Hi I have tried to search but unable to find a solution to my problem. I have downloaded and tried to install latest WM 6.1 for my atom pure but an error pops up "unable to create windows temp file" anyone able to help? I have tried re download and deleting temp files and have had no luck!
possum4 said:
Hi I have tried to search but unable to find a solution to my problem. I have downloaded and tried to install latest WM 6.1 for my atom pure but an error pops up "unable to create windows temp file" anyone able to help? I have tried re download and deleting temp files and have had no luck!
Click to expand...
Click to collapse
Execute SFX archive and DSUU will auto-execute then follow the setup procedure.
Related
Hi everybody,
Below is the files that I can't get anywhere, kindly advice.
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
read this
http://forum.xda-developers.com/viewtopic.php?t=18287
or check out the ftp
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Unable to download file
Hi all,
While I download the Nk.nbf file and tried to unzip it, then it show error message "file corrupted". I tried few times still remain the same result. Kindly advice. :twisted:
Hi all,
Sorry guys, the file that I downloaded was the WM2003SE. Hope you guys can help me.
if the file died in the transfer then wait awhile before downloading it again because the isp and your own cache will keep the file and just give it to you again when you try to download it again
But the transfer file is successful. While I wanted to unzip it, the error message occur saying that file corrupted. Kindly advice
even though a transfer is successfull then the thing being transfered can still be currupt
a transfer is always successfull unless it times out
there is no check for anything but timeout
Well, I already tried almost 10 times, but after finished downloaded and after error message still occur "File may corrupted"after unzip it.
By the way, the "2.06.00WWE-Extracted ROM.zip" how to use it?? Kindly advice
seng_mun said:
Well, I already tried almost 10 times, but after finished downloaded and after error message still occur "File may corrupted"after unzip it.
By the way, the "2.06.00WWE-Extracted ROM.zip" how to use it?? Kindly advice
Click to expand...
Click to collapse
thats a zip made with the files from the 2.06.00wwe rom its for developing adn checking
Since the ROM file that I download is corrupted, can I use mkrom to revert this zip file to NK.nbf? Kindly advice
Since the nk.nbf file in "Himalaya_SE_2.06.00_Imate" folder is corrupted can somebody re-upload the file? I so desperate to go to WM2003SE since everybody is using it and give good comment on it.
Currently I using chinese version of WM2003SE, whenever it off my XDAII it will hanged....
Kindly advice.
PPl, can somebody help, the file WM2003SE in ftp site is corrupted. Can somebody upload it again? Thanks and kindly advice
Credits for finding/pointing to this solutution go to AirwolfUK.
This is also hidden somewhere in a thread, but I think it deserves it's own thread. We (G4 owners) don't need to flash all our roms in Italian language. In stead of copying all the Update Utility files just copy "ROMUpdateUtility_Wizard_NoID.exe" and it will stay in English.
So if you get this error on you're G4:
ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA phone. Please get newer Update Utility
Just replace the "ROMUpdateUtility_Wizard_NoID.exe"! (I'll attach it too)
If you want to turn an already Italian installer into English replace all the files from "English Update Utility Files G4.zip".
Great! Thanks a lot for these! Hepled me a lot
Guess it should be a sticky, as not many people know where to find these things.
I've tried ROMUpdateUtility_Wizard_NoID.exe but keep getting
"Error 208: File Open.
The update utility can not open the requested file. Please check your update utility".
Anyone got any ideas what I am doing wrong?
maybe you're not with the utility and the nk.nbf in the same folder(all in the root of the folder).
Thank you so much...this just saved my otherwise bricked phone!
thx worked perfect in flashing the radio rom on my g4 to 2.19 uk!
I can't figure out how to upgrade my rom. I keep getting the dreaded Error 300.
Can somebody provide instructions on how to run this?
How?
How do I do this?
What should I replace?
Where should I put the "ROMUpdateUtility_Wizard_NoID.exe" file?
I just normally run the updateroom from a folder on my laptop, so where should I place "ROMUpdateUtility_Wizard_NoID.exe"?
I am attemping to flash Superrom
orelse4054 said:
How do I do this?
What should I replace?
Where should I put the "ROMUpdateUtility_Wizard_NoID.exe" file?
I just normally run the updateroom from a folder on my laptop, so where should I place "ROMUpdateUtility_Wizard_NoID.exe"?
I am attemping to flash Superrom
Click to expand...
Click to collapse
If the rom is one exe file, unpack it first with winrar. You'll see the file afterwards.
Yes I knows it becomes a exe file after I have zipped it.
Ok here it goes:
I run a normal ROM update exe file, I get the
"ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA phone. Please get newer Update Utility"
Then what shall I do with the "ROMUpdateUtility_Wizard_NoID.exe " if I just run this one the message: ""Error 208: File Open."
Can someone set up a step by step guide please?
Seems you haven't upacked the rom executable. You should have multiple files afterwards (e.g. ROMUpdateUtility_Wizard_NoID.exe and nk.nbf). Just replace the ROMUpdateUtility_Wizard_NoID.exe! The file error tells it can't find your nk.nbf.
Damnnnnn Vippie Rocks!!!!!!!
How to do it ..
is it just click and run ROMUpdateUtility_Wizard_NoID .. and the application will do all .. or we just need to but all stuff in unpack flash ( any flash ) and install it to firmware ??
thanks allot in advanced
help still not working
I got the ROMUpdateUtility_Wizard_NoID.exe and I run it in the same folder as the rest of the files from the program and I STILL get error 300
Thanks Wes
Thank you men !!!
Thank you very much men, you saved my life !!!
Ok this file just bricked my MDA !
deathblooms237 said:
Ok this file just bricked my MDA !
Click to expand...
Click to collapse
Impossible.... it's you who did something wrong.
vippie said:
Impossible.... it's you who did something wrong.
Click to expand...
Click to collapse
No... I think your half-ass instructions confused everyone! you posted the update utility yet did not instruct that it should have been extracted in the same folder as the new ROM of the user's choice.
If you were to create a folder then extract the utility to that folder, then click on the extracted file, then for sure you will get the error msg.
Download first the ROM you want in a folder, All New ROMs will extract to two files. One of those files is the rom update utility file that you will need to replace with the Update Utility exe file in this post. To do this just extract the update utility tool ( posted here ) in the same folder of the downloaded and extracted ROM folder. You will then be up and running. Follow the instructions.
To follow up with my previous post, I would suggest you start with the 'Wizard_Love rom or the Button Rom as basis. This will reset your download prompts on your device to accept any Wizard compatible ROM of your choice. After the first update most likely you will not need this utility to update your favorite rom onto your device.
asfoor said:
No... I think your half-ass instructions confused everyone! you posted the update utility yet did not instruct that it should have been extracted in the same folder as the new ROM of the user's choice.
Click to expand...
Click to collapse
And even than it wouldn't brick the device. So your "no" should be "yes, you're right vippie"!
Did you notice the "developers" in the websites name? What are people doing on this forum if they don't know how to REPLACE a file. It isn't necessary to spoon-feed people.
the file i have is an EXE. how am i supposed to get this to run on my Hermes? when i move it to my phone, it gives me an error.
help is appreciated.
I wanted to flash the WM7.5 Mango for my Toshiba TG01 ,I reached the white screen but the following error appeared,"SD Downloading failed,File open Error"
Help?
Try to re'download the rom
Maybe the file was corrupt
--------------------------------------------
Sent from my GT-S5830 running ImaGinary ICS.
Thank if it helped.It's there for a reason
Please help me!
Hi everyone! Recently I got this Thosiba tg01 and wanted to change from wm6.5 to 7 or to some cooked rom.
What I tried:
SDDL method: SD Downloading Failed - File Open Error
Pin method: Same error.
Tried 4 roms, all gave me the same error.
Is there a way to flash rom from pc or from the phone itself. Please help me I just can't stand WM6,5. If not, i'll sell my device.
Half a year on I still get the same problem,can't seem to find a solution
Seems like I will never get a solution then
the sd card must be formated and must contain Only "PRG" folder, inside folder put sddl and .bin file 0321 version !
Hello there,
Just to clarify:
- the uSD Card must be formatted.
- sddl+.exe must be in the ROOT of the card.
- the TGO01xxxx.tsw ROM image file must be in the \prg folder.
- execute sddl+.exe from file explorer and it will then flash the ROM.
Hope that helps It's actually very straightforward and reliable.
The 'short pin' method is primarily used if you happen to have a 'half-bricked' device and are unable to boot to start with.
Regards,
Kevin
Ok, I rooted my NT using external SD card and was able to toggle between android 2.3.4 and B&N OS. I have been spending days trying to figure out how to upgrade to CM 10.2 (and have been unsuccessful due to endless tutorials posting invalid files). I finally found a tutorial on this forum and there was a part that specifically said to not mess with the drive that my nook was plugged into. Well...too many windows up, too long on forums etc...long story short...I messed with that drive.
So now my NT boots up to the B&N start up screen; but I get a forced restart error and an error message that says that nook root file stopped working. The touch screen doesn't work and I can't do anything but power off.
Is there ANYONE who can help me? I'll be eternally grateful!
You might consider trying this repart.img method described at http://raywaldo.com/2012/06/how-to-un-brick-a-nook-tablet-8gb-or-16gb/.
files won't extract
When I googled feverishly for a solution, I did find that website and tried that method. The problem that I'm having with this entire process is that most of these files are invalid, missing a part or corrupted. I've tried using WinRAR and 7-zip and neither program is able to successfully extract the files; this repart img included. This project of mine has turned into a frustrating debacle!
Thank you for your reply, though!
I'd suggest you burn a pre-made SD CM10.x image from http://iamafanof.wordpress.com/2013...id-4-3-for-nook-tablet-imgsdc-boot-09aug2013/ and see if you can successfully boot and run it.
If that works you can proceed to restore the internal emmc image either by using the repart.img method or by flashing flash_stock_1.4.2.zip from https://github.com/succulent/acclaim_recovery_sdcard. See also http://forum.xda-developers.com/showthread.php?t=2575489 for potential helpful info and pointers.
When I extract files, this is the message I get from most of the files I unzip. I tried the cm10.2 img file and I couldn't extract it. I included a screenshot of the error message I keep getting. I've tried several different unzip programs and it's always the same error.
Bad download? Redownloaded and same error?
aworobec said:
When I extract files, this is the message I get from most of the files I unzip. I tried the cm10.2 img file and I couldn't extract it. I included a screenshot of the error message I keep getting. I've tried several different unzip programs and it's always the same error.
Click to expand...
Click to collapse
Did you try the alternate mirror on Mediafire http://www.mediafire.com/download/bo2qu6v4qo9p6a2/cm_acclaim_10.2.0-RC0_13OCT2013_HD_SDC_IMG.7z?
Also FWIW I use 7-zip archive manager program (www.7-zip.org/download.html‎).