tell me please
Can we change the processor in our HTC Prophet?
hskeik said:
tell me please
Can we change the processor in our HTC Prophet?
Click to expand...
Click to collapse
No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,
Never ever think about it, there'll always be the world's biggest and greatest NO.
thanx
Rooks said:
No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,No,
Never ever think about it, there'll always be the world's biggest and greatest NO.
Click to expand...
Click to collapse
can you tell me please why?
hskeik said:
can you tell me please why?
Click to expand...
Click to collapse
coz i could not even open it (w screw driver)
hskeik said:
can you tell me please why?
Click to expand...
Click to collapse
coz i could not even open it (w screw driver) lol
hskeik said:
can you tell me please why?
Click to expand...
Click to collapse
ppc's are not designed like other pc's which we are using as our desktop or laptops....
The entire PCB of pda's are designed as a whole part and the other parts of a pda with the processor are necessary components so you cant change the processor....
Can open it
take a T6 tool. you can open your s200 with it. Like i did to put the new silver case and new touch screen on it. I'm a system builder its idd not like a comp.
If you can: unsolder BGA connections and then resolder them without damaging any components with a processor that is pin compatible and then adapt virtually every driver there is then maybe just.
tell me please
Can we change the processor in our HTC Prophet?
Click to expand...
Click to collapse
No my friend....But, u can overlock ur cpu speed , with ur own risk of course....
Thanks...
286 Mhz
286 Mhz overclock with BatteryStatusExt.1.05 installed on Gullum's Coffie rom (NLR edition)
Or try tu Put a AMD X2 64 6400 black edition in it joke
l3v5y said:
If you can: unsolder BGA connections and then resolder them without damaging any components with a processor that is pin compatible and then adapt virtually every driver there is then maybe just.
Click to expand...
Click to collapse
You have to build your own eboot(bios) to adapt the new proz to the old Hardware. So i say don´t try or don´t think about it.
To repair this ppc with a new proz is no problem for pro´s but not for newbes.
i´m production forman in a little development companie and i know it is hard work and knowhow you need. and hardware (placer,vapourphase ore reflow,XAOI)
enjoy your living PROPHET
Related
How can I overclock the processor frequency. Some people says,that their device is running on 530MHz or on other speed. Default is the frequency 400Mhz(that we know). Is it a special tool to do that? Thanks in advance.
Yes, try Pocket Hackmaster or XCPUScalar.
Use both tools at your own risk since overclocking may destroy your device.
Sascha
keep in mind that higher frequency == lower batt time
...
...overclocking may destroy your device...
Click to expand...
Click to collapse
It doesn't help a hard-reset or a ROM upgrade via bootloader?
it's not designed to be overclocked, that said, I've overclocked mine when I need to, and it hasn't exploded/melted/refused to turn on so far...
Re: ...
TomasNM said:
...overclocking may destroy your device...
Click to expand...
Click to collapse
It doesn't help a hard-reset or a ROM upgrade via bootloader?
Click to expand...
Click to collapse
No, not if your CPU or memory chip dies.
Sascha
...
Yes understand of course. I have experiences with PC overclocking. That if is a high frequency for the processor,the computer freezes itself or doesn't start. It's working again at lower frequency. Nothing was damaged. But I've mentioned,that the CPU clock will turn back to 400MHz after HReset... Or not?
Re: ...
TomasNM said:
But I've mentioned,that the CPU clock will turn back to 400MHz after HReset... Or not?
Click to expand...
Click to collapse
Yes, it will.
XCPUScalar for instance returns to default speeds when device is not resetted by the program itself, so even after soft-reset with other tools.
Sascha
One question.
Can I use XCPUScalar for "downclock" and get more battery?
HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?
CHeers,
i don't know about last version but i had the 0.2 version, maybe it's old one, but maximum i could increase my processor for 264 mhz not more, but realy i don't know if it's useful or not, cause i didn't see differance. what about other users?
OMAP ON Prophet
I do but after you turn off the device or reboot the device you have to execute the app again the only solution is to put it in the startup file. I used it on my Jasjamin and i use it at 209 MHZ, you can put more but you might experience reboot or app failure.
for alternatif you can use batterystatus, more info on mainscreen and can overclock omap too, i try till 299mhz(sometimes), and works good, you can setting for auto overclock at wakeup
can download here http://www.chi-tai.info/cs_batterystatus_xda_neo_wm5_im_cs.htm#DownloadBeta
RonLion said:
HI,
does anyone uses OMAPClock.exe for Overclocking?
What is the latest version and on which rate does the prophet runs fast but stable?
CHeers,
Click to expand...
Click to collapse
[size=+2]POST #12[/size]
Be carefull
Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.
deltav13 said:
Remember ppl overclocking, reduces main processor life, if you use it you might diminish the life of your device, take care, you do this at your own risk.
Click to expand...
Click to collapse
1. yes, it will be a bit too harsh for the processor,
2. it does consume more power,
3. it will freezes on some apps,
4. over over-clocking (over 264Mhz) may brick the device,
5. for fun ....
[size=+2]POST #12[/size]
OMAP.CAB
PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)
INSTALL AND SOFT RESET.
THE DEVICE WILL RUN IN 264mHZ.....
UNINSTALL IF YOU WISH..
p.s.
please take care the power consumption.
Use on your own risk.
[size=+2]POST #12[/size]
i keep my prophet overclocked at 286mhz with batterystatus for a year now.
i never had any unstability problems. these only occur only if using speed above 286mhz, ex:293.
At 286 works very nice, i'm so used with this speed that I'll never downclock my device
cheers
Good app and thanx for all info
Nice app....i had my mpv 600 sitting for a while now, and i have use it now with new rom and it's working fine at 264mhz
dioxda2 said:
PLEASE TRY IT FOR FUN ONLY~~~~ ( tested with Speed King 2 Lite new version.)
INSTALL AND SOFT RESET.
THE DEVICE WILL RUN IN 264mHZ.....
UNINSTALL IF YOU WISH..
p.s.
please take care the power consumption.
Use on your own risk.
Click to expand...
Click to collapse
Hi dioxda2,
So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?
Thanks in advance!
chavdar said:
Hi dioxda2,
So the app will not be affcted from soft resets and the device will away run with 264 MHz? Could you please post a link to the cab?
Thanks in advance!
Click to expand...
Click to collapse
Read " MUST READ.txt " first
password = dioxda2
1. below 264 is fine,
2. want to try higher? I had tested. Prophet bricks!!!!
3. use @ your own risk, default clock is 264
4. want to change the clock lower? run omap_OverClock from the startmenu/programs folder,
5. it will keep in 264 even after softreset,
6. it will keep in 264 even after power on,
7. use wakeapp to clean the notice service if neccessary (if popup occurs after uninstall),
8. or hard-reset to clean if you wish.
wakeapp =
http://www.google.com.hk/search?q=w...s=org.mozilla:zh-TW:official&client=firefox-a
have fun~!
dioxda2 - XDA forum 2006
Click to expand...
Click to collapse
I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.
wanna high?
hekimbaba said:
I am using at 286 mhz and boost maximum 299 mhz. 312 makes phone unstable.
Click to expand...
Click to collapse
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
dioxda2 said:
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
Click to expand...
Click to collapse
Thanks dioxda2!
I used Battery status for about 2 years but I also notice significant difference between battery status and Omap.exe - about 15 MHz - > The version of Omap that I have is showing less than battery status and I think the correct value was shown by battery status
dioxda2 said:
DON'T just look @ the digits,
dare you try this Omap.exe with higher than 264?
I did push too much and a result of bright screen eternally......
Batt. status is not SAME as omap.
so, listen or not.... you bet !
Click to expand...
Click to collapse
Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.
hekimbaba said:
Yes my friend When I try 312 mhz phone seem ok but when you try open something it is lock. I am trying this Qtek s200 G4. 299 mhz working very stable. Overclocking could be changeable at same systems. İt depends on cpu manufacturing time etc etc.
Click to expand...
Click to collapse
What app are you using to over clock with ?
I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?
fautorr said:
I have some XP with Home Screen Plus Plus(used to be Bat.Status)the only Problem I had, was that you cannot turn it on at the same time with Manila 2D, because it works as a today plugin and Manila turns everything off. Does OMAPClock.exe work like this?
Click to expand...
Click to collapse
OMAPClock is different its a seperate aplication not a today screen plugin like bat.Status so yes it will work with Manila 2D
The most I gotten was 276 now am using 240 is stable and no problems over that and and my Device hangs I think its a Rom thing on other roms I can go up to 299 lol but on WM 6.5 the most I tryed is 240 anybody use WM 6.5 whats the limit ur Device can take then when u were using WM 6.0 and 6.1?
This is the tutorial how to overclock our Samsung wave with Android.
1.Install android in our telephone: http://forum.xda-developers.com/showthread.php?t=1118436 but with this image:http://www.megaupload.com/?f=EDGW82QZ (because this image is rooted).
2.Download this program: http://www.filesonic.es/file/1427654474
3.Put the program in the memory card and install it.
4.Have to give root permission for it to work.
5.When open it press "Overclock Load Module".
a.After "CPU frequency max" and we will come out a few options for overclocking.
b.Choose an option and press to "Confirm".
6.Press in "Scaling" and put the maximum and minimum to the maximum and press apply apply.
This is all.If someone has a problem do not hesitate to ask.
This is the maximum i could get with my wave:
1580Mhz: http://imageshack.us/photo/my-images/845/img20110827005953.jpg
1600MHz: http://imageshack.us/photo/my-images/844/img20110827010105.jpg
did you really do this? or is it fake
Android have much more possibility to overclock and easy but if kernel not integrated it you cant overclock, maybe its true overclock then we need see benchmarck difference or this is just number overclocking nothing change on hardware !!
Benchmarck ?
Tigrouzen said:
Android have much more possibility to overclock and easy but if kernel not integrated it you cant overclock, maybe its true overclock then we need see benchmarck difference or this is just number overclocking nothing change on hardware !!
Benchmarck ?
Click to expand...
Click to collapse
the hardware changes.i'll post quadran and antutu benchmark tests later.
Post your kernel...
baza14 said:
Post your kernel...
Click to expand...
Click to collapse
Is the original kernel.
ispanecaaaa said:
the hardware changes.i'll post quadran and antutu benchmark tests later.
Click to expand...
Click to collapse
Verry good news then !!
Need root Android yet ?
Tigrouzen said:
Verry good news then !!
Need root Android yet ?
Click to expand...
Click to collapse
Yes.Tonight i'll make a tutorial how to overclock your wave-droid.
cool! does it feel faster?
tnx we wait for TUT
what is your quardranat benchmark?
What about the heat?
Ready the tutorial.
didnt work for me
every time that i use any option from "CPU frequency max" the program stopped working
what is the problem ?
civil.scholar said:
didnt work for me
every time that i use any option from "CPU frequency max" the program stopped working
what is the problem ?
Click to expand...
Click to collapse
do you give the root permissions for the program ?
p.m:Sorry for my bad english.
yes ofcourse
i can run other applications that need root permission
didnt work for me too
sorry ... try this other version:http://www.multiupload.com/CEWEHFNTY9 and comment !!!
ispanecaaaa said:
sorry ... try this other version:http://www.multiupload.com/CEWEHFNTY9 and comment !!!
Click to expand...
Click to collapse
I did it with Tegrak and it seems to have accepted the 1.2 ghz I did with it...but how to confirm it?? I think wave certainly feels a bit more snappier with this...Or am I imagininig things..!
NHS2008 said:
I did it with Tegrak and it seems to have accepted the 1.2 ghz I did with it...but how to confirm it?? I think wave certainly feels a bit more snappier with this...Or am I imagininig things..!
Click to expand...
Click to collapse
the wave run more fast when is overclocked ...
Interesting, so Android on the Wave runs faster with this? The heat should also increase or am I wrong? While I was playing games with the PSX Emulator on Android, my Wave got really warm (Stock Clock 1 Ghz), so I guess with the overclocking is a little dangerous due to overheating etc.
Hello I bought a Chinese cell, Mlais MX58 Air, but its UI is limited to 32 FPS, is there any way to unlock or limit to 60 FPS?
Could do this by modifying the kernel? You can modify a kernel or pick up another device and add my information?
I would try to use this kernel: http://forum.xda-developers.com/showthread.php?t=2249808
Here comes the Android 4.2.1 ROM with full Project Butter experience with UI running @ 60+ FPS* making our W8 a real beast!
Click to expand...
Click to collapse
Any suggestions or is it better to give up and buy another device?
Thank you.
HicarusBR said:
Hello I bought a Chinese cell, Mlais MX58 Air, but its UI is limited to 32 FPS, is there any way to unlock or limit to 60 FPS?
Could do this by modifying the kernel? You can modify a kernel or pick up another device and add my information?
I would try to use this kernel: http://forum.xda-developers.com/showthread.php?t=2249808
Any suggestions or is it better to give up and buy another device?
Thank you.
Click to expand...
Click to collapse
You would have to use a kernel made for that device. Another kernel from a different device will not work on yours But as China almost never releases the kernel source for their devices you maybe out of luck.
Wayne Tech Nexus
A while ago was released the source code of MTK6589, that serve?
Just wanted to add 60 FPS in the UI, nothing more.
HicarusBR said:
A while ago was released the source code of MTK6589, that serve?
Just wanted to add 60 FPS in the UI, nothing more.
Click to expand...
Click to collapse
That's is a chipset. Not the kernel. They are 2 completely different things.
Wayne Tech Nexus
Understand... anyway wouldbe better change the phone of what mess with that?
HicarusBR said:
Understand... anyway wouldbe better change the phone of what mess with that?
Click to expand...
Click to collapse
Sorry I dont understand the question.
Better change the phone? than mess with that?
Sorry my Google english...
HicarusBR said:
Better change the phone? than mess with that?
Sorry my Google english...
Click to expand...
Click to collapse
To be honest yes. You are better off not getting a clone device or anything really with that chipset as it is mostly never supported after bought and has no after market support.
Understand... than you know any launcher that runs at 60 fps?
Because this is the only thing that bugs me.
Thanks for the replies man.
I dont think launchers change the fps but try out Apex Launcher for a smoother experience.
Hi
For almost 2 years I switched my computer with a Ryzen 3600 processor (my mistake that I regret every days).
I remember at that time I couldn't do much for my Pocophone because unlike Intel. AMD will not provide right information to modify the rom.
I want to know if this has changed because I want to install a custom rom for my new Redmi11s (PC processor is still a Ryzen 3600)
Thank you
What did I just read?
ok this post doesn't make any sense.
eclipsek20 said:
What did I just read?
Click to expand...
Click to collapse
Something for sure.
culebra_solida said:
ok this post doesn't make any sense.
Click to expand...
Click to collapse
Exactly