hi everyone,
i have a huge problem. my rom flash for my i-mate (qtek 2020, mdaII, XDAII) hung during flashing (from 1.66 to 1.72 official i-mate rom) during the ce upgrade step 2. now my i-mate just hangs at the blue i-mate screen and i cant connect to it through pc anymore, get error 101. is there any way to get a good rom on it again (can i connect to the ppc by another way, other software or sd-card0 so it will work again, or does it have to be epaired at at a rapaircenter?
thnx, sorry for the bad english
See the pm i send you.
I have the same problem ...
plz tell me how u solve it
Best regards
plz help, i-mate dead after failed flash, error 101
Hi,
If all that happened was it hung during upgrade you can put the device into bootloader, power+d-pad+softreset button, and attempt upgrade again, but if OS you were upgrading to is corrupt causing the hang a new rom might be the way to go, www.buzzdev.net has everything i needed, or clubimate.com
I have same problem. My q-tec100 is reseting so I can' connect it to pc for flashing again. Please tel me what is bootloader and what is d-pad button so thad i can stop it from reset and connecting for flash
hi friends i have the same prob. somebody plz help me too
During th eflash of my rom radio with 1.54.00.10 the program stopped and my mobile restart in bootloader.
The problem is that the flash program doesn't want to restart flashing and my mobile stay on bootloader menu.
HELPPPPP Please..
What do you mean by "the flash program doesn't want to restart flashing"
Did you try to flash your original shipped ROM entirely to the device?
What is IPL/SPL on your device?
Sorry for my english...
I flashed with RUUWrapper.exe on my PC with usb connection but during the verification the soft said me error 260 the device not connect.
Is there a possibility to flash the rom radio without PC, directly on my mobile ?
Thanks
on the bootloader screen :
HERM200
IPL-1.04
HERM200
SPL-2.03
Looks like the FLASHING TOOL is not compatible to your device! What OPERATING SYSTEM are you using?
I am not sure if your device is already CID unlocked?
If you run on XP and your device is CID unlocked use the CustomRUU (search the forum), if not: read the WIKI!
My device is unlocked and I use wwindows XP
How can I flash with serial?
this is what you get for not flashing Hard-SPL. idiot
I'm ok but how can I do?
please...
HELLLP (ive been upgrading since the xda II) and i recently got a tmobile hermes with wm5! then got wm6 upgraded it and got to about 78% and my pc died and then i tryed recovery did not work had to go to work so i left it! got back and ive tryed so many more upgrades of the image with no luck its stuck on splash screen! ive placed it into bootloader mode then ran ruu wrapper and it gets to the bit of updrading (25mins and a progress bar) and the phone goes white with upgrading image 0% then on the pc i get error 262!! and thats as far as i got please can some1 help thankyou so much
here is all my information that ive got!
bootloader mode = herm300 IPL -1.01 (in white text)
Herm300 SPL - 1.04 (yellow text)
when i restart the phone and its stuck on bootloader mode this is the info
m 05 - r 1.05.05.00
s 04 g 32.36.7010.04h
b 06 d 3.62
please can u ask as many people as you can ive known about this since the xda II days but never needed help and i know some1 can help this is a great website and forum thanks
Hello together,
I got a T-Mobile MDA Vario II upgraded to Windows Mobile 6 and like to use thisone with a Vodafone SIM.
Here some Data about:
(Info from the Bootloader)
HERM300
IPL-1.04
HERM300
SPL-2.03
Systeminformation:
ROM-Version: 3.60.111.4
Radio-Version: 1.50.00.00
I've tried to Downgrade to WM5. I've tried button_rom.
I've tried everything, i have found about Down / Upgrade, about Sim-Unlock etc. etc. etc. ....
But i'm to Stupid to Sim-Unlock this MDA.
Always when I try to Downgrade to WM5, the Setup starts normally.
After the MDA enters the Bootloader the Setup will show an error like "no device....".
What did I wrong?
Please help me :-|
Thank You All!
PS: Sorry for my bad english..i hope, you understand me
tbler said:
Hello together,
I got a T-Mobile MDA Vario II upgraded to Windows Mobile 6 and like to use thisone with a Vodafone SIM.
Here some Data about:
(Info from the Bootloader)
HERM300
IPL-1.04
HERM300
SPL-2.03
Systeminformation:
ROM-Version: 3.60.111.4
Radio-Version: 1.50.00.00
I've tried to Downgrade to WM5. I've tried button_rom.
I've tried everything, i have found about Down / Upgrade, about Sim-Unlock etc. etc. etc. ....
But i'm to Stupid to Sim-Unlock this MDA.
Always when I try to Downgrade to WM5, the Setup starts normally.
After the MDA enters the Bootloader the Setup will show an error like "no device....".
What did I wrong?
Please help me :-|
Thank You All!
PS: Sorry for my bad english..i hope, you understand me
Click to expand...
Click to collapse
I think the RomUpgradeUt.exe that exists in the wm5 ROMs is not compatible with SPL 2.03.
try this:
Extract the .nbh file from your desired wm5 rom (Rename your ROM from *.exe to *.zip and extract it using winzip).
Flash it to your device using RUUwrapper.exe (Force using SSPL).
:,-(
Hey together again,
now i've made the update.
It shows no error or something other.
The MDA looks like a WM5 device - But it will stop booting when it shows the first WM5-Picture.
Ok...now it will stop when it shows the "T-Mobile" Splash Screen..
Well....one Softreset later .... i have a white Screen
This i have already done:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
The SPL is 2.03 again.....
Now I can't go on with the RUUWrapper ......
Is there any posibility to Update the MDA while staying in the Bootloader (works without problems).
Thank You Again
Greetings from Germany
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Hello Again,
i've tried to perform the update this way.....but it won't work :-(
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
Any Idea? I've tried the WM6-File from the T-Mobile Page, the WM5-File....
No of them will work.
Thanks again!!!!
Have a look through this...
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
might be of use, havent had a change to read it fully so it might not be any help.
tbler said:
Hello Again,
i've tried to perform the update this way.....but it won't work :-(
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
Any Idea? I've tried the WM6-File from the T-Mobile Page, the WM5-File....
No of them will work.
Thanks again!!!!
Click to expand...
Click to collapse
I don't understand your situation exactly??
Do u have wm6 on your device now?
Can ur device boot into os or not?
Do u have NO GSM error?
Hello,
i've read the manual.
But it won't help me.
The Autor wrote this:
"Connect the device up to activesync using the USB cable, then run RUUWrapper.exe"
My Problem: Windows Mobile 5 or 6 doesn't Boot - So i can't use the RUUWrapper....
To enter the "special" BootLoader I need an working WM5 or WM6....
Do you know, what I mean? My english isn't the best.. sorry :-/
@koorosh_bsboys
- I DON'T have the "NO GSM" Error.
- My OS does not Work.
- The device looks like it's a Windows Mobile 5 (i can't see more, because it doesn't boot | It will stay at the blue Screen ("Windows Mobile" and the Windows Logo)).
- Update per SD-Card brings the following Situation:
I insert the SD-Card, load the Bootloader, after this, the Display show's:
"Loading...."
After this:
"Checking..."
And for a Short time
"00028002
Not Allowed"
Then I'm in the RGB-Colored Bootloader......
please exactly tell us your problem
1.IPL version?
2.SPL version?
3.Can boot into OS?
3.KITL enabled or not? (hold Power+comm manager+left ok buttons and reset with stylus, keep touching them until you see the KITL dialogue - if enabled-)?
4.NO GSM error?(when restarting ur device look out to bottom of the screen, do you see NO GSM)
koorosh_bsboys said:
please exactly tell us your problem
1.IPL version?
Click to expand...
Click to collapse
=> IPL-1.01
koorosh_bsboys said:
2.SPL version?
Click to expand...
Click to collapse
=> SPL-2.03
koorosh_bsboys said:
3.Can boot into OS?
Click to expand...
Click to collapse
=> NO (So i can't run the SSPL)
koorosh_bsboys said:
3.KITL enabled or not? (hold Power+comm manager+left ok buttons and reset with stylus, keep touching them until you see the KITL dialogue - if enabled-)?
Click to expand...
Click to collapse
=> I hold the Buttons for about 1 minute....but i will stay in the 3-Colored-Bootloader - So I think - Not Enabled
koorosh_bsboys said:
4.NO GSM error?(when restarting ur device look out to bottom of the screen, do you see NO GSM)
Click to expand...
Click to collapse
=> Yes, now i've seen the "NO GSM" Error....(http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 <= Method 2 I've tried...but won't help!)
I know....i made something wrong..but i don't know what :-(
Sorry to tell you that dude!
But welcome to the club of bricked hermeses with spl 2.03.
Until now there is no known sulotion to fix that, unless you want to send ur device to service center!
OK...that's very ****, but i can't change this.. *damn* :-(
I have one more MDA Vario II with WM6, SPL2.03 and IPL 1.01
=> WORKING....
But i think i'll unlock this one by the "T-Mobile-Sim-Unlock-Code".
I won't risk the second mda ;-)
THANK YOU VERY MUCH!
Why Flashing...?
Go to any vodafone store..make your device back to WM6..
say to the guy @ vodafone store that your going on a holiday.. they will give you a key that unlocks the device..
and your done ! ! ! Works for a friend of mine
ElProempie said:
Why Flashing...?
Go to any vodafone store..make your device back to WM6..
say to the guy @ vodafone store that your going on a holiday.. they will give you a key that unlocks the device..
and your done ! ! ! Works for a friend of mine
Click to expand...
Click to collapse
I don't think, that a vodafone store will give me a unlock-code for a t-mobile device.... :O
And the next Problem is, that de MDA doesn't boot the OS and have the "no gsm" error....
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
shehzad143 said:
I have flashed my qtek s200 with ``RUU-Prophet-AKU2.2-2.20-2.47.21-Jester-r1 `` all goes perfect after update completes bootloader screen appears i tried soft reset as well as hardspl but nothing works than i tried ruu nvid rom but it also bring no result. I also tried prophet recovery but the phone is still at bootloader.I got an suggestion to hardspl the phone & than update but after hardspl by nvid software the phone do not show any detuction witk computer..
Plz help if any one can....
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353547
hy. i'm a newbie so plz escuze my mistakes and most of all my english.
i have a mda vario or htc wizard 200 as i know.
on the start screen,it shows
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.1
it's a G3 wizard. My problem is that it has the T-Mobile original german ROM and i want it in english. i have read most of the forums here and tried many ideas i found here but nothing helped me so far... i tried cid unlock with lokiwiz,it shows me that is unlocked but when i try to flahh it with the .exe flasher,downloaded Rom-s for it from here,it's not working. I have Win7 now and i tried with Windows mobile device center sync software for win7 and nothing,i tried in Win xp with activesync and nothing,the same simpthomes. It syncs,detects my ppc,i start the RUU,detects the Rom i have,but when i get to the flash window,just after it tells me that the flash process will take about 10 minutes,my ppc disconnects,enters in the bootloader mode,connection is lost and RUU ends with an error window that tells me that the memory could not be read.
My ppc is not sim locked,i can use whatever sim i want with it.
please help me,i am a desperate newbie. thanks.