need BA keyboard cable - MDA III, XDA III, PDA2k, 9090 Accessories

hello,
i broke the flat little cable that connects the keyboard to the mainboard.
any idea where i can get another one ?
i'm from germany.
thank you.

Try to search for flex @ ebay

update me on this thread baal zeebub since I too broke my keyboard flex. just update on where you purchased your flex cable!

Related

Desperately looking for mini usb jack for my Polaris 5$ reward

Hi, my usb connector on my Polaris (O2 XDA Oribt2) broke, so i tried to buy a new one. I am looking now since about 1 week to get this replacement mini usb connector with 11 pin.
Anyone knows where i can buy one ?
I nedd an SMD part which i can solder on the htc board.
Thank you
http://cnn.cn/shop/p3650-touch-cruise-polaris-c-277_456.html
Thanks man
deleted
deleted

[Q] HELP!!! broken black wire/connector inside HD2

Hello all.
While I was taking my HD2 apart to replace a cracked screen (glass digitizer) I accidentally broke the connector off one of the wires. The wire is black and a few inches long with a silver and round press on connector on each end. It attaches to the board that houses the vibrator motor and runs down the right side of the phone (if you were looking at it face down and partially disassembled).
Unfortunately, I lost the metal piece that broke off the wire (the thing is tiny!), so I can't just solder it back on. Any idea on where I can buy a replacement? I've spent about 6 hours today on ebay and google to no avail. Searching for "HD2 black wire" and anything similar is hardly efficient, but that's all I know about it.
Any help appreciated.
Thanks,
Chris
Good question, I think I damaged the cable to the volume buttons so it would be cool if someone has an adress where we can get spare parts except LCD and Digitizer..
this guy on ebay seems to be selling an HD2 in parts. you might find what you need here:
http://stores.ebay.co.uk/Right-Click-Enterprises/_i.html?_nkw=hd2&submit=Search&_sid=131407386
Thanks, I sent that guy a message and hopefully it'll work out.
Anyone else have a source?
connector of my hd2 is also broken HTC says that the mainboard must be change and I have to pay € 230 because that is my responsibility
I think you have damaged your coaxial cable connector for wifi and bluetooth. Google will help you perhaps.
I believe that my wifi/bluetooth cable is broken, as I have no wifi or bluetooth signal since dropping my phone as reported in a previous post of mine. Can anybody advise me on the difficulty of undertaking this repair myself, does it involve complete disassembly of phone, any soldering etc. If this is the case I don't feel confident enough to do this so does anybody know of someone who does this sort of repair, I have found the cable on e bay for £7 and it looks like it has push on connectors ?
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.
WiFi and Bluetooth not working
raincybercafe said:
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.
Click to expand...
Click to collapse
Do you think that this is my problem as since I dropped my HD2 I have no wifi (unless sat ontop of router) or bluetooth or fm radio, is it easy to get to the coax cable by removing back cover, whereabouts is it ?
raincybercafe said:
if the connectors on the boards are not broken then all you need is the coaxial cable with connectors on the two end. you need not disassemble the whole set, just open the back cover, connect one end of the cable to mother board and other end to the rigid flex board and that's it.[/QUOTE
Fixed it, opened up phone and spotted that at one end of the black wire the connector was not pushed onto the motherboard securely, I pushed it home and hey presto, wifi and Bluetooth now working, phew, Thanks for your help !
Click to expand...
Click to collapse

[Q] Need some help with accu and soldering

Guys, the microUSB port on my 101 G9 got broken by an accident.
Looks like It needs a resoldering (and due to double-sided main board it gonna cost some serious $). I removed the port entirely as I dont need PC connectivity.
Is it possible to solder a usb cable directly to BAT-/BAT+ points on the board? Or do I need to connect it to microUSB soldering points to work properly?
//sry for my bad english - I'm from Russia and got hella tired today(
Hi Devl547,
first: Your english is perfect, no need to worry.
Devl547 said:
Guys, the microUSB port on my 101 G9 got broken by an accident.
Looks like It needs a resoldering (and due to double-sided main board it gonna cost some serious $). I removed the port entirely as I dont need PC connectivity.
Is it possible to solder a usb cable directly to BAT-/BAT+ points on the board? Or do I need to connect it to microUSB soldering points to work properly?
Click to expand...
Click to collapse
Don't attach the USB cable to the battery points on the mainboard. This will damage your mainboard and battery on long term.
Please look at the area around the broken MicroUSB port and search for a green colored component.
This is the fuse for the 5V comming from the port. You might easily find a soldering point in this area as well.
You should use this as the connection to your cable, nothing else!
If you are unsure, i'll post a picture.
Best regards,
scholbert
Thanks. Actually, I have already soldered a usb cable to microusb soldering points ( nightmare difficulty :3 ).
Looks like it works perfectly, but I think I'd better buy a new Archos tablet next month and use my old one indoor as a internet/video terminal.
Hi. Can you please upload a Picture from the Solder Points how i must solder the 4 wires from a USB Cable? Thank you very much!
scholbert said:
Hi Devl547,
(...)
If you are unsure, i'll post a picture.
(...)
scholbert
Click to expand...
Click to collapse
Hi scholbert!
If you still read this, I'd really appreciate that picture as my micro usb socket came loose and currently I can't charge my Archos G9 101 Turbo.
Thanks,
Nuems
Hi Nuems!
Nuems said:
If you still read this, I'd really appreciate that picture as my micro usb socket came loose and currently I can't charge my Archos G9 101 Turbo.
Click to expand...
Click to collapse
I'm still using my Archos tablets, but i'll need to find my disassembled one to make a better picture i guess
Maybe you're able to locate the camera clip on your mainboard and remove it.
It is located near the micro USB slot...
See this post i made long ago (most informations are valid for the G9 101 as well):
http://forum.xda-developers.com/showpost.php?p=28542261&postcount=41
After you removed the clip you should be able identify the fuse as well.
It is a marked component with a "T" on top.
As told before this is the best place to solder some cable for external charger.
Regards,
scholbert

replacing charging port

One of my relatives been haviog problems with the phone charging, if i slightly move the cable i can see the charging icon blinking andit feels kind of loose, it is not a problem with the charger because it does exactly the same with another USB data cable.
Does anyone knows where can i buy a new charging port AND the flex ribbon? did a Google search but only found the actual microusb port but not the flex cable that connects to the motherboard, any help appreciated.
I don't think it's a flex cable. I think the amaze port is a part of the mother board.
Sent from my Amaze 4G using xda app-developers app
Tty on ebay or any repair shop
damn, i just found a video and yes, it looks like the charging port its actually soldered directly onto the board... guess ill just take it to a repair shop, thanks guys.

Need advise to replace volume Flex cable on THL 5000 Tesla

Hey Guys,
I replaced a screen on my THL 5000T and the volume/power buttom was attached to the main board of the phone with what looks like soldering flux.
I attached the part I bought to replace and hoping I can get pictures of the main board shortly.
Im looking for advise to remove the old flux and installing the new flex cable.
Thanks for giving the time !!
Veder
Couldnt attach photos so heres the link to the one i ordered
Flex Cable: http://www.aliexpress.com/item/Orig...-0-HD-1280x720-MTK6592M-Octa/32332980148.html
Anyone?

Categories

Resources