hello everybody, i am new in this stuff of PDA, and i have a problem hope you can help me please,my problem is that i do all steps in the manual for upgrade the ROM of my ppc6800 (DCD 3.2.4) and work fine, but when i try to activate my acount, specific when change the MSID send me "error writting MSID" and not update the mobile number and can´t make a call, what i can do? help please.
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
Hi folks.
I was trying to update to rom from DCS.
The problem is that, in last update [to 1.72], i surely have made something wrong cause, right now, my operator is O2!!!
Don't know how this happens, but until now the phone is still working....
The question is, to upgrade to Win2003SE, how can i, FIRST, change the operator ID, so when installing Win2003SE, the operator should stay the first one of all, wich was Qtek?
Much thanks to anyone who reply to this.
More trouble coming. After trying with the operator id set to O2, bootloader told me there was an error with id country...
NOW i'm very confused. Getdecivedata gave me O2. Have changed the files to O2, because before i'd changed to Qtek.
The XDA entered in update function, then the error again, and now nothing on screen...
:shock: :shock:
What should i do?
Now my "thing" is stucked at
SERIAL
v1.06
Nothing works... have tooked out battery and nothing.
Can someone help?
Well after some search i've found some old help from edsub!!!
But still want to know how to change operator id after this upgrade.
:shock:
For those of you who don't mind helping a noob
Some background info:
I own a german version of MDA vario2. I did unlock it using the hack from one of the commercial site http://www.imei-check.co.uk/. With some blind courage, I upgraded my rom to O2 (german) successfully yesterday. But that was before I learn about this site.
1) Now I'm trying to upgrade it to WM6 using the official HTC rom posted on this website (version 3.something). The process goes until the step where the rom will be upgraded. A window shows percentage bar comes up (0%) and then after a while, I get an error message 260 Connection (even though the device connected to activesync fine previously). The percentage number stays at 0%. Then the upgrade process ends. I tried many times but always get the same result. What have I done wrong? Hopefully I did not trash my device because of the O2 upgrade.
2) The reason I upgraded to O2 was because I messed up my MMS settings somehow. I thought I could upgrade to O2 and then change the MMS configuration manually t-mobile's config. But after the upgrade, MMS functionality disappears from the messaging program. (MMS disappears from the tree structure.. leaving on SMS and Email.) Does anybody know how can I add the MMS functionality back?
3) What is CID unlock and SuperCID? Does it have anything to do with my problem in (1)??? How to do it?
4) Where can I get buildos.exe and createrom.bat for the rom kitchen?
thanx any info you could provide.
Hi to all owner of eMobile eMonster Lite S12HT and other visitors! I need your help. My device is the same S12HT, but while flashing it with different radios, SIM and CID unlocking, etc procedures, I wrecked my radio. Now my device doesn't register on carrier's network, sometimes "No service" and "Searching for network....". Nike radios from other non-S12HT devices can't help me. Now my device even has name Niki100 instead of Niki500 as it was out of box. To restore Nike I need to get correct radio from S12HT.
Can someone help me?
If you enought experienced here's the info how to dump radio.
If you dont know what to with all of that info, but still want to help me, I can provide you step-by-step realtime help thru IM or any other way.
So If someone can help me, please read HowTo from link above, or write down this thread.
same problem
Did you solve your problem?
I have s12ht with no gsm network. Did you find dumped radio rom?
thanks
Update: I just found that s12ht works on 1.7Ghz W-CDMA only. Too sad!!!!
Still looking for working s12ht
Problem to enter download mode.
I have tried to dump Radio ROM with no success. I can`t enter into download mode. What should I do?
However, I`ve dumped other ROMs except Radio Rom. Please check at http://www.sendspace.com/file/9g8tbk.
I didn`t have time to prepare nbh file. I am not expert for that. If you so, share your experience.
Thanks.
you need hardspl 1.15mfg for adv. rtask commands!
biligee said:
I have tried to dump Radio ROM with no success. I can`t enter into download mode. What should I do?
However, I`ve dumped other ROMs except Radio Rom. Please check at http://www.sendspace.com/file/9g8tbk.
I didn`t have time to prepare nbh file. I am not expert for that. If you so, share your experience.
Thanks.
Click to expand...
Click to collapse
If need, I can help thru PM or ICQ step-by-step.
Already 1.15MFG
Already flashed 1.15mfg. I can test rtask. But QPST status was non download mode.
have you connect the diag com port?
biligee said:
Already flashed 1.15mfg. I can test rtask. But QPST status was non download mode.
Click to expand...
Click to collapse
To connect QPST Memory Debug you should use QPST Configuration utility to select right COM port. To select COM port force S12HT to radio bootloader mode, connect it to PC, open Device Manager in Computer Management, select Ports (COM & LPT) and you'll see there Qualcomm Diagnostics Interface with right COM port. That number of COM you should use in Configuration and after that Memory Debug will work ok.
Any problems write down here, we'll help.
PS: Is your radio from normal working S12HT?
i need a dump too ^_^
Is there any progress while dumping S12HT?
any good news guys???
KiLLWarez said:
Hi to all owner of eMobile eMonster Lite S12HT and other visitors! I need your help. My device is the same S12HT, but while flashing it with different radios, SIM and CID unlocking, etc procedures, I wrecked my radio. Now my device doesn't register on carrier's network, sometimes "No service" and "Searching for network....". Nike radios from other non-S12HT devices can't help me. Now my device even has name Niki100 instead of Niki500 as it was out of box. To restore Nike I need to get correct radio from S12HT.
Can someone help me?
If you enought experienced here's the info how to dump radio.
If you dont know what to with all of that info, but still want to help me, I can provide you step-by-step realtime help thru IM or any other way.
So If someone can help me, please read HowTo from link above, or write down this thread.
Click to expand...
Click to collapse
Hi mate i have same problem with S12HT after unlocked and language chane NOSERVICE please help me
THANKS
here's whats up... first of all... I want to thank everyone here for their amazing info and files. these last few days have been a real eye opener for me to look and learn new things. that being said....
I have a uscc 6800. I upgraded to nue spl 2.47 then to radio 3.42.5 then went to dcd 3.3.4 as i had read it was stable and opperating well. I think thats where i goofed. I allowed it to set up its own settings then I ran the uscc carrier cab.
I have no internet. my #777 says I need a valad password and username but had never had one before. my fiance's phone doesnt need one... (I'm not touching hers at this point in time)
any thing... any help.... any hints tips etc. PLZ
ok. i think i get it now.
here is the biggest issue I have.... I have checked epst and it appears to all be the same. was there some step I missed... is there some fix I'm not finding or am I just screwed?
With USCC I have always found it best to use QPST to backup and restore the phone's programming before/after flashing. Then there is only 1 thing that has to be edited in EPST when it's all said and done.
What kind of phone is your GF's? The same model?
If so you can use QPST to read her phone's programming and update the MSID/Phone # info and write it to your phone and it should work.
QPST info is not the same as EPST info, they do have some cross over but both also contain unique info and when you upgrade to a v3.x radio, it trashed alot of the settings in QPST, which is why it's best to back it up first.
BTC
This sounds like something I've done in the past, but not with USCC. I had flashed a dcd ROM and then installed a carrier cab, but it continued to ask for a valid username or password. There are a couple of things you can do. First, do a hard reset of the device, then install your carrier cab. AS SOON AS installation completes, soft reset the device. If your connection is still not working, go to Settings>Connections>Connections and try to configure or set up a new modem connection. You will have to enter in the username and password for USCC internet. This information can easily be found in EPST also.
thanks for the help guys
I appreciate every thing u guys suggested but had failed to report back that I had fixed it... infact my gf's phone was the same and I did go back and compare the two epst's and had found that a 2 had changed to a 1. changed that back and got my svcs back. I have however been looking for the qpst that everyone is speaking of but am at a loss as to where it is... any help?
QPST is available on the internets, somewhere. Do a Google search, I doubt it'd be safe for anyone to actually post that file on here. But you'll need to put the device in diagnostics mode to use QPST and also will need the modem drivers.
I'm sure if you search the XDA forums you'll find something