Hello!
i've got two questions about the MDA 1 using in my car. After making me an freehands facitlity, there are two little problems at all.
a) I want to mount the GPS connector plug whit glue on my MDA cradle. This will work, i mean, but i must remove the two metal pins on the sides of the connector to be able to set and remove the MDA. Will this work or is it the ground of the plug???
b) Yes, there are a lot of topics about MDA and external antenna. I have the idear to use an antenna connector from nokia. there will be some one for Nokia 3310 like this (http://www.tele55.de/shop/produkte/5/84/054194.htm) and so on. will this work?? Has someone tested this or knows a better way to use the MDA whit external antenna?
THANKS a lot for any answer !!!!
Markus
Ive read many post on here and others. I must say Im confused.
Is the new Blue Angel connector physically the same as the previous XDAII connector?
Are the pin outs the same?
Some people say no problem, some are filing theirs down??? Some are "forcing it in" - YIKES
i would love to know as well
The pin outs are the same - the connector is physically the same size, but there is one minor change - there is a little 'step' on one edge of the connector.
XDAII accessories, such as chargers, usb and gps do fit but you need to be careful when you insert them.
Forget my stupidity. I used to own the Siemens SX56 and had hotsync and car charger cables.
The question is now I have the Siemens SX66, is it safe to use the same cables from the SX56? I haven't tried it since I don't want to kill my new toy!
If anyone knows or can verify that it's safe it would be really appreciated.
I am using car charger, usb sync cable and wired gps that were originally bought for my XDA1, then used on XDAII and now work fine on MDAIII.
Do any of the serial keyboards work with XDA IIs?
I tried to connect the stowaway keyboard I used with my XDA II but it does not seem to work with my QTEK 9090.
I'm only guessing, but I would think that the drivers weren't written for wm2003SE.
I have the darfon fold out keyboard that I bought for my sx56, and last night I got it working just fine with my new sx66, so yes, they work. I needed to go to darfon.com and download the newest version of the driver.
I have one of the IR keyboards and the supplied driver works fine, but I have to balance the MDAIII on something to make it high enough for the IR receiver on the keyboard because the MDAIII IR is on the side.
The pin outs are the same
Click to expand...
Click to collapse
They are not!!!!!
There is a voltage output from an XDAII when in a call, but the XDA IIs doesn't give the voltage!
Can't remember which pin off the top of my head but I have been testing this and found this to be a major problem when designing a proper car kit for both items!
..Spence
Bit worried about using my incar chrger from my xdaII for my IIs. Does anyone know where I can get a charger or usb sync cheaply for the IIs/pd2k? Expansys are charging £20! There's one here:
http://www.firstphoneshop.co.uk/o2-phone-accessories/o2-imate-pda2k.shtml
But i'm not sure its not just the old II charger...
Hi all,
I see birdog has put piccies up at:
http://forum.xda-developers.com/viewtopic.php?t=18435&highlight=pin+blue+angel
(and thanks btw) but can anyone confirm this pinout?
Cheers!
Hi,
I have a wired GPS solution named Kirrio which has been working fine with my old XDA II.
Ive just recently bought an MDA III (XDA IIs) and was expecting it to be an easy swap.
However it seems that although the connector in the bottom of the PDA looks the same between the two, it has changed.
When I connect the wired GPS cable (which also includes power for the PDA) nothing happens.. the power led doesnt light yellow as is custom on the PDA when its charging, and the GPS doesnt work.
Ive noticed that the MDAIII connector seems to have a small spring thingy in the front of it which match with a slot carved out in the plugs. This is different to the XDA II... but Im not sure if the spring thingy is a small switch or something... and if the wiring is totally different between the two.
Kirrio cant help me.
Anyone have some ideas?
I am using my original Destinator (Leadtek) wired GPS that I got for the XDA, used it on XDAII with no problems and have been using it since last October with no problems on my MDAIII (XDAIIs)
check this
http://www.mobile-review.com/pda/review/htc-blue-angel-en.shtml
Reset key, cradle and cable connector is placed on the low part of the device. The connector is differed from the old device, it means that old cables and cradles can not be used with the new smartphone.
got a ba but need the inner workings, anyone got a damaged one about, ie the screens broken but the rest works? etc pref o2 uk to save flashing [email protected]
Hey guys.
Just looking for a damaged jasjam or dopod or hermes etc etc.
Needing a main board by the looks of things. Seem to have blown the charging circuit in the phone. Assume this is apart of the mainboard. Have tried new battery, charger, usb doesnt work etc.
So if anyone has a mainboard or complete phone i could buy please let me know.
PS i have had a lil expirience with it before. i smashed the lcd and got ahold of another. Replaced it and worked a treat till i fried it
Ahh well.
Cheers
Matt