Anyone know how to? I have my data connection listed, but the username and password are missing. I searched, but couldn't find anything. Can anyone point me in the right direction to find the info? Thanks!
Setting/personal/phone/services/internet -Update.
Sweet, thanks! This may be a dumb question, but is the username and password a general one? Or is it [email protected], still don't know what the password would be?
Cant find it now.
There was option on sprint website to change/reset your vision password and username.
Username and password should be blank.
..Use IOTA?
Hmm, so I'm just not real quick. If you force a connection it will connect with blank username and password. I still can't get the data button in com manager to work right, I'll play around a little.
Ok, with 3.0.4 I could hit the button in comm manager to start a data connection, now I can't. Any idea what would do that? If I establish a connection via another app the button shows connected and I can disconnect it.
did u run cab carrier ?
Yup ran the carrier cab right after flashing. Maybe I should just reflash it.
I just reflashed and it is the same way. So, I guess the question is: Can you toggle your Data on and off from the comm manager? I can only toggle off.
Related
I unlocked my 8525 and flashed to the ATT wm6 found here in the upgrade section. When i try to connect i can go to medianet home page no problem. when i try to go to anything else like comcast home page it has a white screen and thats it. Like there isnt any info to load. I tried yahoo and it took me to its mobile page. But any site that isnt a mobile page it wont load. Got any ideas ? Im gonna flash back to wm5 but this sucks . what am i doing wrong? Please help!
What connection you use?
Using WiFi shouldnt have any issue.
My guess is that your connections settings actually are Wap based - this is causing the problem.
In case able to have straight GPRS connection everything should be ok
Best
That makes alot of sence. Thanks. Could u point me toward the gprs settings and how to enter them? Thank u very much.
mcfadonna said:
I unlocked my 8525 and flashed to the ATT wm6 found here in the upgrade section. When i try to connect i can go to medianet home page no problem. when i try to go to anything else like comcast home page it has a white screen and thats it. Like there isnt any info to load. I tried yahoo and it took me to its mobile page. But any site that isnt a mobile page it wont load. Got any ideas ? Im gonna flash back to wm5 but this sucks . what am i doing wrong? Please help!
Click to expand...
Click to collapse
Here you go man...I hope this is what you are looking for.
I recently had to figure this out as well when I tried the TNT 2.0 ROM.
http://rapidshare.com/files/42598341/wpbear_Proxy_Folders.cab
Just install the CAB file to you phone and you should be good to go.
Hey thanks! Ill try it when i get back in town. Is that cab the gprs settings?
mcfadonna said:
Hey thanks! Ill try it when i get back in town. Is that cab the gprs settings?
Click to expand...
Click to collapse
Another issue is that most AT&T based ROMs have the proxy enabled by default. Run the disable proxy program (or edit the connection setting to not use the proxy) and see if that helps.
todd_jg said:
Another issue is that most AT&T based ROMs have the proxy enabled by default. Run the disable proxy program (or edit the connection setting to not use the proxy) and see if that helps.
Click to expand...
Click to collapse
I thought that was odd now that u mention it on the att web support section it says to enable the proxy . Anyhow ill give it a try when i get back to Colorado thursday. Thanks for the reply.
mcfadonna said:
I thought that was odd now that u mention it on the att web support section it says to enable the proxy . Anyhow ill give it a try when i get back to Colorado thursday. Thanks for the reply.
Click to expand...
Click to collapse
That's because AT&T wants you to access the Internet though MediaNET connection. If you are using MediaNET, you need proxy. If you access OpenDNS or just use some MyISP settings, you will want to disable proxy. It is a mismatch of connection and proxy that does it.
todd_jg said:
That's because AT&T wants you to access the Internet though MediaNET connection. If you are using MediaNET, you need proxy. If you access OpenDNS or just use some MyISP settings, you will want to disable proxy. It is a mismatch of connection and proxy that does it.
Click to expand...
Click to collapse
Thats what i thought. The settings for medianet , gprs , and open dns should be a sticky.
mcfadonna said:
Thats what i thought. The settings for medianet , gprs , and open dns should be a sticky.
Click to expand...
Click to collapse
Of course you could just run THIS LITTLE CAB FILE and have it set all the settings for AT&T for you!
(Not mine. WPBear posted a Cingular Settings CAB file a long time ago. This one came a bit later and was posted IN THIS THREAD
After pulling out a few hairs !
I finaly took the sim out of another att phone and the internet worked ! SO i got another one of my phones and put in the sim and it worked again ! Now knowing that all this time it was our fearless carrier That had things not right on their end. I called ( for the third time with one visit to the att store ) and got someone that knew what they were doing and it worked. PFFFFFFFFFFFF!
Such is life. Thanks guys for your help.
most all threads are on how to use a 6800 as a modem for a lap top.
I need to use it for a modem on my pc. I have tried the internet sharing thing and it didnt work (probably me). what im looking for is a blow by blow breakdown on how to use it here at the house.
My wife has a few courses she is taking on line and neither of us can get on to the web site but i can using my phone so i was trying to use it as a modem so she dosent have to go anywhere to do her class.
Tregrad said:
most all threads are on how to use a 6800 as a modem for a lap top.
I need to use it for a modem on my pc. I have tried the internet sharing thing and it didnt work (probably me). what im looking for is a blow by blow breakdown on how to use it here at the house.
My wife has a few courses she is taking on line and neither of us can get on to the web site but i can using my phone so i was trying to use it as a modem so she dosent have to go anywhere to do her class.
Click to expand...
Click to collapse
The ICS thing works great and is pretty easy. Launch ICS, plug USB cable in and hit connect on 6800. Look at status on 6800 and see if it says 'connected' or 'check usb cable'. If connected then enjoy, if 'check usb cable then look in device manager on PC and figure out why , then it should work good. Or get WMWifirouter and a WIFI card for your PC and do it wireless.
Tregrad said:
most all threads are on how to use a 6800 as a modem for a lap top.
I need to use it for a modem on my pc. I have tried the internet sharing thing and it didnt work (probably me). what im looking for is a blow by blow breakdown on how to use it here at the house.
My wife has a few courses she is taking on line and neither of us can get on to the web site but i can using my phone so i was trying to use it as a modem so she dosent have to go anywhere to do her class.
Click to expand...
Click to collapse
Laptop or PC.. it works the same.
1. Make sure you have a data plan with your carrier. (No data, no go)
2. Use Internet Sharing program on 6800 - (on sprint make sure Sprint PCS is selected at network connection). Click connect
3. Connect USB cable to 6800 and PC
4. Windows XP or Vista should detect and connect automatically
5. Bring up IE or Firefox to verify and surf away.
the process is the exact same whether on a laptop or desktop. they're both computers...
as long as you have a USB port and the right drivers for your OS, you're fine. works the same.
ok cool ill give it a shot and thanks for the input. I just had no idea if they were the same or not so thanks again.
got it to work but after a bit active sync comes up and ruins it. Im getting sick of active sync getting in the way all the time, it severely gets in the way of my regular connection and basically shuts down my connection untill I unplug my phone.
Anyway, back on topic, i keep getting this error "the romote party has endd this connection.
I have and unlimited data plan with sprint.
Search for app Kill Activesync.
now im getting an error code "67 registration code error your pcs vision username and or password may be incorrect"
then this pops up....."the romote party has end this connection.
activesync is not running
Tregrad said:
now im getting an error code "67 registration code error your pcs vision username and or password may be incorrect"
then this pops up....."the romote party has end this connection.
activesync is not running
Click to expand...
Click to collapse
are you on the 3.27 radio? What rom are you on? I know DCD deletes the necessary reg keys already, so i'm guessin you are on a 3.27 radio.
3.16 rom with the 3.27 radio
when i get this error
"your pcs vision username and or password may be incorrect"
where do i put my password and username in, in the phone?
Tregrad said:
when i get this error
"your pcs vision username and or password may be incorrect"
where do i put my password and username in, in the phone?
Click to expand...
Click to collapse
Are you running Internet Sharing (Use Spint PCS connection) BEFORE you plug in your USB cable? If not, Active sync will usually automatically run.
Do a SOFT reset and try it again.
the problem is with the radio. IT's crap for internet. Go back to 2.17 if Internet connection is important.
1999TL said:
the problem is with the radio. IT's crap for internet. Go back to 2.17 if Internet connection is important.
Click to expand...
Click to collapse
I'm running 3.16 and Internet no problem.
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
chris reilly said:
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
Click to expand...
Click to collapse
Try reading the AP4 thread!
chris reilly said:
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
thanks
Click to expand...
Click to collapse
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
I flashed the AP4 ROM on T-Mobile Ameo. There is no chance to start Wireless. There is only a WLAN-Ícon but no WIFI-Icon
but without this the AP4 Rom is very great...
Thomas
Try reading the AP4 thread!
Okay, i read it and i see to run off the automated screen orintation i need VO.exe from windows which i have found, but i cant paste it anywhere, i aint sure how to assign it to anything like launcher and i cant open it directly from windows
please help
as for the wireless problem, i will get on to checkin that
Pantaloonie said:
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
Click to expand...
Click to collapse
yes. U r right
and I made some pic
http://morries0811.spaces.live.com/blog/cns!9421367FF6994879!1173.entry
Hi Baby1111,
This ist not the solution for most of the Wifi-Problems i think. In my case the Symbol wich looks like WIFI ist named "Network Card". If I change to Internet instead of work nothing changes. WIFI does not turn on.
I saw the name of device in Bootloader ist ATHE400
Here my bootloader Information in the red bar:
ATHE400
IPL-v1.00
ATHE400 MFG
SPL-v3.50.OliNex
maybe this can be a problem, before i think ist was ATHE100. Also the TOMTOM 6 requests a new activation so somthing seems to be changed with the IMEI or so.
by reading the forum there if found 3 Cases for solution:
1. this one Change from Work to Internet ->> No scuccess in my situation
2. disable the automatic screen orientation ->> no complete Instruction how to do this or i can not understand it.
3. Sent the MAC-Adress of the device to Senior users like OLIPRO and get a file to change. ->> I dont know if they are glad to get much support requests.
I hope there will be a fix wich i can do by myself without disturbing the gurus at there great work.
Thomas
Thomas
@ Bit117 and Baby111
I can assist you if your WiFi did not properly configure during the flashing of AP4 instead of Olipro and cmonex (Olinex) who we'd like to have working on higher issues.
Send me a PM with your original MAC address and an e-mail address where I can send you a custom file configured to your device. I will also send detailed step-by-step instructions to fix your device. You will need to use MTTY so if you don't have that, find it in the wiki.
Regards,
Raskell
p.s. - If you do not know your original MAC address, check inside your battery door. On some models it is listed there (not the same as IMEI). Others have reported that flashing back to the modified AP3 gives a working Wifi. If this is so for you, get your MAC address from there and reflash to AP4, sending me the MAC info and we'll get you working!
Pantaloonie said:
Start, settings, connections, wifi, network adaptors tab.
Under 'My network card connects to' ensure it says 'The Internet' and not 'Work'.
Click to expand...
Click to collapse
Yes, this is obviously not a fix for those whose wifi will not turn on.
But I've come across a few people who think their wifi is not working because this setting is wrong, and when I installed AP4 it set it to 'Work' by default.
chris reilly said:
Hey
I have an Ameo; running AP4 and radio version 1.50
I can turn on wireless and it says wireless is available however thats it, i cant connect to anything nor use MSN or anything like that.
So i played around with it. I seen within some setting (network cards i think) that i had 2 wireless showing saying 'available' so i clicked connect and it said 'connecting' and then goes back to avilable and after a few attempts, unavilable.
My wifi is not secured, anyone can connect. Any help appreciated
Now as for the AP4 question when i turn my ameo around, the screen layout switches how can i turn the automated switch off ?
thanks
Click to expand...
Click to collapse
Hi
I had the same problem, But sorted with a Hard reset. After the hard reset it connects first time.
Good luck
Hey,
I tried multiple hard and soft resets; no luck. I have an open network now with full signal.
I have tried with no sim card, 3g sim card and an o2 sim card. No Luck
Please help.
As for screen auto orientation, sorted that
chris reilly said:
Hey,
I tried multiple hard and soft resets; no luck. I have an open network now with full signal.
I have tried with no sim card, 3g sim card and an o2 sim card. No Luck
Please help.
As for screen auto orientation, sorted that
Click to expand...
Click to collapse
I would re-flash the 1.50 or change to 1.57 radio, if I were you.
I’ve tried out all wireless with 1.57 radio in mine after having AP4,
all reception excellent. Very impressed particularly on the Bluetooth range.
where can i get 1.57 my mate?
thanks
chris reilly said:
where can i get 1.57 my mate?
thanks
Click to expand...
Click to collapse
I used the search feature and found it,
http://forum.xda-developers.com/showthread.php?t=372904&highlight=radio
wifi problem
i can not connect my network wireless. i have download the RUU_signed file.so how to change the radio with that file? sorry i don't know about it?
problem
i connected with by wireless but when i put an URL address in the Internet Explorer and an error appear "The adress is not valid.Check the address and try agian" how to fix it?
Is there a way to make Windows Mobile ask you whether it may start a data connection?
I don't want to deactivate it completely, its just that it goes online automatically as soon as I open any program that might require a network connection, which isn't what I want many times...
Hope anybody can help me!
cheers,
borg
Try "winmo longlife"
I beleive you can set it to ask for permission.
Thanks for your fast reply!
Unfortunately, "winmo longlife" doesn't run on my device.... is there no way to achieve the desired effect with standard windows mobile tools?
That would be awesome!
hmmm there might be another app that will do it but I'm afraid I don't know what it is.....
as far as I know there is no way to do it with the standard settings.
sorry.....
That's a pity....thanks for your help anyway!
I think I got it!
Go to Settings > Connections > Connections
Then choose "manage connections" (in my case under "ISP")
choose your connection, then edit, then press "next" two times until you have to enter a name, domain and password. Normally, I don't have to enter anything here, but when I just enter something under "name" it will ask me for a password evertime a program tries to go online....that way I can choose "OK" or "cancel" to allow or deny internet access (without having to entera password)....
cheers
datacontroller
try this
http://forum.xda-developers.com/showthread.php?t=643594&page=2
I've recently got myself a vpn account with a US vpn server. I can connect fine from my desktop always, and only when I'm on wifi from my SGS 2. I don't think it's software related, because I can connect on wifi, so in theory (I think) I should be able to do so over 3G. Am I right to suspect that T-Mobile blocks or does not support the service? Is there a work around for that? Not that it's terribly important, just wondering.
I currently run CM7 nightlies and never managed to get this to work, never had the chance to try it with stock rom.
Thanks
What error do you get when trying on 3G? I can't even connect over WiFi...
This is the error I get;
Server hung up, The username or password that you entered could be incorrect, Do you want to try again?
Username & password are ok. I know that cause it works when on wifi
.
anyone knows the reason?
Thanks
ioluas said:
This is the error I get;
Server hung up, The username or password that you entered could be incorrect, Do you want to try again?
Username & password are ok. I know that cause it works when on wifi
.
anyone knows the reason?
Thanks
Click to expand...
Click to collapse
Possible blocked ports on the Tmo network?