Hey guys, I have a bit of a problem here. My GPRS connection stays on full time, but when I get a phone call, the GPRS cannot connect and I have to soft-rest at times. I'm using AP Black Dual Rom with radio version 1.50.00.00 with T-Mobile USA connection. Is there any solution to this? Will upgrading the radio rom to 1.57.00.00 help? Thanks
yadvani said:
Hey guys, I have a bit of a problem here. My GPRS connection stays on full time, but when I get a phone call, the GPRS cannot connect and I have to soft-rest at times. I'm using AP Black Dual Rom with radio version 1.50.00.00 with T-Mobile USA connection. Is there any solution to this? Will upgrading the radio rom to 1.57.00.00 help? Thanks
Click to expand...
Click to collapse
Yes it will, I have the same setup except with the 1.57 radio.
Thanks..so far its working out .. Hope it keeps up.
You're welcome and it should hold up.
Related
Phone: Htc TyTN
Basically I upgraded, and everything went well, using radio 1.43 and vp3g's wm6 rom...
Phone works very well compared to the previous 1.2x radio and now it shows "Edge" in the connection instead of "G" like it did previously...
The only problem I have is my wireless data connection no longer works...
I have 3 other TyTN's that are setup with the factory default configuration, so if data is required from them in order to setup the new one, it can be attained.
I have noticed that while using vxutil on both the new rom and the factory one, the "cellular line" modem adapter entry looks fine, all ip's are good, but there is a second one on the wm6 device, it says "cellular line 2" and this does not exist on the factory unit.
Also using the vxutil "get hmtl" function on the wm6 device works fine, it will successfully retrieve html, but when I try to browse with IE it does not work and hangs on "locating...".
Any suggestions?
Possible solution
Go to Start - Settings - Click connections in Connections tab
Create a new connection under My Work network as per instructions from ur service provider
Saved Connection ? OK!
Click on Connections again - There would be 2 tabs - Tasks and Advanced
Click advanced
Click "Select Network"
Check both the network selected are "MY WORK NETWORK"
OK
Soft Reset ur device
and u r done!!
Good Luck
Jaggi
nope, still the same problem...
I tried exporting the registry settings for the connection manager from the working TyTN to mine and it wouldn't even connect to its voice service after!
;0
I'm sure there are some specific settings in there that need to be changed (hklm\comm\comnnmgr\providers ??), I noticed that alot of the settings are for cingular...
I've got the same problem. i'm with t-mobile uk. any advice welcomed.
I've got the same problem. i'm with t-mobile uk. any advice welcomed.
found out what it was!!
I had used the first rom I came across, the vp3g with the cingular extended rom!! doh.
I just installed pro_black_3.0.1 and the newest radio 1.4.7, setup my connection as per my provider's suggetsion, and everything works 100%!!
i get 2900kbps when i'm on 3g and about 140kbps on edge, call quality is pristine and the time to live on a call is instant compared to my 1.3x radio!
highly recommended for anybody on rogers using a TyTN!! (rogers is starting to retail it now for 299$ with a contract!!)
[continued...]
1) back up everything using PPCPimBackup or similar
2) upgrade the bootloader to hard-spl-v7
3) upgrade your Radio ROM to 1.47.00.10
4) upgrade your System ROM to pro_Black_3.0.1
5) setup your rogers wireless internet connection:
cellular 3g, gprs
access point: internet.com
username: wapuser1
password: wap
6) re-run pimbackup and restore your contacts/schedule/emails/etc
7) laugh at others who are still using the rogers wm5 build from mid 2006 and the 1.3x radio that came with it.
haha funny do tell me if ur name display works with WM6
i know mine still works with WM5 had to get my phone replaced by rogers after WM6 flash
mazdaspeed said:
haha funny do tell me if ur name display works with WM6
i know mine still works with WM5 had to get my phone replaced by rogers after WM6 flash
Click to expand...
Click to collapse
lol, no everything works fine.
1.48
Actually- Radio Rom 1.48 works very well- I've been using it for a few days now. Good battery life (I recommend using a comm-manager or data app to kill HSDPA during idle standby because it does make it run out faster)
1.48 really grabs a signal and holds it- good voice quality too.
But- truth be told- 1.42 that came with it was probably just as good....
If your phone was hanging on Locating and you were using the VP3G ROM, you probably didn't disable the proxy.
VP3G cooks ROMs for AT&T use and AT&T use a proxy to connect to the internet. Rogers does not.
Theres a simple program in Programs/Proxy Manager just run it once and presto.... proxy gone and wifi as well as Rogers works fine.
Its well documented in the wiki as well.
I've used the Black ROMs and the VP3G V3 is far superior in speed and stability. Black has lots of bling but seems far to experimental for serious use.
so i recently went to the wm6 ROM 'Hermes_WM6_WWE_vp3G_v2.0_ATT' and am using that new 1.48 radio. IPL is 1.04 and SPL 2.10.
now when i am on the phone (voice) or am synched to the computer, i lose my internet connection???? it comes back as soon as i hang up or unplug the USB but what gives with this? is there a setting that i need to activate or some patch for the ROM that i need for this? i just noticed this today but is über frustrating and i can't figure out why this is happening. outside from that i like this ROM build but this internet thing is irritating. any ideas?
There is a setting on your PC when you set up active sync for your device to keep the internet connections even when you sync to the PC. As far making a voice call, you can only do that while on 3G, not on Edge.
yeah I know about the activesync setting I think that might be the pc prooblem because I can't remember if I checked that box but anyway... I like in the middle of orlando fl and the data only switches between hsdpa and 3g, I am talking about dropping the internet while on the phone and in a 3g area (like my house). I just assumed they might be connected but maybe not. I can fix the activesync issue no problem but about the voice call situation I don't know. I might just try a different rom and/or radio because now that I have upgraded it seems the device is slightly slower and the battery life sucks too... any more ideas please let me know.
Hello all,
Well stupid me decided to upgrade my Rogers branded Hermes200 (TtYN) to wm6 without knowing everything I needed to. Installed HardSPL and then the HK English rom.
Phone portion works great
After searching and reading, I found the settings for connecting to the Internet for Rogers. Great.
Tried setting up active synce and it gave me the certificate not vailid error.... installed the cert on the new rom and with the h200 hooked up via usb to the computer it syncs up with my exchange server perfectly.
When I disconnect from the PC, direct push stops working....
When I force a send/receive.... it sits at 'connecting...' for a few minutes and if I'm lucking enough to be watching, it comes back with a 'connection error' message on the status bar before it flips back to number of messages in the inbox display...
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
obiwan05 said:
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
Click to expand...
Click to collapse
I can't really comment on the others, but your H vs. 3G issue isn't an issue at all. The fact that your device shows H just means that you have access to Rogers' new Vision network (HSPDA). Cooked ROMs use an H to differentiate HSDPA (3.5 generations technology, faster) from the 3G for UMTS (3rd generation technology, fast but not the fastest). Because HSPDA is an enhancement of UMTS and is built on top of it, a lot of Windows Mobile 5 ROMS (like the stock Rogers ROM) don't differentiate the fact that it's an HSDPA connection, even though it is, and just show a generic "3G". So... rest assured, the H thing is not a bad thing.
Alright i just got a at&t 8525, the internet works when connected through wifi and the phone works.. but it will not give me a data connection through at&t. I updated it to black satin after using hard spl (the internet worked fine b4 this but stopped after this point). I then used AUTO_Unlock_v3a.bat to sim unlock it, then ran hard spl again, and installed BlueCalm_WWE_V10.. still no data connection... Is it my radio rom ??? thanks for any help
Did you run the Connection Setup cab?
I found the settings and input them into my phone... it works fine now thanks for the help
Jim1228 said:
I found the settings and input them into my phone... it works fine now thanks for the help
Click to expand...
Click to collapse
That's what the Connection Setup would've done
Anyhow, glad you got it working.
The connection setup that came with the rom didn't work... it only worked when i put them in manually
Hi,
can someone please help me.
On the sense builds (V3.1, V3.6, EVo v2.2), I cant get any internet connection at all (forget data drops, i havent got ANY connection / 3G)
I can set it up with Wifi, and it ALL runs perfectly.
I have 4 bars reception and can make calls.
if I turn WIFI off and I cant connect to any internet pages. where it should say 3G it has a little G with up and down arrows but can still make calls. On the V3.1 and v3.6 tried to switch to GSM auto as suggested in one thread, made no difference at all.
Am running ROm 3.14 with radio built in 2.15 i think.
check this - if I use an old build like froyostone 2.1 (non-sense) then it can connect to 3g no problem with internet, same ROM / Radio.
hope someone can help. I tried to put this up in the actual build threads and then nobody answers.
thanks
psg
use the search on the andriod threats
There are more post about it and they do explain how to edit your network connections of your phone provider