Hello,
I tried to upgrade my imate with bluetooth (instead of cable, because it is in my job)and now the only thing i see in the screen is "Serial v1.02" I have tried to do a full reset but nothing changes. What can i do??? Thanksss
:lol: not buy serial cable!!!
there is an OFFICIAL UPGRADE ready and existing, but not yet PUBLIC,
it is one nice 40 MB RUU file which will uprgade your unit to english language:
Microsoft Pocket PC version 4.20.0 (Build 13252)
ROM version: 1.60.00WWE
ROM date: 12/03/03
Radio version: 1.06.01
Protocol version: 1337.16
ExtROM version: 1.60.06
Indirizzo http://xda-developers.com/incoming/rom160wwe/RUU16006WWE_T-mobile_NL.exe
IT'S FANTASTIC AND EASY WHIT THE USB CRADDLE
What you may try to do, for a start, is to reinstall the ROM upgrade once again, USING THE USB CRADLE and nothing else. Better remove the SIM card before installing the upgrade. Also, make sure that the battery is fully charged. All through the upgrade process, do not touch the device.
Finally....
Next day When i was in my job put my imate in the cradle, ran the upgrade and it worked.....I am happpppppy ¡¡¡¡
Upgrade failed
I had the same problem as dherrero. However, I have no luck as him. My XDA II still dead can not be boot. Anyone can help? Thanks.
IT's DEAD
I have a MDA from T-Mobile for 3 weeks now. I find out about the rom update (RUU16006WWE_T-mobile_NL.exe), tried it and got the message that the update failed.
On my MDA screen therse is only the message "USB v1.01".
Running the update again doesn't help.
Is there a solution or do I have to contact T-Mobile?
Hi all ,
One of my Friends had the same problem , he tried another computer and it works , then guess what was the problem ???? We found that it was ZONE ALARM !!!
So please check You'r computers guyes ,it might be another software makes the upgrade failed .
Thanks
Hi all!
We have to be aware, that the upgrade program says "NO PROGRAMS RUNNING ON THE PPC AND NO PROGRAMS RUNNING ON THE PC ITSELF"
It's a hard lesson i learned years ago while flashing a BIOS..... if possible, do it at an UPS equipped PC (or notebook btw) to reduce your chances of killing your device.
Windows XP has many more programs running than one would suspect. As a first measure, kill all the ones you can in the right side of your taskbar, shut down your Anti Virus and Firewall, and cross your fingers while upgrading.....
Should we also shut down Activesync? Or is it needed for the upgrade?
Thanx.
I am in the same boat this day. Please help !!! I tried to upgrade the imate threw the club imate ... i downloaded ok i believe ... i did not use the cradel just a mini sync usb cord ... i used this before many times to sync... but when i tried to run the official update it stopped and now it says only serial v1.02 when i put it in the cradel it says usb v1.o2 its dead... no light for batter scharge nothing???? no sync at all please help
ActiveSync is not involved in the upgrade process. The upgrade program runs out of this, with it's own connection and settings via USB.
I haven't used the mini cord, so I'm of no help about it.
Try the upgrade program again, looks like it failed to fully flash your ROM. (That's why you don't see the charging light, it's Software controlled)
Good Luck!
mm
Try to update your imate using a cradle connected to a pc(usb). It should work
i have the exact same problem as highlighted by the others here, USB and v1.02 screen. Question is, how do you continue to flash your rom after it fails and you put back your unit into the cradle and activesync does not sync it anymore
the upgrade doesnt use activesync so it doesnt matter. Just put the imate in the cradle(in other pc, if possible) and run the upgrade
qtek rom update problem
hi guys. my qtek only says USB v 1.02. I cannot do any rom flash. what rom should i use. where can i download it from?
I was doing rom upgrade my MDA for WM2005 but during the rom upgrade my MDA's usb cable was plug out and connection lost. Now my MDA don't open and don't connect with computer because I start rom upgrade program (Hima Upgrade UT) it wrote ERROR101:CONNECTION ERROR . I did hard reset several times but didn't change anything.Please help me how will I solve this problem
hello all,
i am using jiggs rom AKA 3.3 on XDA ATOM
but i am not able to use ICS as it always give me an error..."cannot connect for an error reason. To change your connection settings, tap settings" and this error is same for both USB and BT LAN. my EDGE connection is working as i can connect to the net on my PDA.
please tell me what to do?? or please provide me with a patch.
also can i get the same softwares included in this rom on a WM6 rom??
please help me..need it ASAP as i am not able to connect my laptop to net.
puneet_84 said:
hello all,
i am using jiggs rom AKA 3.3 on XDA ATOM
but i am not able to use ICS as it always give me an error..."cannot connect for an error reason. To change your connection settings, tap settings" and this error is same for both USB and BT LAN. my EDGE connection is working as i can connect to the net on my PDA.
please tell me what to do?? or please provide me with a patch.
also can i get the same softwares included in this rom on a WM6 rom??
please help me..need it ASAP as i am not able to connect my laptop to net.
Click to expand...
Click to collapse
do you still want WM5 instead of WM6? ICS is fully working on WM6...
you could try to install it manually. DOWNLOAD ICS HERE
Install it on device and NOT on storage card. Thanks to Chainfire for the install cab. I'm not sure if it would be okay to overwrite the non-functioning ICS on your ROM.
thanks tj for the info.
i do not want to use WM5 but want the package provided in the WM5 rom of jiggs.
also i tried installing it but it gave me error saying there is some certificate conflict. so i will soon migrate to WM6.
thanks again
I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error) i tried with WWE_020108_B2_DS Rom but the same happend. The the support agent told me that i need to do it with the boot-loader mode (rec + soft reset) i enter to the boot loader options are
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
i plug the USB cable and USB detected come up but in the PC the same error happend (costumer or id model error)
So hwhat can i do
cyberkoolmx said:
I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error)
Click to expand...
Click to collapse
Hi
I have the same problem with my XDA Atom Life Arabic Rom I can't upgrade to WM6 so I think use other option like ROM unofficial
Hi
Today I upgrade my PPC to Medkid's ROM 19214 and is amazing
edited the pass.32 file - worked
I just bought an O2 XDA Atom Life on craigslist. It still had the Windows Mobile 5.0. So the first thing I wanted to do was to upgrade to the latest ROM. I tried the ROM's on MWG.com and on MyXDA.com. Everytime I had the same problem. I had the 20070326B1ARA Windows 5.0 Arabic version. None of the ROM's would work.
I got the Arabic Windows 6.0 ROM on myxda.com and started the install. Once it extracted the files, I opened my Windows/Temp folder on my computer. Using a hex editor I opened pass.32. near the beginning it had the letters WWE. I changed those letters to ARA and saved the file back into Windows/Temp. Then I continued the installation and everything worked.
UPDATE: This also worked with the latest ROM from the MWg website. I don't know if there is much difference except that the MyXDA version includes a program called O2 Connect for updates... which doesn't find any updates.
Hi, my atom have 2 problems:
1: No service, so, cant use it as a phone, everithing is working, bluetooth, WiFi, etc, the sim is recognized by te phone, but cant find ´the network service.
So, my option is to upgrade the ROM:
Problem 2: once connected to Activesync (in Win Vista) start flashing a lot of rom´s and the phone change to "Upgrade Utility USB Connected" and the PC loose the connection, try to install another controller and the ROM soft send the message: can´t connect to the phone.
So, I cant upgrade or repair the rom.
DID ANYONE KNOWS THIS PROBLEMS?
Sorry for my english, I´m from Argentina.
THANKS