help me
i flash my 838pro now can't poweron when i press power key in three
color screen model
i can't remember what version rom i flashed but when process 11% stop
report 262 error use ruu update
now i can see the infomationg in three color model:
herm100
ipl:1.04
spl:2.10.01ipro
what can i do can save my herm 100
orange spv m3100 branded
Do HardSPL V7 and then try again.
download HardSPL V7 from below link
http://forum.xda-developers.com/showthread.php?t=296722
Related
Hi
I tried to unlock my orange m3100 (swiss) SPL 1.04. When I run the MaUpgrade I get the ERROR message 120 Country ID mismatch and the program quite / radio rom version remains at 1.06.00.00.
Please help me - thanks
Surely your running the MaUpgrade_noID.exe program??
S.K.
Which bootloader do you have?
[edit]Sorry-I just saw you listed 1.04 in your original post[/edit]
Run the software when your fone is under the tri-color screen mode, rather than wm 5.0
I have a htc tytn (vodafone version) and i want to upgrade to wm6 Windows Mobile VI Pro - Black 3.0.1 but i dont know how i cant find the spl and ipl in the phone and the radio. It is Unlocked
Here is some Info:
Rom Version : 1.20.161.6
Rom Date : 08/02/06
Radio Version : 1.03.06.00
Protocol Version : 32.34.7010.01w
Are you serious?? turn your phone of, hold the OK button and then hit the power button.. you will see your IPL and SPL there...
See
The numbers are red i cant see them
First things first.
Put HardSPL on it. After that you should be fine!!
I tried the following steps on my O2 Xda Mini S and after rebooting it doesn't show the SPL is 2.21.olip. It just show the original version.
Any help out there?
-connect your device
-Start hard_SPL-G4.exe
-Push the "Check DOC" button
-> The tool now checks whether your device is truly a G4, if not, it will give you an error and stops.
-> after this a dos box pops up, and it loads the softSPL to your device, to enable hard-SPL flashing.
-> then a Rom Update Utility will start, ONLY proceed if your screen is white!
-Proceed with the upgrade, it will only take a minute.
After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip
Thanks
What is your current ROM, IPL/SPL?
Have you tried another USB port, or even another computer?
try to ugrade other rom (try the new TNT )version but take care ROM must be without ipl and spl !!!
here is link for version with ToucFlo
don't forget to use MUN's RUU
make the update on yours root drive !!! C:/ !!! i mean the update and ROM files must be on it !!!
Let the proccess going to the end and if it stops at 99% don't panic
wait and it will end and restart !!!
to mrobo and equinoxe
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
its g3. Read damn topics
mghandour20 said:
thanks both of you for your reply.
i haven't tried different computer(my other computer is a mac), but i have tried different usb.
Following version.
IPL 2.21.001
SPL 2.21.001
GSN 02.07.10
OS 2.21.4.1
Rom version is still the one that came with it from O2.
Do i need to do the hard_spl before upgrade the rom to one of those you told me?
Thanks .
Click to expand...
Click to collapse
ignore kubek1334
Do you mean IPL 2.21.001 SPL 2.21.001 or
IPL 2.21.0001 SPL 2.21.0001?
Does anyone have a stock-standard JasJam with Telstra in Australia, which has never been upgraded with HardSPL or a cooked version of WM6?
Or if you have upgraded, can you recall what the stock standard settings should look like ?
When I enter into bootloader mode (if that's the correct terminology) by holding down the OK and Power buttons, and pressing the reset button at the bottom of the unit with the stylus, what should I see ??
I am currently seeing -
HERM100
IPL-1.00
and
HERM100
SPL-1.06
Is this the way it should look if it has never been upgraded with HardSPL or a cooked ROM ?
Thanks in advance.
Why do you need to know this?
If it is for warranty, dont worry - I sent mine back with a cooked ROM and HardSPL and they fixed it no worries at all. They did however flash it with the latest Telstra firmware, which I promptly replaced when I got home.
Cheers!
I'm looking at my very green eBay purchase of an untouched Telstra JasJam.
IPL Ver 1.01
SPL Ver 1.06
(lets see how long it takes me to brick it)
oblongit said:
I'm looking at my very green eBay purchase of an untouched Telstra JasJam.
IPL Ver 1.01
SPL Ver 1.06
(lets see how long it takes me to brick it)
Click to expand...
Click to collapse
NO lets not.
Flash HardSPL BEFORE DOING ANYTHING.
bricking jasjam
I agree with MRVANX, I highly recomend not to brick the jasjam, I accidently bricked mine only response I got from it was the red pwr led, totally stuffed and a waste of A$1300
my Jasjam was
IPL : 1.01
SPL : 1.11
This was a stock jasjam from telstra as of Oct. 06. Not that anymore.
Hi!
I have got an htc touch dual from ebay.Its french and from SFR.
Its sim free.I press camera+power and appear that I have SPL-1.16.0000
I´ve tried to do a hardSPL using flash-uspl-niki but when its going to do it the bar on pda stucks at 0% and appears an 262 error on my pc
Please, Can anyone help?
Thanks in Advance!