I have searched the site and the net and have not found how to do this. I am using wireless sync from Verizon to sync all my stuff - I want to disable activesync on my titan and not have to constantly turn it off (it uses memory). A registry fix? Any help would be appreciated...
kashabrown said:
I have searched the site and the net and have not found how to do this. I am using wireless sync from Verizon to sync all my stuff - I want to disable activesync on my titan and not have to constantly turn it off (it uses memory). A registry fix? Any help would be appreciated...
Click to expand...
Click to collapse
DL Dotfred Taskmanager.....go into notifications and disable the repellog cannot remember exactly but it is the one that has to do with timesync....there are 3 of them....I believe it is the middle one....you can also disable by going into phone settings and disabling time synchronization....
Related
-PLEASE KEEP THIS THREAD FOR SOLUTIONS AND UNLISTED PROBLEMS- Not COMPLAINTS!!!! A Complaint without a Solution is Worthless
I definitely don't have any good answers to the age 'ol problem of connectivity issues with Activesync. I have been scouring the internet for hours and hours and hours trying everything and anything imaginable to get it working flawlessly. I haven't seen a Thread like this anywhere so I thought I would make one with easy, quick navigation to a system of solutions.
What I am running and have tested the following avenues on:
ROM Version: DCD 3.2.5Radio Version: 3.42.30
---------------------------------------------------------------------------------------------------------------------------------------
Here is what all the different forums recommend:
- Reinstall Activesync- 4.5 is the most resent and, supposedly with the fewest bugs.
- Restart both desktop/laptop and also soft reset the PPC
- If you are running a Firewall, either:(a) Follow the instructions on this page to add ports to your firewall to allow communication with Activesync(b) Completely turn off your Firewall. "Not reccomended"
- Some sites recommend that you turn off your antivirus to see if that helps. "Also not recommended"
- Ensure that no other program is using the same port/ports that activesync also uses. Most of these programs are file sharing, remote login, and other similar programs. -If other programs do exist, either alter their ports or turn them off completely
- On the PPC- toggle the "Enable advanced network functionality" on and off- located START->SETTINGS->CONNECTIONS->USB to PC
- Opening Outlook. Some say this helps Activesync connect.
- One far fetched idea is to continuously pull out and plug in the USB cord until it connects. If it still doesn't connect, restart PPC and try again.
- Replace the USB cable and/or trying different USB ports on the computer---------------------------------------------------------------------------------------------------------------------------------------
I have done everything imaginable and I can't seem to get any kind of a reliable connection.
Here is a list of all the issues I have had:
~ Activesync connects and never syncs, arrows turning~ Activesync in the Sys Tray says connected- arrows stopped, but the program says connecting- arrows turning- Never connects~ Activesync connects, starts to sync- then suddenly disconnects and no longer recognizes the device~ Activesync tries to connect but says it cannot communicant with device- Runs troubleshooter and finds nothing wrong~ Windows identifies device as unknown and avtivesync does nothing- even searching for the device turns up nothing.
Some of these issues are a hit an miss, but I am almost guaranteed to have one of the above problems every time I try to connect.
If anyone has any more ideas for me, that would be great! Please help spread the word of known fixes to the horrible world of Activesync.
I truly hope this helps everyone who reads it.
-PLEASE KEEP THIS THREAD FOR SOLUTIONS AND UNLISTED PROBLEMS- Not COMPLAINTS!!!! A Complaint without a Solution is Worthless
Have you tried deleting all the mobile devices showing up and then start over.....you can also go into the device manger and delete everything there as well....if anything is showing....
I am experiencing the exact same issue with the exact same Rom/Radio. Now when I go to Connections\USB to PC and try to uncheck "Enable Advanced network functionality" I get this message: Failed to disable RNDIS to use Serial. Hope this helps in troubleshooting.
Thanks for all you do DCD and GC!
Web2mail calendar & Desktop Calendar
After signing up with Web2mail live version my active sync has two accounts. The outlook account I familiar with and the exchange server account via mail2web.com.
Is it possilbe to sync my desktop calendar under activesync with the exchange server calendar? Any pointing to help, threads or pdf manuals would be greatly appreciated.
Ciao
Darrell
I believe that if you click on each account under activesync you will be able to select what you want to sync with each, but cannot be in both. I do all but e-mail on my work PC. Use the Exchange server for e-mails. When I plug into cable on PC it will sync both the exchange server and the PC items.
Hi folks, my car's flunky bluetooth kit flakes out when downloading the my touch pro's contacts. If I empty out the contacts list on the phone, the car's bluetooth kit works fine.
So, one way to prevent the contacts to download to the car is to disable PBAP profile. Is there a reg key or tool to do that?
ATT's Fuze version of activesync won't let me sync by category (the option is disabled), so I can't just reduce the number of contacts downloaded.
I've searched the wiki and googled it, no joy.
Cheers, and Thanks!
If i'm not mistaken, it was Bluetooth SIM Access Profile (BTSAP) which u can disable it in many ways.
Maybe u can prevent the boot call by deleting this key.
[HKEY_LOCAL_MACHINE\init]
"Launch99"="SAPSettings.exe"
I tried this and no joy. This only turns off the SIM Access Profile (SAP) which btw can also be turned off with the Bluetooth manager on the phone.
Anybody have luck with reg keys/tools?
Disable PBAP in WM 6.1
See the solution to this issue in the thread at http://forum.xda-developers.com/showthread.php?p=3848325.
JimT
I've scoured the forums and the net but can't find how to turn off the "Enable advanced network functionality" in Windows Mobile 6.5.
I loaded my first WM6.5 ROM a while back and need to update it but can't get sync'ed to load the update.
Please point me in the right direction, I've lost most of my hair already, bout to pull the rest out.
Thanks in advance.
Settings>Connections>USB. I always turn it off too since it causes issues with VPN, firewalls, wireless, and is just plain annoying since every device you connect then creates a hidden hardware entry on your PC for the network connection and the device/usb connection.
What is also funny, is most Vista machines require this "new" setting to be turned off to connect as well.
Here's a link in case you want to get rid of those pesky extra device manager entries.
Device Manager does not display devices that are not connected
http://support.microsoft.com/kb/315539/en-us
Cheers,
hilaireg said:
Here's a link in case you want to get rid of those pesky extra device manager entries.
Click to expand...
Click to collapse
Had that already, that is how I knew about them all. Just a pain to delete them, and after 50+ are on your machine it seems to start to slow things down.
So I've had this S743 for 3 days now and I thought I had it setup correctly to use wifi for data comm.
wifi enabled and selected to use my home network. I can see the radio tower status icon.
Under the comm manager data connection is off.
I have a very simple $45/mo plan with no data plan.
Over the last 2 days I have been surfing the web a bit did some email tests with my ISP and used the on board GPS app which is horrible. Not heavy usage but experimentation to see if I like how the phone works.
Then after 2 days I get an email from AT&T that I have extremely high data usage exceeding my account limit and that I should sign up for a data plan at once.
$29 over 2 days for this little bit of fluff? A total of 2,900kb in data.
So I call up AT&T and they tell me this and that and want me to sign up for a plan which I may do.
But I want to be able to know that the datacomm is happening via WIFI when I can see it's in service.
They also told me that all GPS data is forced through 3G and bypasses WIFI???
Can anyone here give me an idea about what I may be doing wrong and whether AT&T is correct about the GPS service?
Is there a better GPS app that doesn't do this? This one pretty much stinks anyway. A resolution of 1000 meters doesn't cut it.
AT&T also informed me that I can't have a smart phone without a data contract. Really? I've had one for 6 years.
Thanks for any light you shed on the subject.
One th I have subsequently found out is that if data connection is off and wifi is off then when I go into IE and start surfing it does bring up pages. Then when I go back to the Comm Manager the Data Connection is still off for an instant and then it automatically turns itself on as though it had been turned on by use of IE and the status was just being updated.
Is there any way to stop this?
The only way to completely stop data usage is to delete the APNs from within the Settings->Connections dialog.
ashasaur said:
The only way to completely stop data usage is to delete the APNs from within the Settings->Connections dialog.
Click to expand...
Click to collapse
What exactly are APNs? I don't see anything labeled that way in that section on my phone.
Thanks for the reply.
Try to download the NoData app; google it. I believe it's freeware. Toggle all connections to "Disabled" and that should do the trick..
About the GPS; all I can think of is that the QuickGPS app (under desktop accessoires or whatever it's called in english) automatically downloads new info about the GPS locations.
GorillaHuman said:
Try to download the NoData app; google it. I believe it's freeware. Toggle all connections to "Disabled" and that should do the trick..
About the GPS; all I can think of is that the QuickGPS app (under desktop accessoires or whatever it's called in english) automatically downloads new info about the GPS locations.
Click to expand...
Click to collapse
Thank you.
I did manage to delete the APN and that did work but now I've decided to keep this phone, put it on an AT&T GO-Phone plan and add a very limited data plan. So I will be trying to find a better way to make certain it doesn't always automatically go for the GSM even when you have it turned off.
I looked at your suggestion but it sounds like it conflicts with netframe 3.5 which I have installed.
Now that my G3 has been upgraded to Lollipop, I thought my issues would be resolved. The biggest problem I'm noticing now is how long everything takes to render on my phone. Facebook, Instagram, and GMail all take forever to render and I'm stuck with a spinning wheel while it loads the content. At first I thought it was my internet and I've tried the usual (resetting, unplugging, etc...) to no avail. I even called the cable company and they said my connection was fine. This past weekend I bought a cheap-o tablet off craigslist and can't help but notice how quickly content shows up. I mean, I instantly have GMail notifications while my G3 says I have none without a manual refresh. Facebook and Instagram, both, show me content instantly while my G3 is still sputtering.
What makes it more odd is that I don't have this problem when I'm on mobile data or someone else's wifi. Just my own. Is there a setting or something somewhere that I've overlooked?
I was having slow wifi issues until I disabled ipv6
6NomoN6 said:
I was having slow wifi issues until I disabled ipv6
Click to expand...
Click to collapse
How do you do that? I don't see anything in the wifi settings remotely resembling ipv6.
justbenny2k said:
How do you do that? I don't see anything in the wifi settings remotely resembling ipv6.
Click to expand...
Click to collapse
I use this: disable ipv6
The problem is that you would need to disable the ipv6 each time you connect to wifi, I'm pretty sure there are tutorials with how to get scripted set up to automatically turn ipv6 off when you connect to wifi, but I'm not sure where those would be and I'm not positive what you would search for to find that tutorial.
Anyway, hope I could be of help!
6NomoN6 said:
I use this: disable ipv6
The problem is that you would need to disable the ipv6 each time you connect to wifi, I'm pretty sure there are tutorials with how to get scripted set up to automatically turn ipv6 off when you connect to wifi, but I'm not sure where those would be and I'm not positive what you would search for to find that tutorial.
Anyway, hope I could be of help!
Click to expand...
Click to collapse
I did some googling after your initial comment about ipv6 and found on a Verizon forum the link to an app called DNSet. It seems to have worked for me. Hopefully this link will help others:
https://play.google.com/store/apps/details?id=com.dnset&hl=en