Related
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click on the mrvanx guide at the bottom of my signature, it will tell you how to downgrade in the guides.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have been there mrvanx guide. but he don't have the solution to this problem. Just to downgrade the rom to wm5 not the SPL.
mysharif i think we have to shout again.
Help us anybody there we are stuck here.
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
You are great. I hope it will work for my Imate JasJam. Last night I was flashing my ROM with the original ROM but modified with NBH decomplie too by dutty. Before that I wrecked my device as I used the flashing of ROM using the latest sensation of loading the SSPL to RAM by des. That was my mistake that I used the original ROM. Then I removed the USB cable as it was taking too much time and because of danger to my imate I did that. Anyhow I got the NO GSM error but then I ran the Dutty's WM6v2 cooked ROM and it fixes all the things I am using it now.
The reason for my Imate JasJam degrade is my jog is not working according to its function. You know jumping from field to field. I didn't found any of that problem solution till the page of 30 in threads and posts. I am searching but if anybody knows the link. Kindly help me. So that I will save a trip to see the warranty people. (here we don't have ladies receptionists )
Sorry for the stupid question, how do I downgrade from Oli 2.10 to Oli 1.10
Il write a guide on it...too many PMs about this.
mysharif said:
HELP HELP
Hi All ..i'm totally lost here. I've tried to look for guideline to downgrade to original SPL 1.04 but i cudn't find any.I installed the latest m3100 unlock software v3a doing so my SPL is now version 1.4 Olipro. For warranty purposes how do I downgrade back to 1.04? I'm sorry this problem might have been addressed somewhere on the forum..if so cud someone provide the link to the thread on this. thank you so much.
Click to expand...
Click to collapse
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
aquasesh said:
I have the same problem. My touchscreen is dud and Softbank is very anal about the bootloader and warranty. im stuck with Olipro 2.10 and tried flashing the latest softbank rom. When i try via USB/Windows it gives me error 260.
Flashing with MicroSD works, but after a few attempts, its still Olipro bootloader...any ideas?
Click to expand...
Click to collapse
Ofcourse...because flashing an original RUU it doesnt recognise the new bootloader (Hence your 260 error), and HArdSPL doesnt allow itself to be overwritten by a retail RUU. IF you read through the HArdSPL threads you would know this.
mrvanx said:
OK guys the SPL downgrade can be done by downgrading to SPL 1.10.oli then flash any ROM with SPL 1.04 in it.
The only reason i can see that you wish to downgrade to 1.04 is because of a warranty issue. What is the problem with your devices??
Click to expand...
Click to collapse
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
GreatGrey said:
Hmmm, just yesterday (Thursday) I was asked by a VP at our company if that could be done. I was reluctant to say yes, but mrvanx comes thru with a fix.
The VP is in fact worried about having to return some devices to Vodafone, and he want to make them look "original" when they go back.
Click to expand...
Click to collapse
Just flash SPL 1.10.oli.......................then flash a vodaphone ROM, dont use 'force SSPL', just use autodetect.
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Pawel062 said:
well to get spl 1.04 all u have to do is take rom koch and the wm5 rom u are downgrading to. first downgrade os. then take that rom and using rom koch split it into parts and just take the spl and make it into a nbh and use the custom ruu on here. select force sspl and itll make ur spl 1.04. this is a quick guide and do this at own risk. using this method i got my first 8525 to aku 3.5 att and original spl. if marvanx comfirms i didnt make any mistakes i can make a new thread with pics and all so we cna add this to resources and stop the questions.
Click to expand...
Click to collapse
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
yea your right I just wanted to reduce your work load.
mrvanx said:
Or you could just wait until my guide is finished??
You dont need to use the rom koch ... duttys nbh tool is far more appropriate for this since we aint doing any cooking.
Click to expand...
Click to collapse
Hi mrvanx, some input to go into your guide (in case you havent come across this yet).
While flashing 1.10Oli under Vista, users may run into a problem where after loading SSPL and the phone goes into (SSPL) bootloader mode, the RUU program cannot detect the phone and returns an error.
This is due to the Vista drivers for HTC USB Sync. The driver needs to be manually "updated" just like in your Vista flashing guide. In this case, while the phone is in SSPL bootloader mode, go into device manager, replace the default HTC USB Sync driver with the USBAS one from your Vista flashing guide.
Then soft reset the phone, and try again. Worked for me.
For some reason, SSPL bootloader may appear as a different device to Windows than the hard/standard bootloader, so even if the Vista procedure has been performed before, it looks like it needs to be done also for SSPL.
Hello everyone, just a quick help please!
Bootloader is showing:
HERM300
IPL-1.04
HERM300
SPL-2.10.Olipro
Right now I have WM6 installed.
ROM version: 3.54.255.3
Radio version: 1.48.00.10
ExtROM version: 3.54.255.104
I want to downgrade for the selling purposes to:
HER_TMDE_1211113_1050200_GER_SHIP.exe (WM5)
Do I have to do anything else but just execute the exe and let it install? Could I brick it? (again)
Thanks a lot!
Kosta
The same to me!
Please help guys!!!It´s very important because warranty
90 reads, not even a thought from anyone??
Hi there,
i have upgraded several times WM6 and couple of times back to WM5 original, and WM5 cooked, i have not noticed any problem yet, but of course i did always the right thing, as ordered by upgrade....
Cheers,
Zs
Kosta88 said:
90 reads, not even a thought from anyone??
Click to expand...
Click to collapse
Extact your Official Rom and make a new nbh file with all SPL,IPL,PrimarySplash,SecondarySplash,OS,ExtRom,Radio and use the new Hermes RUU flasher choosing "Force Unsafe SPL"
With this way you will also Downgrade the Olipro SPL and the device will be like it was when you bought it. Exactly like Original.
But remember that there is always 0-1% something goes wrong. I have done this procedure 3 times with no problems at all
It doesn't have to be like when I bought it. It is not a must that I downgrade the bootloader...
Just, is the Olipro 2.10 bootloader going to work with WM5?
For selling purposes, the guy only wants it to have WM5 for some older programs (compatibility issues with WM6). Can I just install WM5 over WM6?
I think it can be done . Make the new nbh file I told you and choose Spl 2.10/2.30 (4th option) and flash
My Ameo has started to freeze at the loading screen just after the rom and radio version numbers disappear from the screen. Originally i was using AP5 and decided to downgrade to SPL 1.2 to try some other roms. I followed the procedure and flashed ap3 new and then ran SPL downgrader to try some other roms which seemed to work correctly. Unfortunately when flashing any SPL 1.2 rom the box gets to 100% and reboots as normal but i get the problem mentioned above. I have tried to search the forums for anything related to this and if I have missed anything I apologise. Im now without my beloved Ameo so thanks in advance for any assistance you can provide.
Did you remove your SD card? This will cause problems some times...
Just to add the IPL and SPL numbers on the bootloader
Just to add the IPL and SPL numbers on the bootloader are :
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
photon2 said:
Did you remove your SD card? This will cause problems some times...
Click to expand...
Click to collapse
Yes i have taken the SD card out and get the same problem.
Does no one else have any ideas?
Does no one else have any ideas? times are so hard now im having to use a Samsung E900 do you feel my pain...
Now you're on SPL 1.2, have you reflashed to a 1.2 ROM? AP3New is still 3.5. Boot into bootloader and give it a try.
I have tried all the ones i have found.
Currently i have t-mobile WM6 rom from their website flashed but I have also tried IRUS Vanilla Rom, Sogarth Base Rom 1.2 and well all of them I could find for 1.2 but all freeze at the same point when resetting (albeit with different bootscreens). As you would guess im desperate, I would guess that when downgrading to SPL1.2 its gone wrong somewhere. Does anyone know of a way to update the SPL back to 3.2 from the bootloader as thats the only way i can get a connection to my phone from my pc.
Thanks for your replies so far.
Sorry i meant SPL3.5
I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
dosada said:
I have got here an athena with AP 4.0 Rom. I am tryong to install the german tmobile stock rom. When i do this i get the error message "Found SPL v1.20" and "Download SPL before v3,03 is not allowed". I have found the SPL downgrader but this does not help me either. Is there anything i can do to fix this problem?
Thanks a lot!
Click to expand...
Click to collapse
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Hello,
yes, this is the ROM i am trying to flash onto my Athena but it ends with the error message. Not to sure how to fix this. As i said i have tried the spl downloader but this did not work either. Any ideas what else to try?
I have just had a look and the Athena shows SPL as 3.5 No idea how to check which version the Rom is. Any ideas what to do to get it to run?
lakeman said:
Did you try this rom
http://rapidshare.com/files/73352583/Athena_WM6_TMD_2.35.111.3_By_Agent_Bignose.zip
from the wiki
here http://wiki.xda-developers.com/index.php?pagename=Athena_WM6Upgrades
it sounds like the file you are trying to load is an SPL 3.5 version
Click to expand...
Click to collapse
OK , I think I had it back to front.(might be your language skills)
so!
You have AP4 SPL 3.5 !
In this case the downgrader should have worked if you followed the instructions on this page
http://forum.xda-developers.com/showthread.php?t=405604
I have done this and can vouch it worked.
Alternatively on this page http://forum.xda-developers.com/showthread.php?t=397518
there are a couple of german roms or you could try and alter Michys multilanguage rom
Hey guys, need a little help here, i'm using a dopod 838 pro and using CRCs 13.3 rom here, how do I flash hard sspl into it? thks...
download it here: Hard-SPL-V7.zip
It's located at the top of this section of the forum. http://forum.xda-developers.com/showthread.php?t=296722
It installs basically just like flashing a rom. run the RUUwrapper.exe just like you did when you flashed crc's
Or use the instructions on page 116, post 1160 to flash via sd card. Just remember the sd card has to be 2Gb or less and formatted FAT32.
Cheers...
warrenlee713 said:
Hey guys, need a little help here, i'm using a dopod 838 pro and using CRCs 13.3 rom here, how do I flash hard sspl into it? thks...
Click to expand...
Click to collapse
i have this problem too, each time i flash my dopod with any HARD SPL it alway get stucked after entering bootloader screen, the USB Hub automatically closed.
somebody please help me!!!!
mine is dopod 838 i-mate JASJAM from Dubai, with SPL 2.03
recomend me if u know any ROM suitable for it to be flashed.
my Jasjam has problem too!
it's has bootloader 2.03 and i can not HSPL for it. now it's startup into splash screen and stuck!!!!!
what is your bootloader version? IPL-1.01 or else?
coz, i've just successfully changed my SPL-2.03 to SPL-2.60. olipro, further i have successfully cooced my ROM to WinMo 6.1 Black Satin.
try to flash your bootloader with Hard SPL v9, and i assure u will get what u want,