Hi guys,
i flashed my Rapahel to ROMeOS² v1.05 (B-20748.1.4.0).
Now I would like to sell the phone. What Do I have to do to make the (Roms's)phone look like original that the buyer can (in case of guarantee issues) send it back to the german provider o2.
Thnks guys,
duffy6
Download here my dumped o2 Rom, after flashing the Rom flash the Stock-SPL from here.
Regards,
Chris
Hi!
Thx for your answer. I flashed your dumped o2 file. Worked like a charm.
But flashing the the HardSPL I am a little bit confused. the link you posted says:
UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from this post.
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+6. to verify, volume down + reset, see version number on tricolour screen, should now just say 1.90.0000.
that's it.
Click to expand...
Click to collapse
Point 1 to 3 is clear. But I don't understand point 4. What should I copy and overwrite?
Can you please explain that to me?
Thnks!
duffy6
duffy6 said:
Hi!
Thx for your answer. I flashed your dumped o2 file. Worked like a charm.
But flashing the the HardSPL I am a little bit confused. the link you posted says:
UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
Point 1 to 3 is clear. But I don't understand point 4. What should I copy and overwrite?
Can you please explain that to me?
Thnks!
duffy6
Click to expand...
Click to collapse
You do not need to understand that as it is a bit confusing. Just one thing copy sspl-manual.exe to the phone and run it on the phone using file explorer or something. then just flash any stock spl you need using RUU. It is easy nothing else needed.
Okay, that means I was wrong by FIRST flashing the original ROM?
So this is how I have to do it now:
FIRST copy the sspl-manual.exe to the phone and execute it on the phone
THEN flashing the original ROM
and that's it?
right?
Related
Folks,
I upgraded my 8525 to the lastest firmware available on htc's website (2.15.502.3) with bootloader 1.11. I had backed up my pim.vol to save my contacts. When copying it to my newly flashed device, the phone app didn't work well and contacts didn't pull up.
I would like to downgrade to the original firmware so I can back up my contacts using outlook and then reinstall the firmware. I'm not sure what version I had before, but figure I'll try 1.30.502.1 with bootloader 1.04 and work my way up.
My question is, can I use CustomRUU to do this? If so:
do I just download the correct rom from http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and extract the nbh and place it in the same directory as RUUWrapper.exe?
what SPL radio button to I select on the gui (Force?)
Any help would be greatly appreciated.
Mike
bohnman said:
Folks,
I upgraded my 8525 to the lastest firmware available on htc's website (2.15.502.3) with bootloader 1.11. I had backed up my pim.vol to save my contacts. When copying it to my newly flashed device, the phone app didn't work well and contacts didn't pull up.
I would like to downgrade to the original firmware so I can back up my contacts using outlook and then reinstall the firmware. I'm not sure what version I had before, but figure I'll try 1.30.502.1 with bootloader 1.04 and work my way up.
My question is, can I use CustomRUU to do this? If so:
do I just download the correct rom from http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades and extract the nbh and place it in the same directory as RUUWrapper.exe?
what SPL radio button to I select on the gui (Force?)
Any help would be greatly appreciated.
Mike
Click to expand...
Click to collapse
This post was a pleasure to read. Thanks for doing your homework before asking.
Answers:
1. Yes, extracting the NBH and putting it in with the RUU will work fine.
2. Unless you are downgrading the SPL at the same time, just let the RUU auodetect the version - or manually select the correct one. ONLY use force if you want to overwrite the current SPL/IPL. If you use autodetect, it will still complete the flash - it will just leave the SPL and IPL untouched - which is nice and safe.
WAIT I reread your post. You really should install hard SPL. I thought you had. This will protect your phone from getting bricked. It is a sticky. If you don't do that (which I advise AGAINST, then use the force radio button. In case I wasn't clear - go and put HardSPL on first. It is like a condom - the best thing to happen to since the ROMs started to surface.
Thanks
todd_jg said:
In case I wasn't clear - go and put HardSPL on first. It is like a condom - the best thing to happen to since the ROMs started to surface.
Click to expand...
Click to collapse
Got a good chuckle from that. Thanks for your help.
Mike
I am planning on returning my phone to Cingular for warranty repair, how can i return all of the settings to factory default including ROM? Do I need to remove the hardspl BL? How do I do that?
Thanks for your help.
I'm a total newbie to Windows Mobile. Trying to app/registry unlock my phone, I downloaded regedit.exe and the regeditSTG2.exe to my pc. I've tried dragging them to the Qtek 8500. The regedit.exe is on the phone, the STG2.exe doesn't even appear. Trying to run the regedit.exe from the phone results in nothing - leftclicking just shows up a "General" properties tab, with file type, Location \ (must be root, right?) , file size etc. Right clicking offers cut, copy, shortcut, delete and rename.
1. So how do I run it?
2. The regeditSTG2 is so called "digitally signed." What does this mean, and what benefits does it bring?
3. Why wont the regeditSTG2 allow itself to be dragged onto the "mobile device?"
Thank you
There is a regeditSTG2 in cab-file, just copy to your device and launch. You can run it from Start Menu
Thank you Erofich!
I want to flash your 6.1 ROM according as per instructions:
1) make an application unlock
2) copy content of SSPL to the root of your device
3) run SPL.lnk
4) run ROM Update Utility.exe on your PC
5) follow the instructions
6) wait until flash process will be completed
My current ROM is 1.02.252.1. I want to have the safest possible flash possible. The application unlock contains two pieces, one the regeditSTG procedure, and two, the SDApplication unlock tool.
Q1. If I understand correctly that is step one above, right?
However, I've seen some comments about the RadioQuote:
Originally Posted by landwomble
* whether this replaces the radio? If not, anything I should be aware of?
where you answered that
Just flash latest cingular rom first, and flash wm6.1 over it
Q2. a )If I flash the latest cingular rom first, wouldn't I then still need to CID unlock the device, or is there a way to use the SSPL for that process? b) If I don't flash the cingular rom first, what will happen to the radio?
Q3. Someone, I believe it was Raskell, posted a back up procedure in case of bricking which entailed extracting and *.nbh file from the official RUU installer. a) Where do I find the official RUU installer? b) If I do not follow this back up procedure, can I still do it if I fail - that is can I do it even if the 8500 would be non-functional?
Thanks
dbrotzen said:
The application unlock contains two pieces, one the regeditSTG procedure, and two, the SDApplication unlock tool.
Click to expand...
Click to collapse
No, application unlock contains only one piece regeditSTG procedure for any Qtek or i-mate ROMS. And SDA Applcation Unlock for Cingular ROM
dbrotzen said:
Originally Posted by landwomble
* whether this replaces the radio? If not, anything I should be aware of?
Click to expand...
Click to collapse
All the my, or Jony_aa's ROMS doesn't flashes radio or something else. These ROMS contains only OS part
dbrotzen said:
Q2. a )If I flash the latest cingular rom first, wouldn't I then still need to CID unlock the device, or is there a way to use the SSPL for that process?
Click to expand...
Click to collapse
You can flash via SoftSPL, BUT it will be safer if you will make a SuperCID procedure (but pay attention to all the steps, otherwise you can crash your radio and it cant be recovered)
dbrotzen said:
b) If I don't flash the cingular rom first, what will happen to the radio?
Click to expand...
Click to collapse
I don't know. But this sequence (any ROM->Cingular 4.1.502.5 official rom->any custom rom) already tested many-many times.
dbrotzen said:
Q3. Someone, I believe it was Raskell, posted a back up procedure in case of bricking which entailed extracting and *.nbh file from the official RUU installer. a) Where do I find the official RUU installer? b) If I do not follow this back up procedure, can I still do it if I fail - that is can I do it even if the 8500 would be non-functional?
Click to expand...
Click to collapse
Links from 4pda.ru to OFFICIAL roms:
European Qtek 8500 v3.6.251.0 ROM
http://www.myqtek.com/media/914075-ruu_star100_3.6.251.0_02.67.30_qtekeur_ship.exe
Cingular 3100/3125 v4.1.502.5
http://www.america.htc.com/support/docs/RUU_STAR100_4.1.502.5_02.79.30_CWS_SHIP.exe
Russian Qtek 8500 v3.6.261.0
http://www.myqtek.com/media/817887-ruu_star100_3.6.261.0_02.67.30_qtekrus_ship.exe
Scandinavian Qtek8500 v3.6.252.0
http://www.myqtek.com/media/758929-8500_upgrade.zip
Dopod 710/S300 v1.2.709.1
http://www.fs2you.com/en/files/762f56b8-e294-11dc-9e1b-0014221b798a/
i-mate Smartflip v1.2.301.2
ftp://ftp.clubimate.com/i-mate_Smartflip_WWE_1.2.301.2_ship.zip
And the steps to flash new StarTrek device to any unofficial ROM:
- make an application unlock
- make a SuperCID unlock
- launch SoftSPL on your device
- flash ANY startrek's ROM
Erofich, thank you ever so much!
can't perform backup of registry for i617 blackjack 2
when i use this registry editor to backup my phone it give me the error "unable to perform backup" can anybody tell me why? is there any registry editor that backs up windows mobile standard?
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
branko.savic said:
Sorry if this is a stupid question but I am in a hurry so have no time to search and investigate in this mater by myself for now!
I have flashed several roms in the past, right now I am running RomeOS 1.40
However I have now sold my device and need to revert to the original rom and SPL!
I have the Swedish rom, but the problem is that the file I have is RUU_Signed.nbh I dont have the wrapper or what it is called so that I can flash my raphael!
Also, do I need to SPL lock the device again? and if so how do I do that?
Last but not least, after flashing RomeOS, I got alot of information on the first screen (You know when you first start the device where it shows the radio version and everything!) But the problem is that I have tried to flash other roms but the information on the first screen is still there!
How do I get rid of it so it looks like the original?
Hope you know what I mean and how to help me!
Thanks in advance!
Click to expand...
Click to collapse
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
karimartine said:
The wrapper is included in the attached file along with the htc splash screen. the original spl also in there so do the following:
1- extract the zip file and put the customruu + your RUU_Signed.nbh in one folder and run that to get your original rom
2- put now the customruu + htcsplash together and flash to change the splash screen
3- Now use the spl tool to revert to the original spl
Click to expand...
Click to collapse
Thank you, I did everything you told me and it worked like a charm!
I cant thanks you enough!
Anyone please confirm I am thinking right?
Here’s what I did:
1.From T-mobile.cz I got the factory Czech T-Mobile Rom (*.exe)
2. I extracted the *.exe with WinRar and got a bunch of files.
3. I took out RUU_Signed and extracted it with NBHtool and got 4 *.NB files:
769.nb
PrimarySplash.nb
SPL.nb
Windows.nb
4. In the meanwhile I extracted my original reconstructed Dutch T-Mobile RUU_Signed.nbh (confirmed working) and took the Windows.nb
5. From the Czech *.nb files I deleted the windows.nb and replaced it with my Dutch windows.nb
6. With htcRIE 0.5.0.12 I put the three Czech NB’s:769.nb (suppose radio), PrimarySplash.nb and SPL.nb together with The Dutch windows.nb together in New RUU_signed.nbh.
7. I put the newly created RUU_Signed back into the folder with files from step 2.
8. Using Winrar I stuffed ala these files together in an *.sfx file that has an instruction saying that after extracting the sfx it should start RomUpdateUtility.
9. So far so good! I clicked the sfx and it would nicely extract and start the Czech RomUpdateUtility. The utility being Czech is no problem as I/we have been using it probably a sillion times and don’t read it.
10. Now I don’t have the guts to test it on my Dutch MDA Vario IV JJ but want to know wether this would work in case of RMA.
I remember that the Dutch factory ROM-upgrade for T-Mobile Vario III (Kaiser) would restore everything: SPL, Splash etc) By doing the above I somehow think I have re-created sort of a Dutch “factory” ROM upgrade that will restore everything back to stock.
Suppose this works, will I be able to go back to Hard SPL a second time? (heard some rumors...)
I want you guys to know that I don’t have any education in ICT but consider myself smart enough to figure things like this out . However… I am not too sure about what I have created.
Thnx. For any kind of feedback.
Am willing to upload this for people who want to try.
Free Rapidshare (10 downloads) if needed I will put it in my FTP.
Was it not in The raphael original shipped ROM wiki?
Also if it would help, I think I still have the files backed up at home somewhere. If you want I could look for it.
haaibaa2 said:
Was it not in The raphael original shipped ROM wiki?
Click to expand...
Click to collapse
It was but when reading the thread that goes with it I get serious doubts about that one working well
I have them backed up as well but I never dumped the splash, radio and more important the SPL. and everyone is talking about SPL's lately but no one can answer me wether one of the offered solutions is a working one.
So I was thinking to sort of creating a oneclick solution for whenever a RMA occures to me again
Was this a dumb question?
Dust2Dust said:
Was this a dumb question?
Click to expand...
Click to collapse
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Captain_Throwback said:
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Click to expand...
Click to collapse
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
I don't know of any "safe" way, no. I have no confidence that the Stock SPL from the stock SPL thread will work, either - that's why I had that thread closed. After you flash the stock SPL from the Hard-SPL thread, you risk bricking your phone if you try flashing a created ROM to it (even if it is created from parts of stock ROMs).
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Captain_Throwback said:
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Click to expand...
Click to collapse
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Dust2Dust said:
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Click to expand...
Click to collapse
Well, I think any future conversation on the whole "flashing back to stock" can be carried on in JZ SmartMort's thread with the instructions on how to do that. He also explains in there why none of the SPLs that I extracted will ever overwrite Hard-SPL. Unless Olipro or cmonex enlighten us on how they were able to modify that 1.90 SPL to overwrite the Hard-SPL, that's the only one that'll ever work.
I did see you posted in that thread, but I think if you really NEED a different SPL than one that's in an existing stock ROM, that if you PM Olipro or cmonex, one of them may be able to help you.
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
gdekeijzer said:
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
Click to expand...
Click to collapse
It does but it's for MDA Compact IV, aka Touch Diamond... but still am going to look what's inside
edit: cewl it had the splash I wanted inside.
Had the guts to flash...
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Dust2Dust said:
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Click to expand...
Click to collapse
If you're able to successfully flash your Franken-ROM w/stock SPL to your phone after flashing the 1.90 warranty SPL, your phone still works, and you can connect to a computer using Activesync or Mobile Device Center, there's no reason you shouldn't be able to re-flash Hard-SPL onto your device. The key words in that sentence are "if" and "successfully" . . .
Captain_Throwback said:
The key words in that sentence are "if" and "successfully" . . .
Click to expand...
Click to collapse
Yep...
those are the keywords
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure