit win xp etc...
Click to expand...
Click to collapse
You have a G3 SPL on your G4 device. Not a lot you can do...
EDIT: The most progress on this is here: http://forum.xda-developers.com/showthread.php?t=384235
I Need Help PLS 818pro 3 colour screen
I Have A Dopod 818pro, yesterday I Download This Rom Prophet_S4V.19701.01_F N i upgrade It But Now Be come 3 Colour Screen only
cant boot in win IPL 2.210.0001 SPL 2.20.0001 it is dead ??????:
egghead7 said:
I Have A Dopod 818pro, yesterday I Download This Rom Prophet_S4V.19701.01_F N i upgrade It But Now Be come 3 Colour Screen only
cant boot in win IPL 2.210.0001 SPL 2.20.0001 it is dead ??????:
Click to expand...
Click to collapse
You need to flash an official ROM, and then apply hard/soft SPL to the device.
Hei Bro i try that original Rom. Still ask for New NBF Can u help me or Post new rom to me thanks
egghead7 said:
Hei Bro i try that original Rom. Still ask for New NBF Can u help me or Post new rom to me thanks
Click to expand...
Click to collapse
Use an NVID ROM from the wiki.
I upgraded my QTEK s200 to bikertibi version 23071 full using bikertibi Prophet_Upgrade
I first tried to use SoftSPL but when it didn't work I used bikertibi tool to perform HardSPL
The upgrade went OK and I tried this version for a short time.
Because there is not much ram available I wanted to change to a different version
Every other version I tried ended up in the Bootloader screen (3 colors) after rebooting at the end of burn sequence.
Current version of SPL is:
IPL 2.09
SPL 2.20
I can go back to the original WM5 version I got RUU_Prophet_220734_2207114_024721_QTEK_WWE_Ship
but after that I cannot burn any WM6.5 version
Any help is appreciated
Moti
moti1010 said:
IPL 2.09
SPL 2.20
Click to expand...
Click to collapse
SPL: 2.09 ===>Hard SPL has not been performed.
So, simply perform it again, using bikertibi's tool or others in the forum.
You can use every ROM after that, (When you have SPL: 2.G4.4PDA)
babak00000 said:
(When you have SPL: 2.G4.4PDA)
Click to expand...
Click to collapse
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
joolay said:
Thats assuming moti1010 has a G4 device.. Go here to find out what you have
http://wiki.xda-developers.com/index.php?pagename=prophet_g3g4_how
Please read the wiki fully before flashing roms moti1010.. Its the safest way to prevent problems or panics if a problem does occur as most solutions are already posted in the Prophet Wiki
Click to expand...
Click to collapse
When you have SPL: 2.G4.4PDA
Click to expand...
Click to collapse
SPL: 2.G4.4PDA or SPL: 2.G3.4PDA
Thanks Joolay for your accuracy
Thank's for the help.
I later succeeded in performing Soft SPL and burning a new ROM
Moti