I'm currently running DCD Titan ROM 3.2.0 with radio 3.42.02
I have run into two issues that I cannot seem to find an answer for.
1) when I soft boot the phone it will go into a searching mode for 20 mins before it will find the verizon network
2) the mail client can received email but will not send email I have triple checked all the imap settings and it will fail no matter what stmp server I use
If you put in stmp.x.com Id expect it not to work (SMTP)
check that first.
lol it is smtp
^^^ can you serf the net, send receive MMS?? How did you flash the radio?
Related
hello guys.I have a minor problem with all the WM6 Roms.I use the settings i used with WM5,but i can't recieve any mms... I have no problem sending... It seems that my phone can't recieve the mms "alert" from the network carrier,and download the message.I tried to sync manually(using send/recieve) but i get a sync error.... I am currently using PDAViet 4.0.0.0.3a.... Any ideas or solutions,will be very-very helpfull....
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile.
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile. My advice: Search for a .cab.
jellyme said:
Send/receive has nothing to do with MMS/SMS, unless you've got some strange settings set that queues the MMSs until you press that Send/recieve. Even with my fully working MMS under WM6 I get a Sync error if I press it.
Just manually configure everything (again) and it should work. Didn't work for me, however, until I found a few provider MMS .cab files. I ran two of them and I could suddenly recieve MMSs. I am using trueneytrals WM60 and T-Mobile. My advice: Search for a .cab.
Click to expand...
Click to collapse
After numerous attempts to get MMS working under the xda and tnt wm6 roms, I had to revert to an official wm5 rom to get it working.
As upto now I haven't a clue of the cause of this.
The only one I could come up with is the fact that the wm6 roms contain mms composer 3.5 instead of 3.0 (arcsoft)
When I upgrade to Pdaviet 4.0.0.0.3a, after I manually configured the MMS settings, I also thought that there was a problem with that rom. I could receive but not send, always hang in 97%.
A few days ago I updated to the new rom, 4.0.0.0.5, and it was even worst. But after I reviewed the settings, now I have no problem in receiving or sending MMSs. My fault on this one.
onesolo said:
When I upgrade to Pdaviet 4.0.0.0.3a, after I manually configured the MMS settings, I also thought that there was a problem with that rom. I could receive but not send, always hang in 97%.
A few days ago I updated to the new rom, 4.0.0.0.5, and it was even worst. But after I reviewed the settings, now I have no problem in receiving or sending MMSs. My fault on this one.
Click to expand...
Click to collapse
How did you solve your problem?
I'm on 4.0.0.0.5 and I can't send or receive MMS on TMN and I'm pretty sure everything is well configured.
TIA
Edit:
I sorted it out, just created manualy the connection with the right settings...
I just got my 8525 last week and I am totally new, but I took a chance and downloaded the VP3G Official AT&T Rom. I think it works great. The only issue I have found is when I try to send an e-mail thru Xpress Mail, I get "You are currently roaming. Synchronizing may result in additional charges." I reloaded the Mobile 5 rom from the HTC site and didn't have this message. Is it anything I should be concerned about? I guess I will find out on 8/9 when I start a new billing cycle.
Thanks
There is a new beta floating around somewhere that is made for WM6, or you can do this:
SOLUTION: How to disable the Xpress Mail Warning about Roaming
To those of you who are experiencing the annoying warning message about Roaming Charges when manually trying to retrieve Xpress Mail, here is the solution:
Add this to your registry:
Code:
Key: HKCU\Software\Microsoft\Inbox\Settings\ShowRoamWarning
Value: DWORD:0
Thanks for the help. Unfortunately, that key was not in my registry. I temporarily solved the problem by removing Xpress mail and going back to the old way. It is slower, but at least it works.
Thanks again.
Just add a new key. I didn't have it either, wasn't sure about the space in the word "War ning" so I added 2 keys, 1 with and 1 without the space.
Works like a charm for the roaming error message, but I have disabled my GPRS so now I get an Inteernet connection error message
Anyone know the key for disabling the internet connection error, or better yet, to stop messaging from going to GPRS for an internet connection?
Cheers
Do a search for NOGPRS.
Flashed to latest official ROM
1. The voicemail line if gone from the today screen, and I can't find any way to get it back
2. The ForceOffSSL registry trick to get comcast email to not take forever no longer works, and breaks email completely
3. Using a hacked HTC hone dll to get weather for a custom city locks the phone up completely. How do you get custom weather?
Also, anyone have a link to the previous ROM, the last WM6 one before the 6.1 update? If I can't get these issues fixed, I want to flash back
I would try to uninstall the HTC Home can and re-install it. As for the Office workaround, I would call Comcast and ask for the exact exchange settings and let them know that you are trying to access your E-mail through your PDA phone. Sad to say you will probably just get some idiot reading out of a book so good luck with that one. You may need to tell them that you ahve a "tier 2" problem. ou may have already tries this stuff but it's a good place to start.
emkorial said:
3. Using a hacked HTC hone dll to get weather for a custom city locks the phone up completely. How do you get custom weather?
Click to expand...
Click to collapse
You use HTC Home Customizer to add a custom city for weather... not a hacked DLL...
I entered in my city using HHC, and it doesn't work.
I'm using the same comcast settings that worked with WM 6.0
What about the voicemail indicator?
You need Voicemail Today plugin. Here.
Got the cab installed, Voicemail is back
I explicitly declare dthe ports for my incoming and outgoing COmcast mail servers, and now the regfix works, so that problem is fixed.
Only issue left is weather. It doesn't work. I have the latest veriosn of HHC, I went into the weather page, switch it to a custom database, put my city, state, country, and zip code information, and it doesn't work. "Unable to retrieve data for selected city"
How do you get weather on WM6.1? I tried the hacked DLL method, but that bricks the phone.
I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.
Have the same problem but can download picture not audio files
jbogstartrek said:
I have read and read and browsed and downloaded and typed and entered and so on!!!!! But none of the solutions or cabs seems to work for Erofich's Standard 6.1 1.1.7 version. I am on the Cingular/AT&T network. Does anyone have the fix? I can send MMS but cannot download.
Click to expand...
Click to collapse
i have the settings if you want them. the cab files wouldnt work for me either. just pm me or just ask in the forum.
settings
they are also on the att website.
Yes, the settings on the ATT website WORK, but not completely. The MMS header will download, but you can't view any pictures. This must be a ROM issue - I've tried everything I can think of!
Finally resolved
This is one of those occasions where you are not sure what fixed it in the array of changes, but it worked, so don't argue with results.
I went in and cleared out all the settings that came by default with the 6.1 ROM. (Proxy, GPRS, MMS, etc.)
I then input by hand the settings on the AT&T website at:
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=84238
Thank you Firewulf for the kind offer. I am curious to see what your settings are though.
I get alerts, I am able to send and receive all MMS messages as well as txt msg and Exchange Outlook email. No ERROR SYNCHRONIZING anymore!
Strange... my internet works (as well as all my internet enabled apps), texting works fine, but MMS is still a no-go! I don't get "error synchronizing" anymore... it just tries to send and always fails 5 minutes later! I have checked and re-checked the settings - I am running the latest WM 6.1 Standard ROM from this forum.
Is it just me or is anyone experiencing a "Forbidden" error when sending/receiving MMS after updating to AT&T's new ROM with 1.14.25.35 Radio?
I've reflashed the updated AT&T ROM and then flashed NRG's latest 6.5 ROM with the correct Rilphone.dll and still have the Error. I even tried sending from the new stock ROM and got the error. I did this multiple times to make sure it wasn't a bad flash and still have the "Forbidden" error. Did I do something wrong when I flashed the new ROM and Radio? The settings in MMS are correct and I didn't load anything else prior to testing MMS.
At first I thought it was AT&T and wasted over 30 minutes with a rep that knew next to nothing. Then it dawned on me that this all started after I updated to the new ROM/Radio release for AT&T on HTC's website. So, I reverted back to the original shipped ROM with 1.02.25.32 Radio, flashed NRG's latest 6.5 ROM and can now send/receive MMS.
I had the same forbidden error and had to talk to tech support from att.. apparently it's because i had placed my sim into an iphone and we all know iphones can't send mms so it registered into their system that i was using an iphone thereby causing the iphones imei to register to my number hence why it's forbidden to send/receive a mms. did you perhaps do something similar?
ATT0001 file can't open it
Hey Guys... sorry than I can't help to solve your problem.. But i have a problem too with the MMS... what happens is that every time I send or receive a mms to a windows mobile phone comes as ATT0001 file and I can not open .. I need help with this thanks
Loner2DEnd: I did but only to unlock one. I've done this before and have never had that problem up. I only noticed that I wasn't able to send/receive MMS after I had the official update from HTC for the FUZE. I was on the phone with the tech and they told me that using my SIM in an iPhone wouldn't have updated my account. You can log onto your online account with AT&T and see what phone/IMEI is registered with your account. Mine still has my FUZE and correct IMEI. Everything is working now that I reflashed the original shipped ROM with the 1.02.25.32 Radio.
I downloaded another copy of the ROM update from HTC for the FUZE and ran the same tests to see if maybe it was a corrupted file/bad flash and I still had the same issues with MMS. My internet still worked but I got the same Forbidden Error. For now, I'm going to just stay with my current (original shipped) Radio since everything's working.
Dannyedilber: I'm not familiar with that Error. Sorry man. I don't know much about MMS and had to do some homework and some trial and error to finally find this solution. Maybe one of the seniors can answer your question.
I've had this problem a few times but usually fixes itself after a reset or a quick disconnect/reconnect of the radio.
I find that if I leave my data on for an extended period of time, it seems to happen. Almost like AT&T is seeing the high traffic and cutting me off.
Also check to make sure you guys don't have Data disabled in your accounts.
@Dannyedilber: I don't even know what an "ATT0001" file is?
@Loner2DEnd: My wife just returned her iPhone because she said it sucks compared to Windows Mobile (smart girl eh?) and went back to her old Samsung Blackjack. We did this yesterday, after her having the iPhone for a little under 30 days. I just sent her a picture and she got it.
From AT&T
The data network works for all of our devices and the Windows Mobile devices are the only ones that seem to have had some issues with the way the data network is configured. Rather than trying to re-configure and potentially break the network for other users, we have been working on a fix for the Windows Mobile issue. We have a fix that will be implemented by the end of this quarter and we should have the problem resolved at that time.
Click to expand...
Click to collapse
From AT&T
Just wanted to let you know that I did get an update. The project to "fix" the 403 error is moving forward. Right now we plan to have the implementation complete in June with Project closure in Early July. I will follow up again in about a month to see the status and provide closure information.
Just for clarification: This project hasn't slipped a month, we keep the project open during a "soak" period to ensure that everything is going as expected. Also, as we apply the fix to the elements in the network the fix will be applied to certain markets and complaints should drop for that market dramatically. I haven't seen this issue in a while here so I believe that the patch has been applied for the Minneapolis market.
Click to expand...
Click to collapse
An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
so its by market then?
I flashed the new rom about last week, had no issues receiving and sending MMS on it and on NATF's 4.7 rom.
Still No MMS
nmbr6 said:
...An easy temporary fix is to put your phone into flight mode and then take it out. A new data connection almost always works. Worst case scenario soft reset the phone.
Click to expand...
Click to collapse
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Black C5 said:
My MMS is not working incoming or outgoing. I have tried it from TF3D2, Titanium, after reset, after airplane mode and reset with no success. I put my SIM card in my backup phone and MMS send and receive worked flawlessly. I do not get the forbidden error message some of you have gotten; it just does not work. I have reset the RegEdit keys several times and they are currently set at 1.2mb. I know that 6oo K is at&t max, but the two test MMS messages are 77K and 317k. Thanks - David.
Click to expand...
Click to collapse
It sounds like you have a different issue altogether. My posts were answers from AT&T strictly for the 403 forbidden issue.
Player911 sorry that I was not very specific...whats happening is when I send a ATT MMS to someone who have a HTC touch pro to her hotmail account.. she can't open it because the picture come as ATT0001.. even when I send att MMS to myself at my email account I receive as a ATT0001
Need help with this guys.. please
Sorry my english
Hi All:
First off thank you for the info in resolving this issue. Since swithing back to the original shipped ROM with radio 1.02.25.32 then flashing EnergyROM 3.0 Phoenix 6/12, I've had no problems with MMS Forbidden Error. It's been a week now and I've had no data/network issues either. I'll try again with the new Radio/ROM this weekend when I have some free time and will report back. Thanks everyone!
Tru using a registry editor and go in and change the registry in Arcsoft under HKLM>Software>Arcsoft>Arcsoft MMS UA>Config>MM1>MMSCSetting>SampleMMSC>Wap1SendDefault and Wap2SendDefault and change to a desired number. For instance, I have 102400 set to send up to 1MB.
See if that allows you to send.
try enabling ATT's proxy. This always works for me.
1. Enable the proxy
2. Kill the data connection
3. Reconnect data
4. Try sending or receiving.
This has worked countless times for me.