hy there,
so i have a problem with my startrek.
when i start with romupdateutility, i became a message like this:
Error (270) : Update error
The image file is corrupted. please check your update utility.
So does it means, that the cidunlock or application unlock does not work at my handy?
greats
René
What o.s. are u used? Vista or xp? Because with xp there is no problem, with vista you must change the spl or change the driver of the device in the pc...
If u use vista,search in the forum..the problem is solved
Hey Slavix
Thank you for the answer, i have found the thread, and installed new drivers, yet it works. Thank you so much.
greets
René
I can ROM my startrek
Wyverex said:
hy there,
so i have a problem with my startrek.
when i start with romupdateutility, i became a message like this:
Error (270) : Update error
The image file is corrupted. please check your update utility.
So does it means, that the cidunlock or application unlock does not work at my handy?
greats
René
Click to expand...
Click to collapse
I have the same problem, I used XP and the messege is the same. I don´t know what to do.
Hey,
So i explain to you, how i did it work.
First i made sd application unlock, and cid unlock again, maybe it has not worked at the first time.
After that i found this thread and installed new drivers on windows vista. so yet it works.
i give you the link to the thread:
http://forum.xda-developers.com/showthread.php?t=288753&highlight=usb+driver+bootloader
greets
René
it is not necessary to make a CID Unlock (SuperCID) again
Try sd card
Look for post titled "Flashing ????????"
it should help.
Related
Hi,
I tried to upgrade my Himalaya to the latest O2 image (.187) with the
instructions mentioned by DCS. Changed also with the hexeditor the file
to reflect the new operator id, and still have the country id error. Even
worse, the update aparantly started to work since it put my device in the
bootloader mode, and now nothing works anymore....
Anyone ? First of all, getting it out of booloader mode would already be
nice....
TIA !
Willem
Why not use er2003edit to change the operator instead of a hex editor?
This tool can be found on this forum.
Mark
Just try to chage operator etc. once again with er2003edit and then reflash it...
If it will not work, you can still fix it with SD card.
buzz
tried to uppgrade my device. upgrade failed.
On rebooting i wont go into bootloader mode, the blue led will just flash.
Is my device beyond rescue???
markutah said:
Why not use er2003edit to change the operator instead of a hex editor?
This tool can be found on this forum.
Mark
Click to expand...
Click to collapse
Hi Mark,
Tried that, changed it to CDL and WWE as seen in the file DeviceData
and tried again, same error again. I have the 1.06 bootloader, so I cannot
use SD-Card images... (as far as I understood)
Anyone any clues as how to get out of the bootloader screen ?
Willem
please check this thread:
http://forum.xda-developers.com/viewtopic.php?t=12618
buzz
buzz_lightyear said:
please check this thread:
http://forum.xda-developers.com/viewtopic.php?t=12618
buzz
Click to expand...
Click to collapse
Tried that, to no avail, thanks for the tip !
Solved the issue, checked with google for HimaUpgradeUt and found
a version that does not do the countrycode check... It was mentioned
by the person on that forum as a 'very last resort' method. Well, for me
it worked fine. Here is the link.
http://d.tachet.free.fr/utilrom/free/HimaUpgradeUt.zip
Regards,
Willem.
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
Hi,
i have a very big problem with my XDA (HTC Prophet).
I already had a WM6.1 Rom on my device but wanted to change to a different rom.
Now my Device is showing me the RGB screen after upgrading. The UpdateUtility works fine and i get "update successful" after the updating.
Now i can just install the original rom from O2 (WM 5).
Does anybody know a solution for my Problem?
Thanks and Greetings
MrDCA
Can you get the device to start up after installing the WM5 ROM?
What you will need to do is follow this to recover it: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
And then HardSPL before flashing a new WM6.1 ROM.
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
mrdca said:
Thanks a lot l3v5y.
But there is still a problem. If i want to HardSPL my device i get an error.
Error 208: File Open
The update Utilite can not open the requested file. Please Check your update utility.
My SPL is 2.15.0001 so i have G4.
Sometimes i get this weired message:
Error 300: Invalid Update Tool
This update tool cannot be used for your PDA Phone.
Please get newer Update Utility.
Click to expand...
Click to collapse
Would you like to try my tool? (@ my signature~~, hope it works for your situation... )
You're using prophet tools? I think there is a slight issue with that, but I've fixed it and shall upload it now...
I tried both utilities.
none of them works for me.
Let me know if you uploaded the fixed version and i will test it!
Thank you guys!
The fixed version is now uploaded in the Prophet Tools thread. If that fails, you can use the HardSPL utilities from the New WM6 Upgrade guide.
Hello guys...
first of all, excuse me for my bad english...I'm not an oxford student
I got a topaz from a friend to remove the russian language and flash a german ROM.
He knows that I know much about Android and flashing etc. But I didn't know that it will be harder to understand WinMob than understanding Android.
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
After that, i copied the necessary file for manual flashing into the phone, executed it and started the manual mode, which gives me the 260 CONNECTION error.
Phone is connected and sync. Installing the enabler*.cab didn't help.
I don't know which information you will need. So, I will now write down what I think could be important.
Tricolor-Screen:
TOPA100 32M
SPL-1.33.0000
Under the battery:
HTC Touch Diamond2 T5353 RUS
White field says "USB", I think this is supposed to be important.
So...What do you suggest? I promised him to bring him his new, cool phone tomorrow... I think I can forget that
What should I do now? Thank you in advance...
geminga said:
Hello guys...
first of all, excuse me for my bad english...I'm not an oxford student
I got a topaz from a friend to remove the russian language and flash a german ROM.
He knows that I know much about Android and flashing etc. But I didn't know that it will be harder to understand WinMob than understanding Android.
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
After that, i copied the necessary file for manual flashing into the phone, executed it and started the manual mode, which gives me the 260 CONNECTION error.
Phone is connected and sync. Installing the enabler*.cab didn't help.
I don't know which information you will need. So, I will now write down what I think could be important.
Tricolor-Screen:
TOPA100 32M
SPL-1.33.0000
Under the battery:
HTC Touch Diamond2 T5353 RUS
White field says "USB", I think this is supposed to be important.
So...What do you suggest? I promised him to bring him his new, cool phone tomorrow... I think I can forget that
What should I do now? Thank you in advance...
Click to expand...
Click to collapse
the following questions will be about the Automatic mode (not Manual mode):
is the only error you get is the early close error, after pressing "OK" for preparing to flash? if yes, what OS version are you running (and is it physical installation of Windows)? and what do you see on phone screen? also, exact error text = ?
Hi, thank you for your reply.
I'm using Win7 x86, not virtual or something.
After "Preparing to flash, please press OK now and wait" I get a Fatal Error
"Hard-SPL is for non-commercial....." It tells me that I used it before, what I definitively did not.
After that the following pops up:
nobody any idea?
I now flashed
RUU_Topaz_S2_HTC_RUS_2.53.411.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
trying Hspl-flasher again...
doesn't work. automatic mode fails the same way, and manual mode comes with congrats for flashing hard-spl once i click the button. but tricolor doesn't show me any hard-spl...
i don't know what to do with this piece of §#$X
geminga said:
Hi, thank you for your reply.
I'm using Win7 x86, not virtual or something.
After "Preparing to flash, please press OK now and wait" I get a Fatal Error
"Hard-SPL is for non-commercial....." It tells me that I used it before, what I definitively did not.
After that the following pops up:
Click to expand...
Click to collapse
you need to send a ticket at http://support.htc-unlocks.com/ to get a free license (for personal use). note, when you send it, you should get a confirmation email with the ticket number, be sure to keep that.
Alright, I will check it out, but those tickets are for purchased stuff or not?
geminga said:
Alright, I will check it out, but those tickets are for purchased stuff or not?
Click to expand...
Click to collapse
as said, free for personal use.
Alright, its done.
I there any other way to flash a german ROM on that russian phone?
Soft-spl or something?
geminga said:
Alright, its done.
Click to expand...
Click to collapse
you got reply to your message
HI i got the same problem can u help me 2 but from german to english ??
farooq88 said:
HI i got the same problem can u help me 2 but from german to english ??
Click to expand...
Click to collapse
it would be best to post in the Hard-SPL thread.. please post in that thread telling us: what is your exact issue? did you try Hard-SPL and you had some error? what was it?
thread is here: http://forum.xda-developers.com/showthread.php?t=520312
[/QUOTE]
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
[/QUOTE]
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
[/QUOTE][/QUOTE]
can you quote the rest of the message please ?
do u know u can read the rest on the 1st page ????
farooq88 said:
do u know u can read the rest on the 1st page ????
Click to expand...
Click to collapse
so it said "commercial error"?
http://support.htc-unlocks.com/
you have to send us a ticket with the phone's imei to get it enabled - free for personal use.
link: http://support.htc-unlocks.com
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Sim0cYz said:
Hi all! My Niki 100 isn't getting any signal / service. I live in Italy, my htc is factory unlocked.. I've tried some Radio ROMs, but no luck with any of 'em. What should I do? Thks
Click to expand...
Click to collapse
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Hakim Rahman said:
what you have try with Niki SuperCID and Security Unlocker by jockyw ??
if not, you should check on this thread http://forum.xda-developers.com/showthread.php?t=395945
Click to expand...
Click to collapse
hey thanks! I'm trying this way. will let you know
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Sim0cYz said:
Stuck on Supercid-niki.exe, can't execute it. Error:
\\.\WCEUSBSH001: No such file or directory
cannot connect to \\.\WCEUSBSH001
what should I do? I'm on Windows 7 x64 Pro. Tried to change usb port too
Click to expand...
Click to collapse
You should first understand the instructions and tried to install WMDC for Windows Vista 64bit on your own computer! WMDC can you get on http://www.microsoft.com/download/en/details.aspx?id=3182
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Sim0cYz said:
well, i already installed it, it's not working for me. i'm trying with Windows XP on an Oracle VM VirtualBox!
Click to expand...
Click to collapse
Ok, seems to work on WinXP @ VBox, but now I got stuck at two first lines
=== Niki SuperCID and Security Unlocker (c)2008) by jockyw2001
=== Donations happily accepted, paypal to [email protected]
but the tool won't continue doing his job..
I have the same problem: I have followed all the steps (Security Unlock, ROM isntallations, RADIO installations) but still no service (and with a Nokia I have full signal).
Ok, the problem was that I had installed HardSPL 1.22 instead of 1.15.
I flashed an official ROM, flashed HardSPL 1.15, flashed the suggested radio (1.58.21.23).
After that I ran the SuperCID, on my VirtualBox Windows XP based, disabled usb connection in ActiveSync, then it worked in a second. Nice! At the boot now I get "Security Unlocked".
Now I flashed the radio "RUU Nike Radio 1.58.21.23S Modded"
Going to insert my sim and check out
Ok, the Connection Setup installed the vodafone IT config, trying to reboot now..
Always the same.No Service.
If I try to press "Find Network", it takes very very long, after that I get "No Service"..
if I choose Network Selection "Manual", it can't retrieve the list of networks, says:
Cannot read settings from the network. Try viewing settings later, or disconnect data connection and try again.
Same if I try "Set Networks".
What can I do?
Tried another Radio,
1.58.21.23S Modded
1.64.08.21K
1.71.09.01K
Are not working for me.
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Thx @Rataplan, indeed I have HD2. This is my wife's phone (she replaced her BB with this one). I tried also an original ROM, but doesn't work. The thing is that in my house I don't have signal, but outside is ok; so this means that the antenna is a little bit weaker than others.
Rataplan said:
I'm afraid it's a hardware failure, the only thing you can try, is to flash an original htc rom which can be found HERE and keep us informed.
@ ady_uaic , the same answer to you, but in your signature you own a hd2, if you only have a hd2 you have to go to this LINK.
Succes guys or gals.
Greetz,
Click to expand...
Click to collapse
OK, i'm trying the ITA rom (i'm from italy). Will let you know for sure.
tried. it's not working..
Sim0cYz said:
tried. it's not working..
Click to expand...
Click to collapse
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Rataplan said:
That's bad, I'm afraid that your antenna is broken.
Sorry Sim0cYz
Click to expand...
Click to collapse
Thanks for your help, do you know how could i fix it?
Sim0cYz said:
Thanks for your help, do you know how could i fix it?
Click to expand...
Click to collapse
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Rataplan said:
HERE can you find the Service Manual, maybe you can fix it yourself.
Succes
Click to expand...
Click to collapse
hey thanks, u're a PRO! let me see!