hey folks, got a CDMA Neon400 here.
I managed to find a tested/working Hard SPL for neon, but I am unable to find a working SSPL. I tried the nike SSPL in the sticky, but it forces my phone to black screen and the pc no longer reckognizes the usb device, forcing me to soft reset it back into WM 6.1 Pro.
Anyone who can point me in right direction for a working SSPL for neon, so I can apply this hard spl? I Figure there must be one out there since alot of neon users are using the neon hardspl.
Thanks
Related
Hi Guys, I hope somebody can help out
My SPV M3100 has lost radio completely.
WM6 works fine
I have read all I can, and have tried Flashing various ROMS and Radio's with no luck
It does not say No GSM, just R:None, G:None
I've tried the Mtty thing, did not help.
I tried Hard SPL, Not helping
Super CID, SimUnlock, Nothing
Can my GSM module (Hardware be Broken?)
Any help will be useful!
Cornelius
Rom 3.54.255.3
Radio none
Protocall none
HERM100
ipl 1.01
spl 1.40 Olipro
muscadel said:
Hi Guys, I hope somebody can help out
My SPV M3100 has lost radio completely.
WM6 works fine
I have read all I can, and have tried Flashing various ROMS and Radio's with no luck
It does not say No GSM, just R:None, G:None
I've tried the Mtty thing, did not help.
I tried Hard SPL, Not helping
Super CID, SimUnlock, Nothing
Can my GSM module (Hardware be Broken?)
Any help will be useful!
Cornelius
Rom 3.54.255.3
Radio none
Protocall none
HERM100
ipl 1.01
spl 1.40 Olipro
Click to expand...
Click to collapse
Same problem here seems like lots of radio's are getting broken now
Happend a few weeks ago and impossible to flash a radio.
Hi Trion
Yep...and little help forthcomming.
I can flash a bios, I can flash a radio, I can do just about anything I like.
The PDA functions perfectly.
Just no phone!!
Our local agents are stumped as well.
They now want to replace the main board to get the GSM back!
I'll just hang on a while before I do that.
It seems there is something more going on at the moment, with an increase in dead radios.
Let's first see what the clever people come up with.
Regards
I am having the same problem, I have tried everything and am about to give up. Post if any one finds an answer.
I think that problem isnt the same as NoGSM, can POF help?
The same problem for me...
R: none
G: none
Cingular 8525
Wm6 schaps 3.54b
Hard spl v7, 2.10 Olipro
No solution?
Did you had Radio 1.54???
1.http://forum.xda-developers.com/showthread.php?t=349461
2.http://forum.xda-developers.com/showthread.php?t=395961
yes, radio 1.54.07.00
Thanks, i didn't find that threads.
So i read: no solution. Right?
If this happened to me I'd at least try to reflash the factory rom that was on the phone. For me it would be oz telstra, but I'd flash WM06 instead of WM05 as I don't know where I'd find it.... Maybe the WIKI, but I wouldn't hold my breathe on that 1.
Its worth a shot at least...
Cheers...
here could be a solution, last Post from moska,
http://forum.xda-developers.com/showthread.php?t=369434&page=179
i have Wiondows Vista, so i dont can do it, first must get a Windows XP Xomp...
Hi there, i have a situation that happened to my s200/G4 when i've tryed to update:
First i've updated IPL to 2.20 and it went ok showing on the device IPL 2.20.0001. Then when i've tryed to update SPL to 2.20 also and here the problem acoured. in the end it showed ok but when it rebooted it showed IPL 2020.0001 and SPL 2.20 and nothing else...... after this the s200 always stops at the bootloader screen. I'v tryed the hard reset, soft reset, latest i'v tryed the ppc charge trick(cut wires, etc...) i can even put the s200 discovered in the pc as a usb htc device(bootloader) but when i try to update to a new rom or anything the update program (always used g4 software and confirmed that it is a g4 ppc before update) it says that it can not communicate with the device....?!?!?
well, the device is showing in the device manager as a usb ppc device.
i don't know what to do more.
since he is connecting to the pc, how can i force him to accept any firm?
really this is a complicated situation to me since i am a beginner.
If anyone can help me please do. I would apreciate it.
Thanks
Hi nightRoller
I have the exact same problem, i've have started this thread looking for help and logging all the steps i've been doing with any success:
http://forum.xda-developers.com/showthread.php?t=357045
And like you, i also have my IPL 2.20.0001 and SLP 2.20 and i think that there's where the problem is
So lets see if any one can help us out, and keep me posted if you manage to do something, and i'll le you know if i succeed in the meantime.
Anyone would care to help uus out?
THank you very much in advance.
Cheers
Try Soft SPL
Instead of hard SPL, why don't you try just Soft SPL?
Search the Soft SPL thread, copy the 3 files to your Prophet root (\) dir and execute the SPL link, answer YES to the Program Executing Firewall if it pop up.
You'll need some WM5/6 to be able to operate the Prophet in order to do this, I went from the BootLoader directly to PDAViet Step 1 Temp WM5, after it ask me to tap the sreen to begin to use the device, I follow all the steps in order to have a WM operative, then use ActiveSync to Explore and copy Soft SPL to root dir.
After this, execute Soft SPL from your pocket, a blank screen will came. Press the Camera Button (Just in case), the Execute "ROMUpdateUtility_NV_G3.exe" or G4 equivalent from your nk.nbf preferred WM6 ROM.
Some time you'll have to unlplug the PDA and plug it again so the update to WM5 PDAViet Temp to begin without the "PDA not connected error", please, be advice that Activisync will be disable during this Bootloader stage, I mean, It will not sincro nor anything, but you'll still be able to update to Step 1 WM5.
You haven't actually done HardSPL right. Not an expert so I can't help you do it, there are guides on this forum though. But your IPL wont show 2.20.0001 ... it will have something with G4 in the middle. Sorry I can't be more specific, I only fixed this on my phone last night.
Hey, i recently purchased a HTC Prophet (branded SPV M600 from orange) from a friend.
Since then i managed to get a WM6.1 rom on (shadow 2 i think)
Anyway, back when i did this, i found it very hard.
My prophet is not hardspl'd and i've having trouble changing the rom.
In my effort to change it, i 'bricked' it, however recovered it using one of those WM5 roms.
So my details:
IPL 2.20.0001
SPL 2.10.0001
GSM 02.07.20
Currently i'm running a WM5 rom, however i have managed a WM6.1 rom before, but cannot seem to do it again, whenever i get it installed it just boots to the bootloader.
When trying to HardSPL it just gives generic cannot connect errors.
I've used Prophet Tools aswell as manual guides but to no avail.
Am i doing something wrong?
And btw i'm using WinXP
Cheers, James
Hey, turns out i wasn't following instructions properly - probably due to my tiredness!
I wasn't pressing the camera button on white screen... DOH!
Problem now solved and running 'Vista Clean'
Cheers,
James
Hi guys I need some help. I have a Cingular HTC 8125, I was trying to upgrade the rom on it to a new WM6 and here is what happened.
I have been researching the topic for about 3 weeks.
Its a G4 Device being upgraded with VISTA w/ Moded drivers for Ative SYNC
IPL 2.25.0001
SPL 2.25.0001
I used the shell tool to install one of the roms waited about 2 hrs and finally noticed that the window was NOT RESPONDING so I had to shut down and start over. The phone got to the second screen but froze there now showing
IPL 2.25.0001
SPL 2.25.0001
GSM 02.25.11
OS 10.1.0.811
On the Cingualr Background, I can still enter the Bootloader screen but nothing else?
Nothing else happens I cant connect the phone to the PC to do anything else.
Is it bricked or not is my question and what can I do to flash OEM rom or something that will work.
I tried OEM Cingular rom but I get ERROR 260 No connection to the phone?
Any help will be greatly appreciated!
Bricked phone
You should had firstly either hardspl or soft spl the phone b4 trying to load any rom
It's not bricked as long as you can see the RGB screen (Colors red, green and blue)showing the same IPL/SPL such as yours; IPL: 2.25.0001 and SPL: 2.25.0001. AND PLEASE BE CAREFUL WITH YOUR DEVICE CAUSE ITS G4 MEANING YOU CAN NOT JUST INTALL/FLASH ROM. Make sure that the Rom you flash not contain G3 IPL and SPL which is 2.xx.001. If so, then you will bricked your device.
Desiji is right, you should install rom with softSPL or hardSPL.
Try to flash the Official Cingular Rom or Wizard Love Rom. If success, then you can install other Rom using what desiji said. Just make sure that its a G4 safe rom. And another thing, try to charge battery using wallcharger not in the device. U need enough battery to perform rom flashing.
Hope this help revive your Wizard.
esdee007
WOW !
grrrrr8,you are a quick learner
CateraMV6
Yeah ! I certainly agree with esdee007 and desiji
Thanks
Hey guys thanks, thats what I thought but I think my main problem is the VISTA I need to get a hold of XP and try all that because the Vista is having issues with connecting to the phone at the moment, I can not get it to show it as a device. It does make a beep noise when you connect/disconnect it so its doing something but Vista is just too much of a pain in the rear to deal with.
Its a good news that its not bicked so all hope is not lost.
What is the opinion on Tmobile WING!? any reviews should I get that phone instead?
BTW where do I find these G4 Safe ROMS? and how do I tell if they have the IPL/SPL in them? Do I need to hack them to tell?
And is Soft or Hard recommended?
YUP ! sure vista is still not compatible for flashing,WinXP is highly recommended and trouble free.
All official stock roms are safe to flash both the devices G3 or G4,secondly,all the latest custom build wm6 or wm6.1 are safe for both the devices,as they don't include any IPL/SPL in them.
If you plan to flash many roms,than 'HardSPL' is recommended,coz its done only once and the device remains semi_Cid unlock untill you personally remove HardSPL,but with SoftSPL,its done everytime you want to flash a new rom,choice is all yours,how you want to go about it.
I have shaps 7.1
and i'm trying to flash hard-spl 4.7 and the screen turns black and I get 260 errors and 202's and **** saying it lost sync connetion so please help me I gotta figure this out so I can upgrade. thank you.
[email protected]...
thank you!!!!
WTF????
Hard SPL comes in a few flavours, the most popular being Hard SPL v7 (2.10 olipro) and Hard SPL V9 (2.60 olipro). V9 is the developers SPl, good if you are making apps and roms but not so useful if you are just a layperson.
If you are trying to install Hard SPL 4.7 then I gotta believe its either a typo or you are trying to flash the wrong SPL for your device, the Hermes. Fastest way to a permanent brick I know...
If you want to Hard SPL your phone go to this thread - http://forum.xda-developers.com/showthread.php?t=296722
If you still have problems with sync errors then go to post 1160 on page 116 to find out how to use the SD card method.
Cheers...