i use mtty to check my bricked hermes's CID. but it show some strange code.
what is my phone's CID anyway and can i make it SUPERCID by any flashing?
(my phone was bricked, SPL2.03, NOGSM , no boot OS and no KITL)
please help me , thank you
Related
Is there a way to find out your CID on a bricked Hermes?
How do we amtch CIDs with providers?
"info 2" or "info 4" bootloader commands, depending on how bricked it is.
You can extract a rom from your provider and see which CID it has... or just ask for example "what is the cid for spanish vodafone 1605?" and someone will reply "VODAP304".
pof said:
"info 2" or "info 4" bootloader commands, depending on how bricked it is.
You can extract a rom from your provider and see which CID it has... or just ask for example "what is the cid for spanish vodafone 1605?" and someone will reply "VODAP304".
Click to expand...
Click to collapse
Form mtty I guess. If I run these, I get gibberish. I know that my rom doesn't match CID of the unit for sure..
Thanks for the input, appreciated.
Unplugged and started again, and was able to get readable info... strange. Thanks anyhow.
Odd... when I provide a ROM using the bootloader and ROM on the transflash card, it check it, then says not allow. When I use a ROM that is from the proper CID, it goes right away to the tri-color mode without flashing. Anyone seen that? Why couldn't I re-program ?
Any insight would be appreciated.
1) Read this: http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
2) if you are not able to figure out yourself with 1, then post here, and include your bootloader version, etc... so we know more about the problem.
http://forum.xda-developers.com/showthread.php?t=286755
Hi Pof,
According to the chart, I would need to send it in... No KITL and No GSM.
I have SPL 1.09, IPL 1.01. Radio 1.40. It was running the WM6 rom, and tried downgrading to provider's WM5 rom. The CId is QTEK_001. I can run hard reset, I can get into bootloader. Unit responds to mtty.
When trying to apply the ROM <RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108>, it reads the file... checks it like stated, but then give me a not allow. :-S
Not sure if this has any meaning, but the not allow windws says at the top, quickly, 00028002.
Dear Friends,
Help needed!
I had G4 device and wanted to upgrade to WM6. I followed the steps
1-Downloaded Unlockwizard and run it as instructed.
2-Downloaded SPL/IPL 3.08 and upgraded.
3-System rebooted as normal.
4-Flashed latest WM6 ROM from (PDAVIET).
5-System hanged and then NO POWER, NO BOOTLOADER MODE.
Please help if it can be recovered.
Question ... you have use Unlockwizard? Have you SIM unlock or CID too?
Have you realy reboot after IPL/SPL 3.08 update?
I used lokowiz02b to unlock the device.
First did CID unlocking and then Unlocking, both went well.
I rebooted after IPL/SPL 3.08 and booted normal.
Are you sure it is a G4?
If so, congratulation that you have bricked your device, and you can't recover it by any easy way (In fact, the only way is to use JTAG connector, however only a few people is successful).
Blame yourself by not reading the stickies carefully.
this is why i ask the question ... unlock G4 realy??
you cant CID unlock a G4! only g3 is possible with lockwiz.
So i have a Swisscom branded HERM200 ROM-Version:1.20.166.4 with German language.
Is there any way to flash in English language? thx
Yes there is but before flashing i recromend that u SIM unlock ur phone and CID unlock it (use the search or WIKI on how to do that) and then upload ur TyTN with the latist HardSPL (RECROMENDED) if you dont you run a masive risk of bricking ur TyTN!!
Doing this will Void Ur Warenty (if u have one)
thx but this phone is already sim unlocked i like to do like here says :♦ http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=69&Itemid=26
is this tutorial OK?
thx
yes it is, but before you do that, do this first
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
ERROR UPDATE [260]
Hard-SPL-V7 using this file trying update my HERM200
any help now please?
error 260 is an open port error, try any of the following:
reset your phone
reset you pc
change usb ports
turn off firewalls or antivirus software
i use mtty to check my bricked hermes's CID but it show some strange code.
do you know my phone's CID anyway and can i make it SUPERCID by any flashing?
(my hermes was bricked now with SPL2.03, no gsm ,no boot OS and no KITL)
please help , thanks
i tried to flash imatejasjam radio with hermessim cid unlocker v3a
but the radio doesnt flash it take o% then doesnt proceed
and give errors now handset stuck at bootloader mode.
bootloader is 1.40
any suggestions mates. i want to recover my handset.
any help will be apprecaited
regards
unlock trigger
try this mate
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick