So I did the unlock and put the new sprint rom on it. I then loaded the prl, changed the msl to all 0's. I called verizon to change it from my juke. They told me the esn is not in there database, she had to submit a form to try to get it changed, it will be some days if they do it at all. Is there anything I can do to get this to work on Verizon without them trying to add the esn and it possibly getting denied. I would like to get it up and running today. Does anybody have a way to fix this, that is in noob terms. Thank you in advance!
Yes, you can supercid it and then clone your existing esn onto it.
http://www.ringerpost.com/forums/rpost.pl?b-rt/m-1207420735/
ok I attempted to clone it to my existing juke phone that I have active on verizon. When i change the esn I get no signal. Even when prl is loaded. When I change the esn back to the stock esn, I get a signal, but verizon won't activate that esn, they called me back and said its a sprint esn and they couldn't activate it. Man I am pulling my hair out trying to figure this out. Can anybody offer some help, or post the steps they used to get this working?
any help would be great
ltent said:
any help would be great
Click to expand...
Click to collapse
vzw hasnt fully made their system open yet. they wont accept an esn that they didnt sell. so no sprint esn will be activated. the only thing you can do is change the esn, but since that makes you not able to get a signal, seems like you might not be doing that right...
i don't understand what im doing wrong
You're not doing anything wrong. Verizon WILL not activate any phone on their network that doesn't have a Verizon ESN. The mogul will run perfectly fine on the network, but because it has a Sprint ESN, they will not activate it. Now...if you're trying to clone the ESN of an existing Verizon phone, that's a whole different story and is quite illegal.
I don't believe that cloning the esn from a juke will work -- because VZW knows the phone type by the esn. It seems that you would need to use an esn from a junk mogul
give it a try?
the phne should at least get a signal from that esn though. It gets nothing! Its like I'm in a no coverage zone
i just activated my sprint motoQ on verizon. they did not question the sprint ESN at all.
flashed a vz image and vz prl, and all is good.
dcd1182 said:
i just activated my sprint motoQ on verizon. they did not question the sprint ESN at all.
flashed a vz image and vz prl, and all is good.
Click to expand...
Click to collapse
^^^ Thats cuz they know the power of DCD
dcd1182 said:
i just activated my sprint motoQ on verizon. they did not question the sprint ESN at all.
flashed a vz image and vz prl, and all is good.
Click to expand...
Click to collapse
is it possible to use verizon phone for sprint? Then use your rom?
nathan7 said:
is it possible to use verizon phone for sprint? Then use your rom?
Click to expand...
Click to collapse
I would love to know this. It would cut my bill by about 75%.
Asking the experts...
I have been reading and following the titan for some time and are ready to purchase. Looking at Verizon vs. Sprint for new device, Verizon is way more expensive. Looking at eBay there are many for Sprint and next to zero for Verizon.
I would like to bid on a "clean ESN" phone for Sprint, then activate on Verizon. Possibly even activate on Sprint for some time then switch. (I have under 2 months left on my contract).
I have found a few that are NIB for a seller and asked for the ESN. He states he gives them only to the winner. I say red flag, but does he have a security issue (I could clone it??)?
And from above, could I do the double activate or if Verizon says it is clean only do it there?
Thanks.
I am also trying to do this. I have the cracking 6800 package, followed the instructions and was able to get the cid to all o's, although i am stuck in CDMA workshop and cant change the ESN because i am not sure what port to connect on( i have tried all them no luck) Anyone with any ideas would help me out alot. Also if the phone is currently unlocked with 2.4 loader but has the sprint 3.35 radio is it safe to flash to a stock verizon rom? Do i need to even do this? I have flashed with a custom rom then selected verizon as my carrier but in EPST config it still shows SPCS.
dcd1182 said:
i just activated my sprint motoQ on verizon. they did not question the sprint ESN at all.
flashed a vz image and vz prl, and all is good.
Click to expand...
Click to collapse
SHOW OFF.......lol
were not worthy!.....were not worthy!
Related
I was a cell tech 10 years ago but now I am lost. I want to switch providers but keep my phone. Company techs say no way, have to buy new phone. That HTC 6800 and xv6800 look similar but have different guts and one will not emulate the other. Can I flash the mogul to work with verizon? If so, A few keywords for searching this site, to get up to speed would be greatley appreciated. Thanks for your help.
The phones are essentially identical if you put cosmetic differences aside. The real difference is that Sprint have that one's ESN number in their database for the phone, and Verizon have no knowledge of that phone in their database. So, if you call VZW they will say, "hmmm... nope, we can't help you." But, if you illegally change that one's ESN to the ESN of a valid Verizon phone, you can register that phone to their network. But, there is a little difference about ESN, MSL, MSID, etc. between VZW and Sprint... so if you decide to break the law well, make sure to research your topic thoroughly. It is possible though.
illuminarok said:
The phones are essentially identical if you put cosmetic differences aside. The real difference is that Sprint have that one's ESN number in their database for the phone, and Verizon have no knowledge of that phone in their database. So, if you call VZW they will say, "hmmm... nope, we can't help you." But, if you illegally change that one's ESN to the ESN of a valid Verizon phone, you can register that phone to their network. But, there is a little difference about ESN, MSL, MSID, etc. between VZW and Sprint... so if you decide to break the law well, make sure to research your topic thoroughly. It is possible though.
Click to expand...
Click to collapse
verizon now (or will soon) lets you use any phone on their network (provided its CDMA of course) so having them activate a sprint mogul shoudlnt be an issue
defaultdotxbe said:
verizon now (or will soon) lets you use any phone on their network (provided its CDMA of course) so having them activate a sprint mogul shoudlnt be an issue
Click to expand...
Click to collapse
My Verizon rep said next year... and in Verizon time that means don't hold your breath.
i had heard some areas had started immediately following the announcement last november
i bought an HTC PPC6800 Mogul (on ebay) for the alltel network any ideas, for a noob, on how to make this work with sprint?
i bought an HTC PPC6800 Mogul (on ebay) for the alltel network any ideas, for a noob, on how to make this work with sprint?
Click to expand...
Click to collapse
Why would you buy an alltel phone off ebay if you want to use Sprint's network?
i bought the alltel version because i saved 400 bucks doing that, also the same phone is available for both providers so technically there shouldnt be any problems using one or the other right? i am stuck with sprint so must use them for now
Yes there is one big problem. You can't use an Alltel ESN on the Sprint network unless you somehow manage to get Sprint to add it to their database.
so i am stuck with a phone for alltel that i will not get to use with sprint, ever?
Pretty much...unless you can SOMEHOW convince a dumbass sprint rep to add it for you (pretty much never happens)...or you clone a Sprint ESN which is illegal.
Sprint to Alltel
I flashed a Sprint Touch(6900) with the official Alltel rom and Alltel added with no problems and everything on the phone worked great. I would think you can just flash a sprint carrier rom, now whether Sprint will add an Alltel ESN on your account I do not know....
haha
alltell doesnt care as long as its a phone that they sell ... sprint cares... now for the ESN thing as long as its not a ESN in use by a other phone in therory it isnt cloning its just barrowing... say my old phone broke and i used its ESN this is all theory though good luck
seems i got sprint to add the phone i flashed from alltel to sprint, yea. NOW i would like to supercid it any ideas?
My apologies if this has been covered....I searched a bit but didn't find the answer.
My friend has a Mogul he got from sprint. He'd like to sell it to me for $75.
I wonder. If I use DCD kitchen, load the verizon radio, DCD ROM, then the verizon Carrier cab......would it work?
Thanks,
Matt
sudermatt said:
My apologies if this has been covered....I searched a bit but didn't find the answer.
My friend has a Mogul he got from sprint. He'd like to sell it to me for $75.
I wonder. If I use DCD kitchen, load the verizon radio, DCD ROM, then the verizon Carrier cab......would it work?
Thanks,
Matt
Click to expand...
Click to collapse
I don't believe so. The radio in the sprint phone is GSM and the radio in the Verizon phone is CDMA.
Edit: I am incorrect. Sprint is CDMA and Verizon is CDMA... so I'm guessing that it could be possible. I have yet to test this though.
The answer is yes and no.
Yes, it is the exact same hardware, and therefore you can flash a custom rom/radio and install the verizon carrier cab leaving you with an xv6800 with a mogul casing.
The only issue is getting Verizon to activate it on their network, as it has a Sprint ESN. In the past, they were very strict about not allowing any non-Verizon ESN's in their database, though I've heard RUMORS that they've eased up a bit on it due to their "Open Network" campaign.
Honestly, it's a crapshoot, but if you can get Verizon Support to activate it, then it would work perfectly.
gc14 said:
The answer is yes and no.
Yes, it is the exact same hardware, and therefore you can flash a custom rom/radio and install the verizon carrier cab leaving you with an xv6800 with a mogul casing.
The only issue is getting Verizon to activate it on their network, as it has a Sprint ESN. In the past, they were very strict about not allowing any non-Verizon ESN's in their database, though I've heard RUMORS that they've eased up a bit on it due to their "Open Network" campaign.
Honestly, it's a crapshoot, but if you can get Verizon Support to activate it, then it would work perfectly.
Click to expand...
Click to collapse
I heard somewhere that verizon has a new policy to support any phone on their network, but they also call their data plan with a 5GB cap the "UNLIMITED" plan. Go figure.
Hopefully when Sprint comes out with the Diamond and other awesome new HTC phones about a year ahead of Verizon, we will be able to active their hardware on The Network. I am keeping my fingers crossed.
Yes it can be done. i have an alltel ppc6800 on vzw. the easiest way to do it is from the vzw website esn switch or activate equipment. There are some other steps you have to take to get the software loaded, not the stock rom. Then you will have to call vzw and have them reset your DMU keys. start here:
http://forum.ppcgeeks.com/showthread.php?t=20090
or send you phone in:
http://forum.ppcgeeks.com/showthread.php?t=24855
Oh and you'll have yo change the SPC code since it's a sprint phone. need to get that to a 000000, again the first post will help with that.
Hope this helps.
Hi, this is my first post on the XDA forums and I have some Q's. Hopefully I find some A's. Can someone point me in the right direction or explain this. I bought a used Sprint Mogul and I have Alltel. I want to have this phone work for Alltel. All I have right now is the newest HTC rom for alltel and the Titan Unlocker. Will someone give me a hand on how to make this phone my new phone for Alltel? BTW I dont want to really run any custom roms unless I have to.
Thanks,
Moulds
The problem isn't the rom, the problem is that carriers store their "own" ESN's in their systems, since the phone wasn't sold to Altel originally, it won't be in their system. There are stories of people having success getting one carrier or the other to activate other carriers phones, but it's extrememly rare and very difficult to do. The first thing you would have to do is download the stock rom for Altel for your model phone, flash it, and verify the phone boots and appears to work. At this point, you can try going into the Altel store and see if you can convince their reps to activate the phone. If they won't, then try calling customer service and see if you can get them over the phone to do it, however again, their system is going to throw up a flag when they try to activate someone other carriers phone.
If the phone doesn't look exactly like Altel's there is even less of a chance of getting it activated.
Honestly your best bet is to put it back on ebay and take the proceeds from that sale to buy a used Altel phone. You will have a whole lot less trouble.
BTC
Well what if I took the current esn of my razr on change my mogul to that? would that work and if so how do I do that.
That is illegal and even discussing it in this forum can get you banned.
While possible, Altel will know it's a data phone and could legally sue you for violating their terms of service.
Again, your best bet is either to change to Sprint, or swap the phone out on ebay for one from Altel.
BTC
Mogul on Alltel
I just bought a Mogul and loaded an Alltel stock ROM last weekend. It has been working great. Alltel will put the ESN in no problem if you call them on the phone. Don't tell them it is from another carrier. All they asked me was what type of phone it was.
Tools I used:
ftp://ppcgeeks.com/../Tools/QPST_2.7.249.zip -THis is used to unlock your phone if needed and update the service information from Sprint to Your Provider
ftp://ppcgeeks.com/../Tools/GetSPC.zip (finds your phone's MSL if it needs unlocked).
ftp://up.ppcgeeks.com/Titan/Users/Im...rd-SPL-MFG.exe - Run this and then your RUU loader afterwords to install your ROM
Latest ROM ver 3.52.671.9 (What I am running) @ http://www.htc.com/us/supportdownloadlist.aspx?p_id=63&act=all
make sure you have the usb cable, activesync if you are on XP, otherwise Vista has it already.
Basically you need to
1. Get the MSL code from GetSPC inputing your ESN and it outputs the MSL.
2. Put your phone in DIAG mode (##3424# ##3424 Send, or #*#3424). If it is a sprint phone, the first one will work.
3. Run QPST (you will need the MSL you obtained from getSPC
4. You may want to save the phone's configuration if you ever want to roll back to the SPCS config. Anway, Change the MSL to 000000 and write it back to the phone.
5. then run the Hard-SPL-MFG.exe program, paying attention to when it tells you to disconnect and reconnect your phone.
6. Then install your ROM by running the RUU program on your pc.
7. Now, you will need to configure service by going into DIAG mode again (probably need to use ##3424 SEND now) and using QPST change the service information to that for Alltel or whatever carrier you want. I had it easy, I plugged in my Samsung Hue R500 and copied the service information off of that one.
8. If you get all the service information right, you should be able to call Alltel, give them the ESN. If they give you slack, wait a bit and call back until you get someone nice. Persistance is the key. Then you can do *228 for OTA programming.
If you need Alltel config I will post it here, just PM me.
Scott Emick
BillThyCat said:
The problem isn't the rom, the problem is that carriers store their "own" ESN's in their systems, since the phone wasn't sold to Altel originally, it won't be in their system. There are stories of people having success getting one carrier or the other to activate other carriers phones, but it's extrememly rare and very difficult to do. The first thing you would have to do is download the stock rom for Altel for your model phone, flash it, and verify the phone boots and appears to work. At this point, you can try going into the Altel store and see if you can convince their reps to activate the phone. If they won't, then try calling customer service and see if you can get them over the phone to do it, however again, their system is going to throw up a flag when they try to activate someone other carriers phone.
If the phone doesn't look exactly like Altel's there is even less of a chance of getting it activated.
Honestly your best bet is to put it back on ebay and take the proceeds from that sale to buy a used Altel phone. You will have a whole lot less trouble.
BTC
Click to expand...
Click to collapse
Alltel DOES activate CDMA phones NOT branded Alltel. Please have all your info str8 before misinforming someone.
steps said:
Alltel DOES activate CDMA phones NOT branded Alltel. Please have all your info str8 before misinforming someone.
Click to expand...
Click to collapse
The Altel store here doesn't. I don't have Altel so I have never called their customer service, but since I see this same question asked for every other carrier and they all get the same advice I handed out, I assumed that all Altel stores were the same.
Sorry for "misinforming" someone, however, the fact that it has been programmed for sprint may cause him issues down the road... So again, I still think my advice of getting an Altel branded phone is the smartest option.
BTC
Wow thanks for the help anything else I should be warned of?
why would getting an alltel phone be any different than using a sprint/AT&T etc phone. They are all the same, just locked onto their networks for service. If he had bought an HTC Titan that was not branded to a carrier he would have the same luck as all others. Many people still buy unlocked out of the box phones. Most carriers will also add them to their services. The stores may not, but the phone people will. These companies are in business to make money and have customers and turning someone down because they don't get your free phone ain't gonna happen. Just don't tell them it was another carrier's phone.
First off AT&T is GSM, which means if the phone is unlocked you can just stick and sim card in there and bam, it works.
CDMA is different. I know I have looked at my QPST and EPST info pretty close, and there are many settings in there that are carrier specific, so that if you were to try to use it on a different carrier it wouldn't work very well. Phone most likely will work, but data is a different beast. I see dozens of people on here who flash a sprint rom on their verizon phone and accidently let customization run, once you've done this, rolling back to a verizon rom in some cases doesn't fix the problem, you have to go in and hand edit a lot of settings, the same could apply here, since Sprint apparently is different than most carriers.
I'm glad you've had luck getting other carriers phone's activated, and how many of those were smart phones? I bet most were just plain phones, in which case there isn't any problems.
I'm not gonna get in a flamewar with you, I stated my opinion, you stated yours, I feel yours is wrong, you feel mine is wrong. Lets leave it at that.
As to the OP, feel free to try to get it activated, heck, it might work, but if it doesn't, then again, get the correct carrier branded phone and you will have no problems!
BTC
One question am I able to just get the service information from my razr and use that? and if so how do I do that.
actually I am not flaming, and not stating opinion. I am stating fact. If you buy a stock HTC phone w/o contract, which would be unlocked. You can get it activated on any carrier that supports its network CMA or GSM. Smartphone or regular phone. The point is to not tell them it was from another carrier.
One question am I able to just get the service information from my razr and use that? and if so how do I do that????
scottemick said:
I just bought a Mogul and loaded an Alltel stock ROM last weekend. It has been working great. Alltel will put the ESN in no problem if you call them on the phone. Don't tell them it is from another carrier. All they asked me was what type of phone it was.
Tools I used:
ftp://ppcgeeks.com/../Tools/QPST_2.7.249.zip -THis is used to unlock your phone if needed and update the service information from Sprint to Your Provider
ftp://ppcgeeks.com/../Tools/GetSPC.zip (finds your phone's MSL if it needs unlocked).
ftp://up.ppcgeeks.com/Titan/Users/Im...rd-SPL-MFG.exe - Run this and then your RUU loader afterwords to install your ROM
Click to expand...
Click to collapse
the link to the 3rd file you listed is broken... is there anywhere else to get that file? i've tried to google it but i cant get the whole filename from the link to do so.
Thanks for any help
Actually it can be done. I done it today with no problem. Just because the epst and qpst settings are carrier specific doesn't mean that they cant be changed. What I will say is that after you have unlocked the phone and finally have your # activated on alltel via esn your sprint mogul will be functional. you have to update the prl so u wont be stuck in roaming and your data package will be disabled because Sprint uses a different server address. In order to change these settings you will use both qpst to set in hard settings and back everything up and then epst to keep the settings within the phone. the reason you wont have data has to deal with the Security and M.IP settings. its a lot to type so im not going to but if im on at any time you can pm me to walk you through it or even better you can reach me on yahoo messenger. its set within my phone as well so I can give you real time help with the settings on the spot. My messenger name is seraphazaziel79 as well.
I bought a Qwest phone sometime this Spring and I was trying to get it activated on Verizon. I flat out told them it was from another carrier, they put that in my customer file and copied down the ESN so when I called back and told them that it was a XV6800 they called me out on it. Basically lie to them from the beginning and you should be good. If they won't activate it you can sell a Sprint phone on ebay. My Qwest phone makes a pretty decent paper weight.
So I got a MetroPCS phone today, got home and started following this guide
http://forum.xda-developers.com/showthread.php?t=1303507&page=11
I did EVERYTHING exactly right.
PPP Conf:
RM http://i1113.photobucket.com/albums/k502/zander145/1.png
UM http://i1113.photobucket.com/albums/k502/zander145/2.png
AN http://i1113.photobucket.com/albums/k502/zander145/3.png
M.I.P http://i1113.photobucket.com/albums/k502/zander145/5.png
Profile 0 http://i1113.photobucket.com/albums/k502/zander145/4.png
Profile 1 http://i1113.photobucket.com/albums/k502/zander145/6.png
Display http://i1113.photobucket.com/albums/k502/zander145/7.png
However, after hitting write to phone, mine automatically restarts. Dunno if that was supposed to happen. When I try and make calls I get "TSL 02 the number or service code you are attempting is not available or accessible from your calling plan" and then the call is ended.
Did I do something wrong? I went into the metro PCS store and asked about putting my ESN in the database and they looked at my like I was speaking latin. So I asked about metroflash and they said they don't do that to this phone. Any ideas or help is greatly appreciated. Verizon was taking too long for the nexus galaxy and I really don't want to sign another contract...
I did flash the metro 3022.prl
zander145 said:
So I got a MetroPCS phone today, got home and started following this guide
http://forum.xda-developers.com/showthread.php?t=1303507&page=11
I did EVERYTHING exactly right.
PPP Conf:
RM http://i1113.photobucket.com/albums/k502/zander145/1.png
UM http://i1113.photobucket.com/albums/k502/zander145/2.png
AN http://i1113.photobucket.com/albums/k502/zander145/3.png
M.I.P http://i1113.photobucket.com/albums/k502/zander145/5.png
Profile 0 http://i1113.photobucket.com/albums/k502/zander145/4.png
Profile 1 http://i1113.photobucket.com/albums/k502/zander145/6.png
Display http://i1113.photobucket.com/albums/k502/zander145/7.png
However, after hitting write to phone, mine automatically restarts. Dunno if that was supposed to happen. When I try and make calls I get "TSL 02 the number or service code you are attempting is not available or accessible from your calling plan" and then the call is ended.
Did I do something wrong? I went into the metro PCS store and asked about putting my ESN in the database and they looked at my like I was speaking latin. So I asked about metroflash and they said they don't do that to this phone. Any ideas or help is greatly appreciated. Verizon was taking too long for the nexus galaxy and I really don't want to sign another contract...
I did flash the metro 3022.prl
Click to expand...
Click to collapse
profile 0 and 1 is wrong, metropcs is not used any more,,
its the whiterabbit msl.. http://www.whiterabbit.org/android/ calculate
edit...
did u add ur esn to metro or did the metroflash...
mdiaz33685 said:
profile 0 and 1 is wrong, metropcs is not used any more,,
its the whiterabbit msl.. http://www.whiterabbit.org/android/ calculate
edit...
did u add ur esn to metro or did the metroflash...
Click to expand...
Click to collapse
I did calculate the whiterabbit msl.
just whited it out for pics.
If metropcs isn't used anymore, what do I put?
And thats the thing, I went to a authorized dealer and asked for metroflash, they said they cannot do my phone. So I asked them just to add my esn to the database and I'll do the hard work. and they looked at me like they didn't know what I was talking about...
Try this and see if it helps any
http://forum.xda-developers.com/showthread.php?t=1305353
Hope it does
Locked & Loaded
""shooter on Deck""
laie1472 said:
Try this and see if it helps any
http://forum.xda-developers.com/showthread.php?t=1305353
Hope it does
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
Unfortunately no, I see it does replace a framework, but that isn't even part of thr problem I am having. When I asked about metroflash at the authorized dealer they didn't really have a clue was I was talking about. But I'm going to the corporate store today to get the metroflash done. Should still work right?
Sent from my PG86100 using xda premium
Just got back from 7 metro PCS stores including a corperate one, appears they refuse to add my ESN into the system, or even add a line for this phone. They will NOT metroflash it.
And apparently "All these kids are learning to unlock their phones and they want to add them to our network"
I have the $50/m plan that is required for smart phones. I searched metro pcs esn on craigslist nothing came back. I now have NO idea how to get this phone to work...
EDIT: I just tried doing *611 on my 3vo after "flashing" it to metropcs and it takes me to sprint's customer service. does that mean I did it wrong?
Just go to a dealer store. Most corporate stores stores dont wanna do smartphones(some will). But if you go to a dealer store they will houdini your phone. Which is where they write an esn from a phone in their inventory to your phone to get it into the network.When they flash it it will do the prl part for you. And if you already have the data provisioned everything will work from the time they flash it.
Reflasing on Sprint Data not working
Sorry not to hijack the thread but I think someone here might have the expertise to help me with the issue. I have a evo 3d that was flashed to Metro. I wanted to flash it back to Sprint, I cleaned the esn. Voice and txt works but data does not. I keep getting error code 67. upon more research i found out that i needed to copy NAI and AAA and HA secrets. Which I made sure were correct. However, I still keep getting error 67. Can anyone help me on how to get 3g data working? thanks in advance.
So are you trying to set up for metro or sprint?
Shot from my shooter e3dvo
mteezey said:
So are you trying to set up for metro or sprint?
Shot from my shooter e3dvo
Click to expand...
Click to collapse
trying to set up on sprint...
after fixing the clean esn and meid, my voice and sms worked fine...
data not working not even 1x. copied over the profile 0 and profile 1, including AAA and HA secrets but still does not work. When i tried hands free activation, i keep getting error 67 and profiles are wiped out.
Yea that error is because your not connecting to data. I know sprint you can zero out the ha and AAA. Where you used to have your metro msl code that needs to be replaced with your meid hex. Your gonna also need to make sure your sid/nid are those for Sprint. I do now know those off hand. One thing you can try to get those settings back is flashing a new radio it will contain the nv items you need for those spots.
Shot from my shooter e3dvo
mteezey said:
Yea that error is because your not connecting to data. I know sprint you can zero out the ha and AAA. Where you used to have your metro msl code that needs to be replaced with your meid hex. Your gonna also need to make sure your sid/nid are those for Sprint. I do now know those off hand. One thing you can try to get those settings back is flashing a new radio it will contain the nv items you need for those spots.
Shot from my shooter e3dvo
Click to expand...
Click to collapse
That's what I thought I did, The in Evo 3d, using QXDM, i set addresses 465, 466, 1192, 1194. one of the user id was my [email protected] and another one was [email protected]
AAA was 'secret' and HA secret, i copied over from the old working phone.
Just to try I also did, ##SPC# (SPC= my spc code) and reset my data, after it rebooted the phone it tried doing hands free activation but it would error out again...
i feel like i am so close yet little further from working outcome..
Yea I'm not familiar enough with sprint settings try asking some of the people in the boost flashing threads they will know all the sprint settings. You have a sprint prl right? Not one of the hybrid ones to roam with vzw
Shot from my shooter e3dvo
mteezey said:
Yea I'm not familiar enough with sprint settings try asking some of the people in the boost flashing threads they will know all the sprint settings. You have a sprint prl right? Not one of the hybrid ones to roam with vzw
Shot from my shooter e3dvo
Click to expand...
Click to collapse
Yeah I have the Sprint prl 21081 and PRI 1.24_003
It is not the latest PRL, but should it even matter which version i have? i thought PRL was only for roaming settings?
That will make all the difference when it cones to calling customer service if you have a metro prl it will call metro Ect. Ect. But sounds like you got that. There's threads on flashing back to sprint do an advanced search here and if its not here its on android forums it might be for EVO 4g but settings are the same on 3d
Sent from my PG86100 using XDA App
Only 1 metro store within 20 miles will flash my phone.
And they charge $63! I could just buy houdini master key for 50!
They also said that they have never successfully flashed a EVO 4G...
Can some1 sorta explainthe process of flashing to metro i had my Evo flashed by a guy that im sure knows what he is doing and everything went smooth. Now my sis and bro both got themselves Evos but this dude keeps on givin the run around and switching up the prices one phone was already being used w. Metro when bought but he insists that it needs to be "reflashed" (since its been on metro b4 wouldnt he just have to activate it to the existing acct?) the other has never been flashed. what im mostly wondering is, besides adding the esn into metro network is there anything else that MUST be done by a metro dealer? Is this thread for actual flashing or for provisioning like bloody's guide?
Sent from my PC36100 using XDA App
You won't find any guides that truly show how to flash. Technically all the guides here do show you how to flash them. But metro is using a differnt method to flash now. So its not as simple as giving them your esn to have it added. They write an esn from a metro branded phone to yours. As far as the one that was flashed already all you need to do is call metro from it. Then provision the data from bloody or jds guide in order to get web and mms.
Sent from my PG86100 using XDA App
i nevered seen this little guide right here... haha....
what happens is this,
msid 9412333323 or 9412340237 or 7272271341
u can use this number i think, any metro msid number near u. i had these saved, from my new evo, and old touchpro,
u have to use a metro number for it to connect or something...
I did both of the following steps..
I did bloodys provision and at the same time i looked for the msid num.
in qpst u need to go through all the pages, i think i found the old number in 2 or 3 spots... if its a number change..
in DFS...
MIN A = USE ur 10 digit phone number,
MIN D = USE the msid number,
add any metropcs prl and u should connect to metro before any flash, change ur number or whatever...
i manually flash my 2 evos, but the 1st metroflash to add the esn, the internet and mms worked out the door,
The second in ebay 45 to add the esn, then I dialed *228 and it worked..worked on the first shot,,, after it was added.. it was activated with my acct.. yeah..
edit: 12-23
##3282# under ADVANCED u will see MSID