Please help... my prophet is dead..
http://forum.xda-developers.com/showpost.php?p=2426917&postcount=79
PS: Sorry for the double post..
suggestions
press the soft-reset & camera button for few seconds & release..
as long as you can enter the bootloader, it can be flash again.
Hi,
Thanks for the reply. I have tried the method that you provided... but it's not working
Related
Dear Pro!
please help me! My XDAII uprom finish ! it alway Hardreset .I uprom again It error and now bootloader not run anymore .i'don't know why .Please help me!
Thanks !
ok, don't lose it just yet.
first thing to try is the "vulcan death grip" on the pda; simultaneously press the power button, soft-reset button, and middle button on the scroller on the front of the PDA to enter bootloader mode, if you do it right, then the version number will appear at the bottom of the screen (i.e v1.06) and you will thus be in bootloader mode.
failing that, remove the battery from the PDA, and leave it like that for about an hour so the backup battery can die, then put the battery back in and pray it enters bootloader mode.
After some problems with latest rom from gullum Prophet Touch Xb(system reboot and white screen after reboot) i´ve tried to flash pda viet step one rom.But my phone don't turn on.i´ve tried the charger trick but I can´t get the bootloader mode,but when I remove the plug from the main charger or the battery the screen blinks.
Anyone can help me?
Thanks
remove your battery,sim and storage card.plug battery again,turn on.if it do not work,u can use reset button
biokiller said:
remove your battery,sim and storage card.plug battery again,turn on.if it do not work,u can use reset button
Click to expand...
Click to collapse
Hi thanks for your reply.
I have tried all buttons combinations but they don't work.
try a hard reset?
1. hold the camera and connection button on the side
2. do a reset (pen in hole with buttons still held)
3. wait five seconds then press green phone button
this fixed mine
Hi,
Does red led blink when you plug in the charger?
igord said:
Hi,
Does red led blink when you plug in the charger?
Click to expand...
Click to collapse
Hi,
I got the red blink when I plugged mine, whats mean that?
Mine is stucked in the three color screen, I cant do anything.
HAWF said:
Hi,
I got the red blink when I plugged mine, whats mean that?
Mine is stucked in the three color screen, I cant do anything.
Click to expand...
Click to collapse
1. I do hope that your battery is not flat.....
2. FORCE your prophet to bootloader (3 colors) mode MANUALLY, not stuck 3 color,
3. when it turns into 3 color, plug your prophet to PC, you SHOULD SEE that " USB " at the left bottom of your prophet,
4. flash PVtemp,
5. your device will end up with WM5 wwe , then flash WM6........ go to my thread man~~~~ in
my signature....
hi bad news today while i'm flashing the prophet he stucks on boot loader
then the prophet dont start's, sometimes it starts it stuck in boot loader and then is deaed again what's up guys help me please
G40 said:
hi bad news today while i'm flashing the prophet he stucks on boot loader
then the prophet dont start's, sometimes it starts it stuck in boot loader and then is deaed again what's up guys help me please
Click to expand...
Click to collapse
Hey~~ sound like bad battery ~~~~~
low battery ...thanks
G40 said:
low battery ...thanks
Click to expand...
Click to collapse
hi to all member & thanks for read my post
plz any one tell me i have e ten m600 i cant flash it isnt showing rebot
i have try to for mat it lot of time but i cant plz
any one tell me how to flash & how to do the job my e mail is
[email protected]
Hi,
I tried to update My Prophet to crystal V5.1 and now i have BLUE,RED,GREEN screen always, i tried hard reset etc...
But nothing works
I try a lot of roms and this is the first time i have this problem.
Please Help!!!!
Herc.
did you try to connect USB to the computer at the bottom left will have a word USB then try to upgrade again ^^
hey hey hey~~~~ did you read my solution post?????
hercule18 said:
Hi,
I tried to update My Prophet to crystal V5.1 and now i have BLUE,RED,GREEN screen always, i tried hard reset etc...
But nothing works
I try a lot of roms and this is the first time i have this problem.
Please Help!!!!
Herc.
Click to expand...
Click to collapse
Wanna save you prophet?
1. go to bootloader mode (keep pressing the comm.mgr button same time pick the softreset button with the stylus for half second, then only release the stylus until your see the tri-color screen. then plug to a restarted PC,
2. flash the PVTemp for step 1,
3. flash HARDSPL for step 2,
4. follow the way here below
http://forum.xda-developers.com/showthread.php?t=353547
please do!!!
PLEASE help
I've flashed my Prophet to ROM Diamond..........
Everything was fine, instalation without any problem...
But when it was done, I've made a hard reset and than it just loads bootloader and nothing alse, when I tryed to flash-back the WM5 it writes that I haven't connected PDA to PC.
PLSSSSSSSSSSSSSSSSSS
Help !
connect USB lead press and hold camera button / press reset button still holing cam button a three colour boot screen should appear now you can re flash your ROM using the normal method
thanks
thank's for reply, I've tryed this but nothing happend, but the "NVID_RUU" has solved that. ;-) THXXX
where ?
and just onw more question.. where can I down the "HARD SPL" ? I've looked around but havent foud any...
I think this tool does the spl for you
Info
http://forum.xda-developers.com/showpost.php?p=2317108&postcount=1
Download here:
http://rs636.rapidshare.com/files/209950732/Prophet_Tools_2.8.3.zip
thX
thank's now its fully working and running on wm6.1
hello,
My S200, suddenly, starts cam. I closed it.... started again...closed it...
Decide so softreset.
From now on, only the 3 coloured bars!
Already tried softreset again, remove battery..... nothing!
Please, what to do!
Thanks in advance. Sorry the bad english
Sigla
try hard format or install a new rom
bikertibi said:
try hard format or install a new rom
Click to expand...
Click to collapse
it worked? for the hard format hold camera and connection button (on the left of the device) keep pressed and then hit the soft reset button at the bottom of the device. keep the 2 side buttons pressed until a message pops up asking if you want to hard reset. press green call button to accept.