Update under vista - iPAQ rw6828, XDA Atom Software Upgrading

This is the usb driver for the atom exec,
go to panel config and replace the driver of the mobile device by this one and it's work perfectly
http://bensound.be.cx/Driver_usb.zip

It works perfect after updating that driver manualy from the zip , it used to say target not found before installing this driver manually
thanks a lot for the tip DjBen3 , mine is not exec and normal atom but it works on atom too

DjBen3 said:
This is the usb driver for the atom exec,
go to panel config and replace the driver of the mobile device by this one and it's work perfectly
http://bensound.be.cx/Driver_usb.zip
Click to expand...
Click to collapse
How about for Atom Black bro..could you suggest the driver?

Related

How to upgrade Eng Atom exec to CHI ROM ?

I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Try putting it into bootloader mode before connecting to your pc :wink:
Can country ID be changed on Atom Exec ?
Tks victoradjei
I actually tried both get in bootloader before / after connect USB, it looks same. The problem is USB not connected, but it is fine if connected on normal status, it can syn to PC.
Is it possible to change Country ID of my Atom Exec then update ROM in syn mode instead of use bootloader ?
Did you also try reverting to one of the regular Atom roms and upgrading from there? Someone has done this upgrade. Search a bit in this forum.
my XDA ATOM EXEC have the same problem,but Xda-Atom-Exec-ENG-20060721.exe have any question.
lawsonxie said:
I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Click to expand...
Click to collapse
hi there, last time i tried to upgrade, i also got that msg. this is the problem, dont put the atom exec on bootloader. just upgrade ur atom exec at "turn on" position. then start the upgrading.
ps : can u email me, where can i get the chinese rom? my email is : [email protected]
thank you
somebody say he know the way ,but need 50 REPLY to suport, your can try to ask him
http://www.discuss.com.hk/viewthread.php?tid=2375924&extra=page=1
i got other way that flash to the CHT rom. You can use the ultraedit sofware edit the diskimage.nb0 file. only need edit the first row of this file. ( you can get the diskimage.nb0 fine in the c:\windows\temp after run the DSUU, BTW you can select see the protected and hided file option in th browser). As the changed value. you can refer the diskimge.nb0 filr in the CHTrom DSUU. detail you can refere the thread here: http://www.pxdxa.com/read.php?tid=21205
I use it to change my new atom exec.
please tell me where can i download the Xda-Atom-Exec-CHT-20060721.exe ROM , chinese rom, thanks
www.seeo2.com
I was just update ENG Atom Exec to CHT Atom Exec,
use ur UltraEdit, open a file which name is diskimage_Ver.nb0 and u will saw the 1st line will be 07210622 change it to 07210629
then save it. Ha Ha..... you can start ur upgrade now.
diskimage_Ver.nb0 will auto creat in c:\windows\temp\ only after u run the rom update Utility
i want to rom chinese atom
i want to rom atom chinese u upload to new post
please tell me where i can download the Atom Exec chinese ROM, i trie the seeo2 website but it won't allow to download the chinese rom because my phone is registered as with english rom...thanks

Internet Sharing through USB with WMDC 6.1 and Vista???

I have the gullum prophet VIII rom
When I try to share the internet connection I have on my Dopod 818pro, I enable the internet sharing on the Dopod and click connect.
Once I click connect, windows vista discover a new device and need driver for it?? and cannot find any driver for it.
It mention a Generic RNDIS driver needed and hace following error:
Description:
Windows detected a new device attached to your computer, but could not find the driver software it needs to make the device usable. Each device manufacturer typically includes driver software of a CD that comes with the device, or as a download from its website. The hardware ID of your device is USB\VID_0BB4&PID_0303&REV_0000.
Problem signature:
Problem Event Name: PnPDriverNotFound
Architecture: x86
Hardware Id: USB\VID_0BB4&PID_0303&REV_0000
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 1033
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
Any one encounter the same problem??
Where to get the Generic RNDIS driver for my dopod?
FOr your information I have try enable and disable :
Enable advanced network functionality ( on Dopod )
Allow USB connection connection ( on WMDC 6.1 )
Please help me to solve the problem.
Thank yiou.
just try out on a XP machine and internet sharing connect suessfully.
Wondering y this cannot work on Vista machine.
Please HELP.
Thank you.
All professional !!
Please help me to solve it out???
Or this question have been post somewhere in the forum?
Please point me out.
Thank you.
will wait some more or i'll downgrade my vista to XP Pro.
TQ
u need wmdc sync centre for which u need to get genuine test file and i hope u use vista ultimate ,have you done all this and is your sync centre working fine ,and did you try other roms like gullum7 or wm5
kamalneet said:
u need wmdc sync centre for which u need to get genuine test file and i hope u use vista ultimate ,have you done all this and is your sync centre working fine ,and did you try other roms like gullum7 or wm5
Click to expand...
Click to collapse
yes, i have the WMDC ver. 6.1.
it is not the rom problems, but Vista Ultimate, coz it is asking for a new driver.
When connect to WinXP Pro, the driver is automatically installed.
Thank you.
well, today i have reinstall the Vista Ultimate and guess wat??
ALL the problems solve.
I manage to connected.

Can anybody flash rom on windows vista?

help me...
WWE2.15 can be flashed in to 818pro, others can't...
only under xp or with a virtual machine under vista
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
sorry i use a old win xp pc
but i hear that it works with VMware
and my english ist also bad too
thank you !
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
and did you try do install tha radio rom 2.19?
schnitzelbrain said:
prophet -> throttle diamond and throttle diamon multi lang. both from gullum
kaiser -> throttle II also from gullum
soft and hardspl both phones, everything done under viste home premium 32bit.
no probs at all
Click to expand...
Click to collapse
Do you have a G3 Prophet?
I have a G3 and the radio rom install didn't work.
nope, I have a G4 and still the standard shipped radio rom
I have just tried to install gollum's rom on vista business 32bits, and the installation crashed.
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
babinskyo said:
which virtual machine do you use?
I am running xp on VirtualBox 1.6.4, and i can't flash my qtek s200.
I have configure 1 filter to all my use usb devices.
When i connect my phone, it synce with active sync, but when i run the rom installation program, when my phone displays the bootloader, virtualbox tolds me that it "failed to create a proxy device for the usb device".
Can you tell me how you did?
Note : sorry if my english is aproximative.
Click to expand...
Click to collapse
I use vmware server 2 RC1 with a xp appliance, it works nice and easy.
babinskyo said:
ok, I've found this : http://forum.xda-developers.com/showthread.php?t=313001
I'll try and tell you if it works.
Click to expand...
Click to collapse
I've tried the driver and it does not work.
Thanks for VMware, i didn't knew the server version was free. I'll try it.
Flashing G4 Prophet with VMWare works well.
Thank you both, i've just tried vmware and it works !
vmware is the only way for me anyway to flash in vista. i'm sure it's the same for most of us.
don;t know how other people got the other way i.e old drivers etc to work...
Mmmmh, I think I should be thankful that my update didn't brick my prophet and the kaiser from my friend.
When the update fails on your pc is that always at a certain point ?
Do you have USB 2.0 connections and is legacy support in the PC BIOS disabled ?
Just asking for interest.

Problem upgrading WM5 to WM6

I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error) i tried with WWE_020108_B2_DS Rom but the same happend. The the support agent told me that i need to do it with the boot-loader mode (rec + soft reset) i enter to the boot loader options are
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode
(5) Burn MOT/BL via UART
i plug the USB cable and USB detected come up but in the PC the same error happend (costumer or id model error)
So hwhat can i do
cyberkoolmx said:
I have a Atom life with a 20070326b1ARA ROm a support agent told me that i need to use a M6_ARA_RC2140907B2 ROM i tried running the program with the USB cable, But an error ocurred (Costumer or model ID error)
Click to expand...
Click to collapse
Hi
I have the same problem with my XDA Atom Life Arabic Rom I can't upgrade to WM6 so I think use other option like ROM unofficial
Hi
Today I upgrade my PPC to Medkid's ROM 19214 and is amazing
edited the pass.32 file - worked
I just bought an O2 XDA Atom Life on craigslist. It still had the Windows Mobile 5.0. So the first thing I wanted to do was to upgrade to the latest ROM. I tried the ROM's on MWG.com and on MyXDA.com. Everytime I had the same problem. I had the 20070326B1ARA Windows 5.0 Arabic version. None of the ROM's would work.
I got the Arabic Windows 6.0 ROM on myxda.com and started the install. Once it extracted the files, I opened my Windows/Temp folder on my computer. Using a hex editor I opened pass.32. near the beginning it had the letters WWE. I changed those letters to ARA and saved the file back into Windows/Temp. Then I continued the installation and everything worked.
UPDATE: This also worked with the latest ROM from the MWg website. I don't know if there is much difference except that the MyXDA version includes a program called O2 Connect for updates... which doesn't find any updates.

Upgrade under Vista

This is the usb driver for the atom exec,
go to panel config and replace the driver of the mobile device by this one and it's work perfectly
http://bensound.be.cx/Driver_usb.zip

Categories

Resources