Related
Hi everybody,
Below is the files that I can't get anywhere, kindly advice.
HimaClearJumpCode.exe
HimaGetDeviceData.exe
HimaUpgradeUt.exe
ms_.nbf
NK.nbf
Radio_.nbf
read this
http://forum.xda-developers.com/viewtopic.php?t=18287
or check out the ftp
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Unable to download file
Hi all,
While I download the Nk.nbf file and tried to unzip it, then it show error message "file corrupted". I tried few times still remain the same result. Kindly advice. :twisted:
Hi all,
Sorry guys, the file that I downloaded was the WM2003SE. Hope you guys can help me.
if the file died in the transfer then wait awhile before downloading it again because the isp and your own cache will keep the file and just give it to you again when you try to download it again
But the transfer file is successful. While I wanted to unzip it, the error message occur saying that file corrupted. Kindly advice
even though a transfer is successfull then the thing being transfered can still be currupt
a transfer is always successfull unless it times out
there is no check for anything but timeout
Well, I already tried almost 10 times, but after finished downloaded and after error message still occur "File may corrupted"after unzip it.
By the way, the "2.06.00WWE-Extracted ROM.zip" how to use it?? Kindly advice
seng_mun said:
Well, I already tried almost 10 times, but after finished downloaded and after error message still occur "File may corrupted"after unzip it.
By the way, the "2.06.00WWE-Extracted ROM.zip" how to use it?? Kindly advice
Click to expand...
Click to collapse
thats a zip made with the files from the 2.06.00wwe rom its for developing adn checking
Since the ROM file that I download is corrupted, can I use mkrom to revert this zip file to NK.nbf? Kindly advice
Since the nk.nbf file in "Himalaya_SE_2.06.00_Imate" folder is corrupted can somebody re-upload the file? I so desperate to go to WM2003SE since everybody is using it and give good comment on it.
Currently I using chinese version of WM2003SE, whenever it off my XDAII it will hanged....
Kindly advice.
PPl, can somebody help, the file WM2003SE in ftp site is corrupted. Can somebody upload it again? Thanks and kindly advice
Credits for finding/pointing to this solutution go to AirwolfUK.
This is also hidden somewhere in a thread, but I think it deserves it's own thread. We (G4 owners) don't need to flash all our roms in Italian language. In stead of copying all the Update Utility files just copy "ROMUpdateUtility_Wizard_NoID.exe" and it will stay in English.
So if you get this error on you're G4:
ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA phone. Please get newer Update Utility
Just replace the "ROMUpdateUtility_Wizard_NoID.exe"! (I'll attach it too)
If you want to turn an already Italian installer into English replace all the files from "English Update Utility Files G4.zip".
Great! Thanks a lot for these! Hepled me a lot
Guess it should be a sticky, as not many people know where to find these things.
I've tried ROMUpdateUtility_Wizard_NoID.exe but keep getting
"Error 208: File Open.
The update utility can not open the requested file. Please check your update utility".
Anyone got any ideas what I am doing wrong?
maybe you're not with the utility and the nk.nbf in the same folder(all in the root of the folder).
Thank you so much...this just saved my otherwise bricked phone!
thx worked perfect in flashing the radio rom on my g4 to 2.19 uk!
I can't figure out how to upgrade my rom. I keep getting the dreaded Error 300.
Can somebody provide instructions on how to run this?
How?
How do I do this?
What should I replace?
Where should I put the "ROMUpdateUtility_Wizard_NoID.exe" file?
I just normally run the updateroom from a folder on my laptop, so where should I place "ROMUpdateUtility_Wizard_NoID.exe"?
I am attemping to flash Superrom
orelse4054 said:
How do I do this?
What should I replace?
Where should I put the "ROMUpdateUtility_Wizard_NoID.exe" file?
I just normally run the updateroom from a folder on my laptop, so where should I place "ROMUpdateUtility_Wizard_NoID.exe"?
I am attemping to flash Superrom
Click to expand...
Click to collapse
If the rom is one exe file, unpack it first with winrar. You'll see the file afterwards.
Yes I knows it becomes a exe file after I have zipped it.
Ok here it goes:
I run a normal ROM update exe file, I get the
"ERROR[300]: INVALID UPDATE TOOL
This Update Utility cannot be used for your PDA phone. Please get newer Update Utility"
Then what shall I do with the "ROMUpdateUtility_Wizard_NoID.exe " if I just run this one the message: ""Error 208: File Open."
Can someone set up a step by step guide please?
Seems you haven't upacked the rom executable. You should have multiple files afterwards (e.g. ROMUpdateUtility_Wizard_NoID.exe and nk.nbf). Just replace the ROMUpdateUtility_Wizard_NoID.exe! The file error tells it can't find your nk.nbf.
Damnnnnn Vippie Rocks!!!!!!!
How to do it ..
is it just click and run ROMUpdateUtility_Wizard_NoID .. and the application will do all .. or we just need to but all stuff in unpack flash ( any flash ) and install it to firmware ??
thanks allot in advanced
help still not working
I got the ROMUpdateUtility_Wizard_NoID.exe and I run it in the same folder as the rest of the files from the program and I STILL get error 300
Thanks Wes
Thank you men !!!
Thank you very much men, you saved my life !!!
Ok this file just bricked my MDA !
deathblooms237 said:
Ok this file just bricked my MDA !
Click to expand...
Click to collapse
Impossible.... it's you who did something wrong.
vippie said:
Impossible.... it's you who did something wrong.
Click to expand...
Click to collapse
No... I think your half-ass instructions confused everyone! you posted the update utility yet did not instruct that it should have been extracted in the same folder as the new ROM of the user's choice.
If you were to create a folder then extract the utility to that folder, then click on the extracted file, then for sure you will get the error msg.
Download first the ROM you want in a folder, All New ROMs will extract to two files. One of those files is the rom update utility file that you will need to replace with the Update Utility exe file in this post. To do this just extract the update utility tool ( posted here ) in the same folder of the downloaded and extracted ROM folder. You will then be up and running. Follow the instructions.
To follow up with my previous post, I would suggest you start with the 'Wizard_Love rom or the Button Rom as basis. This will reset your download prompts on your device to accept any Wizard compatible ROM of your choice. After the first update most likely you will not need this utility to update your favorite rom onto your device.
asfoor said:
No... I think your half-ass instructions confused everyone! you posted the update utility yet did not instruct that it should have been extracted in the same folder as the new ROM of the user's choice.
Click to expand...
Click to collapse
And even than it wouldn't brick the device. So your "no" should be "yes, you're right vippie"!
Did you notice the "developers" in the websites name? What are people doing on this forum if they don't know how to REPLACE a file. It isn't necessary to spoon-feed people.
Hi I have tried to search but unable to find a solution to my problem. I have downloaded and tried to install latest WM 6.1 for my atom pure but an error pops up "unable to create windows temp file" anyone able to help? I have tried re download and deleting temp files and have had no luck!
possum4 said:
Hi I have tried to search but unable to find a solution to my problem. I have downloaded and tried to install latest WM 6.1 for my atom pure but an error pops up "unable to create windows temp file" anyone able to help? I have tried re download and deleting temp files and have had no luck!
Click to expand...
Click to collapse
Execute SFX archive and DSUU will auto-execute then follow the setup procedure.
So, like an idiot I wiped/data/system to install a new Rom and didn't double check to make sure the file was good. I can get into ClockworkMod no problem but I have my nandroid and various other downloaded Roms on my microsd card. I'm trying to adb push a Rom while in Clockwork but it keeps failing. What am I doing wrong? Tips please? Thanks much!
Bump, Bump
What I'm getting is "Protocol Failure" every time I try to push a Rom zip to my sdcard. Thoughts?
Is it the size of the file? I just successfully pushed a smaller image file.
After much frustration and trial and error, I got this fixed and back up and running. Ended up having a driver issue with ADB. Master Zen's flash script came in real handy and I highly recommend it if any of you run into a similar problem!
Could anyone run the following RUU
RUU_Flyer_HC_S_HTC_WWE_3.55.405.1_Radio_20.4801.30.0822U_3822.10.08.07_M_release_226690_signed
and extract the .zip files for me? My flyer is stuck in hboot and fastboot, cant detect it in adb to flash new boot/recovery.img so am trying to force the flash from an external sd.
I cant run the ruu long enough to get at the .zip files as it stops after detecting my flyer, doesnt like the state it is in.
I have attached a process monitor app, in the filters tab create one called rom.zip and as the RUU runs, the .zip files should appear in the process monitor window, hit jump to and you should be able to access and copy the files.
Hopefully once i can copy the files to my sd, hboot should flash them and bobs your proverbial.
I realise most devs would use adb but it just isnt happening for me, a bit of reading some threads and suggestions from devs has got me thus far, so i will let you know how i get on if someone can post these zip files for me.