I'm a real noob at all this as I have only had my Dopod 838 Pro for about 2 months. I want to upgrade to WM6.1 but first I'm trying to install HardSPL just in case something goes wrong.
When I run RUUWrapper.exe everything goes OK until the programs starts trying to connect to my phone. It just times out and gives me an error 260 message. The phone is connected fine and it syncs perfectly. I'm running windows vista ultimate and have the latest WMDC installed.
Never mind. For some reason it has fixed itself and has now flashed fine. Sorry everyone. I look forward to hanging around here more often.
Try the Sd card method, NO sync problems or accidents waiting to happen... I don't use the pc to flash anymore, EVER...
Cheers...
Related
I have a AT&T 8525. I installed 2.10 Olipro and then flashed with the latest AT&T WM6 upgrade from this site. It was labelled as the "official" upgrade.
The upgrade went well and everything seems ok (though it feels a bit more sluggish and I thought it would noticiabley increase speed of apps etc.)...anyway my Activesync is simply not working with this phone anymore. It doesn't recognize it when I plug in with the cable. This makes it hard for me to re-install a different ROM or any other app.
Bluetooth can see the phone, but, again, it doesn't seem to want to make an Activesync connection....please help...thanks in advance.
try deleting existing relationships. and create a new one. most likely because of your current upgrade, your DEVICE ID has been changed.
I actually have no relationships in Activesync right now.
I'm loading a fresh copy of Activesyn on my wife's computer to see if I can get a relationship established on a new install.
Any other ideas...I'm all ears!
you should be creating one.. its most likely because your DEVICE ID has been changed. have you checked it?
I have the same problem
The problem apears when I connect the device to the computer "USB Device Not Recognized".
Tested in another computer with same results...
It seems to be some driver issue, but I have no clue where to start...
I have a HERM200 (TyTN) unlocked and activesyn was working when the device OS was WM5. fter the upgrade, does not recognize anymore...
It's working now
After the OS upgrade, needs to turn off (for real) and turn on again. It works sweet.
Need to remember: MS Windows DEvices needs MS Solutions - Reboot !
I am upgrading here:
http://forum.xda-developers.com/showthread.php?t=352221
Iam using Vista x32 Ultimate which has a built in Active Sync.
I dumped the content of that rar into C:\Windows\Temp and proceed to update when i plugged in my phone.
Then i wait and then it goes "Target Not found" and window crashes
Now my phone is stuck in a black mode that says:
Update Utility
USB Connected
And when i try to rerun the Device Utility Update it says: Error: CONNECTION ERROR
What do i do now?
HELP??????? Who can i contact? I have got a window xp computer now
Set it to Tricolor screen, and ran the original factory shipped ROM hope it can override the bad ROM image. It worked with Prophet and Kaiser.
I have not played with my AtomExec for so long, so I am really rusty with it now. Borrow or use a machine with Windows XP and installed ActiveSync and see if you can do it with that.
It is going to be a lot of work but it is better than a dead AtomExec.
Because very few people actually bought AtomExec so the general help is not that much around. I just received an Email from O2 that the company is taken over by another group.
I just update my AtomExec to WM6, still testing it.
Hey there,
So i have a problem with my new qtek 8500, i want to flash it to wm6.1, so i made normaly the cid unlock, the application unlocker. So to my problem, when i start into spl, then comes the screen with the 3 coloured lines, and then is my connection on the pc away, it is then not connected, and vista installed new drivers for the device, that dont works, so what can i do?
thank you for the answers
René
Hi,
You should flash it from Win XP since flashing from Vista is not (yet?) supported.
Cyrebre
i am having the same issue.. i had done CDi from vista via bluetooth.. after that no matter what i do the phone is not willing to get connected viz activesync.. i tryed in 2 differend systems.. same.. not working with bluetooth nor usb..i is charging but no connection... i have another cingular 3125 as backup as well that seems to be working fine..
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Don't worie.
I had somewhat the same issue with a bad ROM flash.
Just disconnect the USB and boot to the bootloader screen (the tricolour screen) and you should be able to reflash the phone again.
Problem in syncing the mobile
I am not able to sync the mobile to the laptop.I have installed Microsoft Active sync 4.5. Even then it is not syncing.So how could I run the hermes upgrade if the mobile is not helping.
Please help
In Activesync on PC - Untick "Allow USB Connections".
Put the Hermes into bootloader (tri-colour screen) and connect by usb. Run the RUU_Wrapper.exe file you want. Follow onscreen instructions.
You need to have installed Hard SPL V7 for this to work...
did not work
Hello Boss
I tried to follow the procedure you suggested me. but it did not work. I tried with Hard SPl 7.0.
Please give me some suggestion
you dont need an active sync connection to flash it. Enter bootloader(tri colour screen) as you were told in the previous posts and Just click on the boxes that you do have a connection(even though you dont) and then flash the rom.
@ultramag69 i hve never had to untick allow usb connections and i have cocked up loads of rom flashes, saying that i have never had a problem flashing in vista either so maybe i am lucky
If you still cant flash doing it this way, then maybe you should try flashing from sd card instead, just make sure the battery is fully charged. Full instructions of how to do this are found in the hermes wiki, which i advise you to read anyway.
Oh and good luck anyway, you should be able to recover the phone from this ,so i wouldnt fret too much
Guess he isnt hardspl'ed... then his batt is death... must to flash a shipped rom.
correct me if im wrong.
Problem with upgrade At&T 8525 mobile
Hi!
I'm having problems with my Cingular 8525, after I made the upgrade to WM6.1 (FARIA-R32-XDA2_WM6.1.rar) for WM 6.5 (FCWs_stock_like_6.5_v3.rar), and slowed my device does not work anymore. He died.
I need help please. How resurrect it?
Excuse my English.
english is not the problem here cause we need more info... device info SPL IPL hardSPL? you go from 6.5 to 6.1?
Do you try to flash first the Stripped?
Does your batt has charge enough to boot?
There are many many things to say so... start to tell us all your history!
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
check the wiki pages for your device in the upper bar of this web forums
there are many official roms.
I also am currently using an 8525 (Herm100). It was received from an Ebay deal with WM5. I flashed it with the ATT OEM WM6pro (aka shipped wm6). Once it hit the three color boot screen, it sat on that for a couple of minutes then started cooking. Once it showed a progress bar, it took about 3 minutes to cook the WM6 over the WM5. It also showed a popup that stated going back to WM5 was not an option.
I would suggest running the installer again and going down to 7-11 for a refreshment. You may not have let it percolate long enough to set itself up for the actual ROM overwriting.
gorkalraghavendra said:
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Click to expand...
Click to collapse
Hi Guys^^
I'm quite new to all this flashing stuff and spent the last week trying to figure this out but it seems I'm missing something.
I've got a O2 xda star (niki300) phone with a 1.58.16.27 radio (i think) and spl 1.16. I wanted to install a new rom and choose the Salvy.C83 V3.3 3g 20 Keys since it seemed to be one of the newest(correct me if I'm wrong).
It says that hardspl and a 1.65 radio is needed so i downloaded hardspl1.22-nike-shipped and the official rom linked in the wiki where the 1.65 radio seems to be included.
-I connect my phone (without sim and sd)
-and run the Nike CustomRUU
-It's starts quite normal but when the progress bar is shown (at 0% to be exact) I get to hear the disconnecting and connecting sounds of windows and some moments later the setup is aborted because of connection issues.
This problem occurs everytime at the exact same moment so I guess it can't be a broken cable...
I'd be very glad if you could tell me what I'm doing wrong or at least share some ideas of what I could try with me
Thank you in advance
Merglasch said:
Hi Guys^^
I'm quite new to all this flashing stuff and spent the last week trying to figure this out but it seems I'm missing something.
I've got a O2 xda star (niki300) phone with a 1.58.16.27 radio (i think) and spl 1.16. I wanted to install a new rom and choose the Salvy.C83 V3.3 3g 20 Keys since it seemed to be one of the newest(correct me if I'm wrong).
It says that hardspl and a 1.65 radio is needed so i downloaded hardspl1.22-nike-shipped and the official rom linked in the wiki where the 1.65 radio seems to be included.
-I connect my phone (without sim and sd)
-and run the Nike CustomRUU
-It's starts quite normal but when the progress bar is shown (at 0% to be exact) I get to hear the disconnecting and connecting sounds of windows and some moments later the setup is aborted because of connection issues.
This problem occurs everytime at the exact same moment so I guess it can't be a broken cable...
I'd be very glad if you could tell me what I'm doing wrong or at least share some ideas of what I could try with me
Thank you in advance
Click to expand...
Click to collapse
you'd better try again to update the Hard SPL and use HardSPL v.1.15 ~ http://forum.xda-developers.com/showthread.php?t=355730
with hard SPL that you can flash any rom and make CID, Security Unlocker too
thanks for the answer but sadly it doesn't change a thing
I run this UpdateRomUtility from flash-uspl but it gives me the same connection error (i think it lost connection as the phone went into 4 color mode, but I could be wrong)
Or is there another way to install this?
are you sure have followed all the directions given jockyw ??
What OS are you using on your computer??
have you deactivated anti- virus program or firewall on the PC before doing the flash HardSPL ??
sorry not my intention to return to ask, but I want you to more thorough and more detailed in discussing a problem so that you succeed in overcoming
I'm using Windows 7 64 bit Professional
about the instructions, I tried two different ways:
1. Connect my switched on phone. Then run the RomupdateUtility from flash-uspl-niki. (gives the Connection issue)
2. Do the steps with the sspl first. I put the sspl in the root directory of my phone and execute it through my phone. It goes in color - mode then USB is written on the screen ->I unplug and replug my usb cable->nothing changes. Running the Romupdateutility doesn't work because it says it isn't connected.
windows firewall is switched off
will test again with antivir also deactivated
Merglasch said:
I'm using Windows 7 64 bit Professional
about the instructions, I tried two different ways:
1. Connect my switched on phone. Then run the RomupdateUtility from flash-uspl-niki. (gives the Connection issue)
2. Do the steps with the sspl first. I put the sspl in the root directory of my phone and execute it through my phone. It goes in color - mode then USB is written on the screen ->I unplug and replug my usb cable->nothing changes. Running the Romupdateutility doesn't work because it says it isn't connected.
windows firewall is switched off
will test again with antivir also deactivated
Click to expand...
Click to collapse
if your computer is running Win 7 64- bit, using WMDC 6.1 Driver for Windows Vista (64-bit) ~ http://www.microsoft.com/download/en/details.aspx?id=3182
thanks that worked^^
any advice about which rom and radio I should install?^^
Merglasch said:
thanks that worked^^
any advice about which rom and radio I should install?^^
Click to expand...
Click to collapse
You just try with Insomnia ROMs ~ http://forum.xda-developers.com/showthread.php?t=497347
Works like a charm^^
Thanks to your help I've got a much more enjoyable phone now
Thank you and
Have a nice day ^^