Hi,
i tried to flash my Charmer with "TouchFLO Charmer WM6_GER ver. 2.7 BETA by mschmitz". After reboot it stucks on the bootscreen. i tried to flash the original t-mobile firmware via bootloader but it can't solve the problem - same ****... i tried different firmwares - german and english - but no one works :/
Any idea? please help me -.-
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Keep smilin
kiffw said:
no ideas? so i have to bring it to my vendor...
and i thought this is a good board...
Click to expand...
Click to collapse
Give it to me - I'll take it ;-)
I had the same problem and got it working again this way:
1. Download AKU 3.3 from here:
http://www.t-mobile.de/business/downloads/start/?area=34&handy=291&product=27000592
(you may use WWE too i think)
2. put your phone in bootloader mode:
turn off - press&hold camera + turn on (you should see an rgb screen)
you can also press&hold camera and hit reset
3. Run RUU_compactII.... (downloaded before). It will not show a current version number, thats OK.
4. after the downgrade: hard-reset by holding camera+record and reset, then green button. I don't know if this is necessary - but i did it this way)
Now you have a running phone.
I tried to upgrade to beta 2.7 again. First there was an error message in the log - I had to kill the activesync process (wcescomm.exe) and restart it.
Now I have beta 2.7 up and running!
cu
1.
Is their a cab file which makes the top and bottom task bars transparent?
2.
Can this option "tap to scroll" in email be automatically on every time i open a mail?
3.
I have a problem when calling somebody, after i call and talk hd2 goes to start menu.
Sometimes he doesn't go to start menu he just flashes few times, and not letting me time to hang up.
I happens every time i have a call. Phone just freezes or goes to start menu or something else wrong. other operations like surfing, sms... are ok,
Please help i have newest 3,14 stock rom
regarding question 3; did you remove HSPL?
the problem you mention is typically if you use stock ROM 3.14 in combination with HSPL.
Hi
I instaled stock rom 3.14 wia memcard. so i think i dont have HSPL
Has anyone seen this problem, i have HSPL and maglr installed, with NAND android flashed, the menu button activates the volume adjustment up, and the green button is down,,, i cant use it like this, tried like 5 different builds and get the same problem,, should i flash a new radio?? PLEASE HELP VERY ANNOYING
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
dj_memory said:
i had the same problem.
and no idea how to fix it. also on gingerbread.
so I'm back on WM 6.5
but now i have there an other volume problem!
@ PIN screen or later by HD2 hang up on Volume adjustment.
it's like permanently pressing VOL down.
its impossible to do anything :'(
some times i see a error message "cannot open " file" blabla..."
i tried a lot of diff. ROMs. alsways the same.
also HSPL new, Task 29, newest radio.... and so on.
Click to expand...
Click to collapse
Yeah, i have tried everything also... it started after i flashed HSPL, i hope somebody has had this issue that they were able to fix it, and share with us
possibly the same error as i had?
hy,
it is possible that you have the same hardware caused error as I have?
see my other post http://forum.xda-developers.com/showthread.php?t=829938
Hard SPL your phone first before proceeding.
Don't let your battery to discharge completely, if it happens, connect the charger (red led appears), take out the battery (with the charger still connected, red led remains on), put the battery back (orange led appears) and then fast turn the phone on and enter bootloader mode because there the phone is charging even that no led is on.
Google Android kernel build working from NAND memory.
I am glad to introduce you the result of our hard work, based on the android kernel and tinboot bootloader, made by DZO. I am, vsavichev, working on kernel, my friend hrustile- on design and system, and my friend blyha- on the hardware researching and testing part.
HOWTO Installation process.
Doing on the security unlocked phone under your own responsibility, all unlocking info is here: http://forum.xda-developers.com/showthread.php?t=355730
1. Download Nikeimg.7z, archive contain 2 images, for 20 or 16 keys keyboard.
2. Flash it like usual firmware, which means:
2.2 From the SDcard:rename file NIKEIMG16K(20K).nbh to NIKEIMG.nbh and put it to the root of SD card. Make folder named "andboot" in the root of your SD card and put there android build itself, which usually named "androidinstall.tar",if not, rename it. My recommendation is this one, from my friend hrustile : http://www.multiupload.com/OYW85PFMH1. No need to format SD card or remove any files. Turn off your phone and reboot to bootoader mode (e.g. hold CAMERA and POWER buttons) Then phone will detect itself that there is a firmware is on your SD card and will ask your to press POWER button, so press it. Flashing takes about 20 seconds, after it's over pull the battery or press reset.
2.3 From the PC: same procedure exept no need to put NIKEIMG.NBH on the SD card. You need to put it to the folder with flasher on the PC. The rest same as SD card flashing.
But it's not all!!!
3. Turn device on and wait until i says "Hold down Volume Up or DPad Center to launch installer" press and hold central button, you'll see installer menu. If you missed yo press button- reset and press it directly after seeing some output on the screen.
Choose Data & Sys on "(*) NAND" and press Install android, then answer yes twice. Now installation process is started, wait for a minute or so.
4 And at last after installation is over press Quit, first boot takes some time so be patient. Then enjoy your Android.
Click to expand...
Click to collapse
Working:
1. Sound
1.1 Loud speaker
1.2 Voice speaker
1.3 Headset
1.4 Volume adjusting
2. Network
2.2 Bluetooth
2.3 GSM
2.4 GPRS/EDGE/3G
3. Camera
3.1 Main
3.2 Front
4. Hard Buttons
5. Display
5.1 Touch
5.2 Calibration
6. Power Managment
6.1 Hybernation(Sleep)
6.2 Brightness Adjustment
7. Vibration
Works/Not works
Click to expand...
Click to collapse
Here are the last tested images, archive contains 20k and 16k version. I tried some radios, the best one was 1.71k.
Thank you for your hard work！
Darkforcesteam HD2 Forum developed the android, not a simulation. You can contact them, it is possible to obtain some information. If you need darkforcesteam forum account can contact me, my mailbox [email protected]. My English is poor, which is out through Google translations. Sorry.
Can you solve the BUG android on Chinese support it?Thank you
No, chinese is so far from me, im russian.
First, thanks for the advanced work!
I try this last night, and it looks great and smooth, but I have a problem for it.
Mine is Niki100, the screen touch function seems not working properly. I can't finished unlocking the phone, the screen froze after I slide it from left to right.
Anything I can try?
Looks strange for me, if problem is in locked screen only you can unlock it with double pressing of camera button. Then, if screen is still frezed, long press on POWER and then the RED PHONE, sometimes helps. Anyway, the work is very far from over, so i hope there will be a lot of improovments, this build i put here only to show that there is a hope, because all the previos threeds ended so hopeless.
thank u for your work!
but my phone raido is 1.59,your rom can't work on my phone ,if you fix this BUG, it will be perfect!
I don't think it's possible to fix a kernel for a specific radio, but it will be very useful for me, if everyone who tests my build will post the issues wich he will have for sure and the radio version, so i can find the problems, caused by radio and the problems, caused by kernel.
Latest news, now internet connection working.
What's new? Network connection in my cell phone is normal.
Some improvements, now we have all the functions, like under HARET.
How to install?
It seems when I long-pressed the icon (want to delete home screen shortcut), the screen touch works no more. Sometimes It randomly happened when I press several time short-pressed. Other than that, the phone function works fine, and 3g connection is fine too.
vsavichev said:
Some improvements, now we have all the functions, like under HARET.
Click to expand...
Click to collapse
Do we have update for niki16k ?
poyfoster How long does the screen touch work before freeze? Or it happens just after boot? Please, post your radio version, i need it for statistics too.
About 16k update- you are the first to ask, no problem, i'll make one for you in a couple of hours.
It's this a rom?
How to install ? Its only androidinstall.tar and ZIMAGE. There is no default.txt and Haret and initr.gz, I download this package but still dont know how tu run it. Maybe someone can explain me, my device is HTC touch dual NIKKI 20 keys
It works from NAND, wich means your windows mobile will be gone. So you need to be very sure what are you doing before do something.
So if you still want to flash android, you need to put NIKEIMG.nbh on the rootof sd card,
androidinstall.tar and androidupdate.tgz to /andboot/ folder.
Turn off the device, hold CAMERA and POWER buttons, until you get to bootloader, then press power again.
Now press reset or pull battery off, then power on your phone. After splash screens you will see some fast running output, when you see something like "Hold center or volume up button to install" you need to hold center button. All the other stuff is like usual HARET installation, exept you need to put systrm and data on NAND in installer. After install complete, you need to install update before exit.
I need 16K，thanks
I got problem with updating my phone to newest android version (JB)
I download update pack properly, press install now, after that my phone restarts and on screen appears 2 green arrows, picture of some mobile and loading bar.. this is still normal, but after that, aprox. 30s.. instead of green arrows there appear question mark, my phone restarts and update is not going to happen.
Hard resets of phone dont help, any ideas how to fix this?
Thanks
I have the same problem. Can you advise me how to fix it
OK. I found the solution for red question mark. Remove the SD card and download the update to your phone storage. Finally, let the install.