Blackberry Connect on Neon? - Touch Dual, MDA Touch Plus ROM Development

I am installing the latest version of blackberry connect on my US Neon but get a PIN0 error when I try to set up with blackberry connect desktop manager. I have read through the the blackberry connect forums and tried some hex editing of the Neon Rom but still getting same error. Anyone else working on this or have suggestions- Thx

First ... what OS Build you have and AKU?
try to edit the registry to AKU 1.0.0 or try 0.4.0 if you use a cocked rom from any body ... possible you cant get blackberry connect to work! then you must flash back to your original rom or try the telstra rom.

Tried all the roms cooked and original (US and Telstra)(CE 5.2.1941)- I have a Kaiser that I have blackberry connect working on and have tried changing the AKU to 0.4.2 on the NEON- Even before though with the Kaiser when I installed BBC, it would at least connect to the Desktop Manager, but with the NEON I get a PIN0 even when I try to do that. Is there a way to hack the Device Model to have it think it is a Kaiser and not a NEON?

You can HEX Edit the XIP, but i dont know dll you need to patch!

Related

installing windows 2003 on mda2

Hi, I'm trying to flash mda2 but it doesnt seem to work. Atm i got empty device when i turn it on i just have on screen USB 1.02. So can somebody explain me a way how to install windows 2003 english on that device? On that device before it was installed german version but now everything is gone. Device is from t-mobile.
Thanks.
And if is possible to tell me from where i could get files, because on ftp i downloaded qtekk 1.75 radio and ms nbf is fine but nk.rar is broken.

M600 PLEASE HELP! - Its the New Year and i need help

I have a M600 IPL 2.10.0001, SPL 2.10.0001 Current Rom 2.10.1.22WWE, Radio Ver 02.07.20 Protocol 413.1.03. I am trying to update my OS to WM6 using the roms i have found within this amazing site but with no joy, so far all i have been able to do is flash rome back to the original rom of device but without all the M600 spec (like the on screen orientation etc) but i have however been able to add these via cab files which i downloaded with the orange shipping rom but again i was unable to flash the rom also included via the usb update utility as i had done earlier - it seems like every time i try and flash a new rom using either the old or new way as followed exactly i get an error message on my pc and my m600 reverts back to bootloader mode (pretty 3 colour screen) Please please any ideas welcome
VISTA or XP ???
I think Vista have problems regarding RUU...
O/S
VISTA !!! - Thanks for info - any solutions would be much appreciated should one appear - cheers
UPDATE
Just to let you know i have even tried locating ruu file and running as admin as i have had suggested from one of our american friends and still no joy - i will save files to disk and load from another machine with xP for now but if any news breaks re vista please keep me posted - cheers
i had the same problem, so i installed a virtual machine of XP and it works fine

Am I just stupid?

Okay, didn't want to post, but wasted all day so far...
I started with a WIzard, then an Artemis, then an Elfin, then a Kaiser. I've managed to USPL them all and get 6.12 on them...
Got my Niki this morning, and I'm stumped.
I've run the SSPL, then tried the hard uspls by putting the nbh in the folder instead of the existing nbh - the bar goes to 100% almost instantly, so I'm guessing this is where I'm going wrong?
Tom - I've used your work on other devices before - but TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship.exe doesn't even see the device. I've also tried Neon_WM6_1_RV1 but that drops out at 1%, so as I said, I'm doing something wrong/stupid trying to get the SPL sorted...
hi,
the hspl flashed so fast for me also
also, v1 installer doesnt see the device, but flashing different roms all work...
First Start SSPL ... you will see the Bootloader with the Letter 1.16jump <- SSPL
now you flash USPL or HardSPL!
after that, go in bootloader again to check, is the spl flashed or not! if you see only 1.16.0000 it means ... it havent work! if you see 1.16hard or 1.15mfg all is right!
do you have a HTC Niki or a HTC Neon? if you want to flash a Niki SPL on a Neon ... this doesnt work!
OK.. I'm now at the stage where the bootloader is 1.16hard... so if I try to flash the neon it gives me invalid device, and the V1 installer doesn't work, so I guess I need to hunt for another ROM? Recommendations?
did you try extracting the rom .exe and running the customruu
TangerineTractor said:
OK.. I'm now at the stage where the bootloader is 1.16hard... so if I try to flash the neon it gives me invalid device, and the V1 installer doesn't work, so I guess I need to hunt for another ROM? Recommendations?
Click to expand...
Click to collapse
what rom you use? a edit rom publish from me? possible i have make a error in the CID?
Sorted now, thanks for all your assistance...
Got Mary 0.33 running no problems.
Now all I have to do is get the thing recognised in Vista! MDC installed, but doesn't see it. Device drivers installed ok... any clues?
try a different cable
kerrance76 said:
try a different cable
Click to expand...
Click to collapse
Tried three dirrerent ones already. Damned Vista... XP is a doddle...
its a funny thing, i use 3 vista machines daily and have never had a problem but some others just cant get it to connect
Sorted too... connected up and waited a while, then deleted HTC drivers and mobile device from device manager... unplugged, rebooted, reconnected and waited to reinstall drivers (all in non-enhanced usb mode)
Now all I need to do is get a "reverse bluetooth PAN" so I can use my home broadband connection around the house (I get no mobile signal)

Probs while upgrade to WM6

Hello everybody...
I just bought an PM200 (German T-Mobile Edition), WM5 says its a PM200.
After that I installed the aku 3.3 and everything worked fine...
Then I tried to install the "Charmer_Touch_GER_Ridingshark_Beta_3.2".
But while Writing the new TouchFLOW OS ROM i got the error... "Could not update itsutils.dll to the current version, maybe it is in use?
try restarting your device, or restart activesync
But i realized it to late and already made a Hard Reset...
Then the Touch-Flow UI tried to install and the i got the WM error:
"The file : \windows\XDADev_BatFix.exe does not exist".
But i cant go on with the install but it doesnt matter which button i push...no one responds...
Then i downloaded the XDADEV_Batfix.cab but that dowsnt work...sure because it isnt the exe file...
Can anybody help me with tha prob?
I also treid to install the WM6 update again but i always get the itsutils.dll error...
Geetings to all
Markus
Here is how to do it:
Flash back to WM5 using bootloader. Press camera button during reset.
If you see the screen with the 3 colours plug in the USB cable and wait till the Device is installed. Now run the T-Mobile uptade (Best is to use Akku3.3).
After it is finished connect to active sync and go to the Folder were the WM 6 upgrade is in. Now install the two cabs out of the folder where the WM6 ROM is in, on your device and make a soft reset. After that run the upgrade File. It will go same as before, but there will be no error and it will update completly.
Have a nice time with WM6
ChrBeck
Can i writ you a pm, it will be much better for me to write you in german...
In der PM in Deutsch geantwortet.
Answered in German in a PM.
Ok, the prob is solved.
I just want to write it down here, if anybody has the same prob...
Thanks again to ChrBeck, I also used the search in this Forum to get it solved but i could find anything useful.
The only thing I had to do was to install the to cabĀ“s (Cert_SPCS.cab and EnableRapi.cab witch are already included in the Charmer_Touch_GER_Ridingshark_Beta_3.2.rar.
The first Step was to update the WM5 Version to the aku 3.3. Then I transmitted the 2 Files with activeSync and installed them on the Charmer just with thip on each File. And the last Step was to flash the new WM6...
DONE....
Its so easy if you know what to do and with help from some users...
Greetings MArkus
This is the thing I have written before. But it is not easy to understand, if you don't know much about it.
@all: And now much fun with WM.
Have a nice day
ChrBeck

Problem upgrading WM5 to WM6

I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error) i tried with WWE_020108_B2_DS Rom but the same happend. The the support agent told me that i need to do it with the boot-loader mode (rec + soft reset) i enter to the boot loader options are
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
i plug the USB cable and USB detected come up but in the PC the same error happend (costumer or id model error)
So hwhat can i do
cyberkoolmx said:
I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error)
Click to expand...
Click to collapse
Hi
I have the same problem with my XDA Atom Life Arabic Rom I can't upgrade to WM6 so I think use other option like ROM unofficial
Hi
Today I upgrade my PPC to Medkid's ROM 19214 and is amazing
edited the pass.32 file - worked
I just bought an O2 XDA Atom Life on craigslist. It still had the Windows Mobile 5.0. So the first thing I wanted to do was to upgrade to the latest ROM. I tried the ROM's on MWG.com and on MyXDA.com. Everytime I had the same problem. I had the 20070326B1ARA Windows 5.0 Arabic version. None of the ROM's would work.
I got the Arabic Windows 6.0 ROM on myxda.com and started the install. Once it extracted the files, I opened my Windows/Temp folder on my computer. Using a hex editor I opened pass.32. near the beginning it had the letters WWE. I changed those letters to ARA and saved the file back into Windows/Temp. Then I continued the installation and everything worked.
UPDATE: This also worked with the latest ROM from the MWg website. I don't know if there is much difference except that the MyXDA version includes a program called O2 Connect for updates... which doesn't find any updates.

Categories

Resources