I installed SoftMaker Office in AP 4.0. When I try to run it, I get an error screen asking to send crash information to Microsoft. It worked fine in the original X7501 ROM, so I'm not sure what's up.
Is anyone else using this product? If so, is there a fix or workaround for this crash?
Thanks in advance!
_______________________
Floyd --> HTC Advantage X7501 -- AP 4.0 Platinum, Radio 1.58
((WOW! What a difference from the original ROM and radio!!))
Addie's got a 16G SD card full of Rhapsody and ripped music, and a hard drive
full of movies and TV shows from my TiVos and DVD Catalyst 3 (to keep me
entertained all the time -- when I'm not doing my homework, that is!)
no error with Softmaker Office
HI
i am using Softmaker Office 2008 with x7501. Also AP 4.0 Platinium and radio 1.5.0
There are absolutely no errors with this software.
Which version of Softmaker that u are using (I tested Softmaker 2006 also, without errors)
Try to change your VGA mode (I have no errors with even 96,128 or 196 dpi)
enjoy
Thanks for the info
I'm using the new update (Office 2008 with the 494 service pack) and radio 1.58. I see you're using radio 1.57. Wonder if that could be the difference?
I'll reflash the ROM today to get a fresh start and install SoftMaker first, then the other stuff I added (like PocketInformant, Resco Radio, and so on) to see if that makes a difference.
Thanks for the reply!
_______________________
Floyd --> HTC Advantage X7501 -- AP 4.0 Platinum, Radio 1.58
((WOW! What a difference from the original ROM and radio!!))
Addie's got a 16G SD card full of Rhapsody and ripped music, and a hard drive
full of movies and TV shows from my TiVos and DVD Catalyst 3 (to keep me
entertained all the time -- when I'm not doing my homework, that is!)
I also try to test with Radio 1.58. No problem.
As u said. I tried to update to Radio 1.58.
There are still no problem here.
Tried Clearing Memory and Re-Installing
Thanks for the test!
I did a "Clear Storage" function and started again.
I tried to install SoftMaker and as soon as the setup tried to connect to the X7501, I got an error message that said "Invalid CPU = 0".
I'll send this to SoftMaker and see if they've seen this message before.....
_______________________
Floyd --> HTC Advantage X7501 -- AP 4.0 Platinum, Radio 1.58
((WOW! What a difference from the original ROM and radio!!))
Addie's got a 16G SD card full of Rhapsody and ripped music, and a hard drive
full of movies and TV shows from my TiVos and DVD Catalyst 3 (to keep me
entertained all the time -- when I'm not doing my homework, that is!)
Edit/Delete Message
FloydW said:
Thanks for the test!
I did a "Clear Storage" function and started again.
I tried to install SoftMaker and as soon as the setup tried to connect to the X7501, I got an error message that said "Invalid CPU = 0".
I'll send this to SoftMaker and see if they've seen this message before.....
Click to expand...
Click to collapse
Do be advised to install Softmaker - at least for the older Planmaker versions - you had to be in PORTRAIT mode as the installer doesn't like the Advantages landscape mode for some reason
FWIW, i am using Softmaker Office 2008 with X7501 with AP 4.0 Platinum and radio 1.5.8...works fine for me...installed in landscape mode...
Related
Ok gang i have been lurking around for a while and im finally deciding to upgrade my phone. for my short background, i have done this on my old magician (once) and a friends t-mobile magician (once) as well, but now i want all the new gadgets and speed for my hermes. for the record i am currently a Cingular/ATT customer living in Orlando, FL where there is great 3G coverage.
here is what i have:
herm100
ipl 1.01
spl 1.06
ROM version 1.34.502.1
ROM date 09/21/06
Radio version 1.16.00.00
Protocol version 32.53.70.18.01H (i am not sure what this one means though...)
here is what i am planning to do (in the exact order of which i will run them so if my order isnt right please tell me):
HTC_Hermes_SIM_CID_Unlock_v3a
Hard-SPL-V7.rar package
HERM_Radinly_1.43.00.00_CustomRUU.rar (unless anyone thinks the 46 or 47 version would be better for ATT in my area)
Hermes_WM6_WWE_vp3G_v2.0_ATT.rar
CVSD_1.2_061226.rar
HomePlugIn_1.6.0.0.rar
vp3G_v2.0_CommManager.rar *edit* (yes i know the comm manager must be closed for this one too) *edit*
vp3G_v2.0_StreamingMedia_PATCH.rar
XM_Radio.rar (may install this later)
MobiTV .rar (may install this later)
TCPMP_v0.72RC1.exe
ac3.plugin.0.72RC1.rar
flac.plugin.0.72RC1.rar
ffmpeg.plugin.0.72RC1.rar
vorbislq.plugin.0.72RC1.rar
and that should be it i hope!!!! also, i think i remember needing a codec to play xvids through tcpmp but i cannot find anything that i have archived on my computer... so if anyone has that please let me know.
if there are any other precautionary measures that i can take PLEASE let me know. i 'somewhat' understand how the hardspl works, is that the only protection i have? should i clear up my phones memory? i doubt there is anything like a 'scandisk' or anything for the type of memory the phone uses but i just want to be 1000000% sure that this flash will be successful thats all. thanks guys up front for a great community and any help is GREATLY appreciated.
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Madcap180 said:
yeah, do HardSPLv7 first... Then do the Unlocker... then do whatever you want.
Click to expand...
Click to collapse
No do the unlocker first...it loads HardSPL (1.40.oli) onto the device....it will downgrade the SPL if you run it second.
Once that is done...load HardSPLv7 onto it.
Then follow the list you said.
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
beppomarx said:
great!! i just wanted to verify that my particular build (i know there are herm100, 200 and 300 now) would fit the bill.
few more quick q's...
if i ever wish to, can this phone be put back to factory settings and be completely untraceable, or am i making permanent changes to the spl?
also as far as i am aware, overclocking is not available (hopefully i can use the word 'yet' here ) for my device is this correct?
lastly- without outlook (on my computer), is there any way to back up my contacts. not just the sim card, i mean email addresses and everything? i am sure there are some encrypted files somewhere on the device that i can just manually copy and paste when i am done.
and after that, ill be flashing it all over and post the results.. and thanks both of you for the quick responses!!! i will do the unlocker first, thanks for deterring me from that hiccup
Click to expand...
Click to collapse
OK.....i will answer these qs but you do need to read the wiki so you DEFINATLY understand the different aspects of the hermes...
The device can be downgraded to normal (like factory settings)....see the guides in my sig for more info.
Overclocking....dont even bother...the restriction is in the ROM....later ROMs use the cpu much better.
If you want to backup contacts etc...either use PIMBackup (search this forum for it) or get an exchange account which will sync contacts/emails/tasks etc..
the IPL is still 1.01, can this be upgraded or does it not make a difference?
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
beppomarx said:
ok i am trying to run Hard-SPL-V7...
when i run the file 'RUUWrapper' on my mobile device i get this message:
"File or assembly nme 'System, Version 2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089,' or one of its dependancies, was not found."
I just installed microsoft.net framework 2.0
from what the previous screens told me, the SIM and CID unlock was successful and my current IPL is 1.4 from using the programs in 'HTC_Hermes_SIM_CID_Unlock_v3a.rar'
please help!!!!!
**edit**
Sorry, that is when i try to run it from the phone itself. when i run it on the computer it says 'The application failed to initialize properly (0xc0000135). Click on OK to terminate the application.
Click to expand...
Click to collapse
You need to install ALL the latest .net framework packages from Microsoft on your PC, the file is meant to run on your pc NOT your hermes.
you guys are the best and so is this site!!!
last question...
i downloaded the 'vp3G's WM6 v2.0' ROM and added the patch for 'vp3G_v2.0_StreamingMedia_PATCH.cab ' but i still cannot watch videos on youtube or any site of the likes? the page gives me an error saying 'Hello, you either have Javascript turned off or an old version of Macromedia's Flash Player. Get the latest Flash player.'
i cannot find java or macromedia that works on windows mobile... what can i use??? i am finding some stuff on javaME but nothing i can comprehend or download...
lol, when I tried to do the Unlocker first it temp-bricked my phone.. I had to reflash old rom, then run hardspl then the unlocker in that order.
Use google and search for 'Flash Player for Pocket PC'
it will give you the link to Adobe Flash Player
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Mines set up as:
Other NMEA GPS reciever
GPS Baud Rate 57600
Com 4
and Tomtom 6 works perfectly.
I had to use the tomtom 6 patch listed in an earlier post as my tomtom wouldn't work under Win Mobile 6, have you had to do the same.
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Optika said:
It takes 5 to 10 minutes to find GPS signal some times (spesialy for the first time)
On some ROM versions it is immidiate. experiment...
My Com port is 0, but before i pair it with my HTC.
I use original Tom-Tom GPS
Click to expand...
Click to collapse
Excuse me, but I'm a bit confused...what exactly are you pairing with the HTC? The GPS?
Why are you using external BT GPS instead of the internal one? is it due to low satellite reception?...cause I do this as well, since I have sun shields on my car, and the BT GPS is placed on the shield on a clear location where the reception is much better.
The internal is mapped to Port 4, but actually it is on Port 5.
cheers thanks. works great now
i havent had to update tomtom at all yet, but im not using a particularly kosher version *ahem* (although i do have a tomtom 6 lisence, just not for the maps im using)
If you run QUICK GPS BEFORE opening tomtom it finds the satellites pretty fast (at least for me). If I do not run it tomtom takes a long time to locate the satellites.
mcwtrekkie said:
Hi, Ive just installed TomTom 6.010 on WM6, but I can never get a GPS signal.
If I go to configure my GPS device in TOMTOM, which type of receiver do I select? The NMEA GPS? (I'm assuming this is COM5:9600, too)
Please help lol
Click to expand...
Click to collapse
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
I agree - it is much more reliable like that.
walshieau said:
you should be using the update 6.030 for TomTom 6 with devices with internal GPS
Click to expand...
Click to collapse
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
doncsunny said:
?? well i have 6.0.10 and it works beside the fact that the menu is not visible (but clicking opens the settings box etc).
The main question i have:
How can i add an additional map manually? I have GB + major roads of WE. I have France maps. Just copying is not enough... so what else can i do?
Click to expand...
Click to collapse
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Location of TomTom 6.x patch for Windows Mobile 6?
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
[email protected] said:
A search of this forum does not seem to reveal the location of the latest TomTom Navigator 6.x patch that allows said software that I just purchased to run on my newly purchased x7501, which has the Windows Mobile 6 2.19 ROM code flashed.
What / where is the latest TomTom 6.x patch?
Is there a later, proven, "better" 2.x WM6 ROM available?
Alternately, what tools are used to develop the ROM flash code and application patches?
Thanks,
Tom
Click to expand...
Click to collapse
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
ltxda said:
If you're looking for tools there is a section within the forum for this and you can also check multiple Wiki pages.
TomTom 6.x works well on my Athena running WM6. Never had to install a patch to get it to work.
Click to expand...
Click to collapse
To add to that, I normally do not do any settings. I just install after every flash and start the program and leave device near my window and go off to have a coffee. After several minutes it sees the sats, and maps etc. That is it. The rest is automatic the next time I start and goes faster.
Alway s have the maps and voices folders installed (copied) to card.
apd said:
You should only have to copy the map subdirectory (probably called France for this map) into the root of your SD card and Tomtom will be able to find it.
Click to expand...
Click to collapse
if i don´t have sd card the tomtom 6.030 don´t works ??? i installed on microdrive but don´t find the maps ???? any idea??? thanks
Its cause your copy of TT6 (6030) isn't correctly hacked to allow the use of the maps you have.. Try another mod/hack
No success
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Someone has another version here. You need legal maps to use
http://forum.xda-developers.com/showthread.php?t=322243
[email protected] said:
I am having no success installing TomTom Navigator HOME 6.010 on my x7501, which has the 2.19 WM6 ROM flash.
I have unsuccessfully tried twiddling the user interface settings that seem as if they may affect the outcome.
When executed on a laptop running Vista, without WM5torage, the installation program does not recognize the x7501 as a valid installation location. Attempting installation while running WM5torage 1.75 causes a WM5torage hang and the x7501 needs a reset to connect to a laptop running Vista, and results in a "<file name> not found" error message after WM5torage ceases functioning. One file might get copied, most often none get copied successfully.
Installing from various locations and combinations with the ppc cab file results in a "Installation of <cab file> failed" message, to the system, microdrive and/or the 4GB microSDHC card.
Though new to the xda and mobile device space, I am reasonably experienced otherwise. As painful as this might be for both of us, please tell me, step by step, how you successfully installed TomTom Navigator HOME 6.010 onto your x7501. Please do not assume anything, as I have likely missed something simple. I would need to know the versions of software used, e.g. ROM, WM5torage, Navigator.
According to the TomTom web site, Navigator 6 on WM6 is not supported.
Thank you,
Tom
Click to expand...
Click to collapse
I had a similar problem installing the retail/downloaded copy of TomTom onto my device. I called TomTom support and they couldn't figure it out. I eventually figured out where the installation files were, extracted them and moved them over to my SD card. Then I installed them from there without any problem. I asked tech support to document the procedure I implemented to get this done in case they have other people with the same problem. Hope this helps. I'm slammed with work now or else I would look to see which files I used and post the info. I'm sure if you're familiar with installing CABs from the device you'll be able to tinker around a bit and find them. One thing I remember is that I had to extract the CAB on the CD or DVD before I was able to access the actual installation files. The first CAB is the archive and the CABs inside the archive are the installation files.
6.030 officially out-
Actually, Tomtom has officially released this update...
http://www.tomtom.com/support/product.php?ID=1401&Language=4&query=update&FID=6814
Basically, d/l the latest version of TT Home, insert your mem card or connect the device (mem card only 4 Vista), and click the D/L button on the above page.
Then follow the instructions. If it doesn't install, then you can manually pull the
cab file from:
(C:\Users\XXXX\Documents\TomTom\HOME\Downloads).
Then open with Winrar, and extract the ttn.cab file located in the 2577 folder.
Transfer to the card/device, run it, and you should be good to go.
Last note: Palm has an official update available on their site here:
http://www.palm.com/us/support/downloads/gps_nav.html
which appears to be the same exact file (same size).
Hope that helps...
hey guys i just want to copy the tomtom map to the microdrive via activesync but when trying to copy cline.dat i have an error what can i do to copy this file to the microdrive?
I'm using an Athena (got it 2 days ago) with AP4.0
I had the wifi problem and solved it by myself with cmonex instructions.
I couldn't find a solution for the new problem I have: in USB to PC I select "As a Storage Device" and when I plug my Athena to my PC, the miniSD is connected as a Mass storage device.
I would like to use the Microdrive as a mass storage device.
How could I change this ?
If I remove the miniSD, there is no mass storage device that pops up on the pc.
benoitb85 said:
I'm using an Athena (got it 2 days ago) with AP4.0
I had the wifi problem and solved it by myself with cmonex instructions.
I couldn't find a solution for the new problem I have: in USB to PC I select "As a Storage Device" and when I plug my Athena to my PC, the miniSD is connected as a Mass storage device.
I would like to use the Microdrive as a mass storage device.
How could I change this ?
If I remove the miniSD, there is no mass storage device that pops up on the pc.
Click to expand...
Click to collapse
I don't know if USB to PC has that option, but I do know WM5torage has the option that allows you to select the Microdrive. I know it isn't exactly what you are looking for, but you might give it a shot and see if it scratches your itch.
http://forum.xda-developers.com/showthread.php?t=349143
Thanks ! I just tested and it's working fine !
Well, for the beauty of finding a solution, you can still help me with the usbtopc program but I consider the wm5storage as an excellent solution !
edit: well actually WM5storage is giving me some trouble. I can't copy big files (350 Mo) directly and the device appears as empty on the computer after a failed transfer of one of those big files...
edit2: the solution might be there, I'll report after testing. http://forum.xda-developers.com/showpost.php?p=2176131&postcount=3
edit3: it's getting worse... activesync doesn't work anymore. My Usbtopc is switched back to activesync and I get an "attention required" message in activesync :
"Connection not valid: Cannot open the connection "57600 Default". This connection is no longer valid or does not exist. Select a different conenction and try again."
However in the options, the selected and only choice is USB.
Am I screwed ? Should I reflash the ROM ?
Once I sort this ActiveSync/USBToPc thing, I still have the will to have the french keyboard layout (I don't care about the OS language but I do about the hard keyboard layout).
If I reflash, should I choose :
- 5-21-08 UPDATE!! AP4 VANILLA 4 SPL1.2 Windows Mobile 6.1 for spl 1.2 and 3.5 http://forum.xda-developers.com/showthread.php?p=2176131#post2176131
- HTC French WM6 ROM SPL 3.5 - http://www.megaupload.com/?d=9Y2SRNVN (from the same page)
- Athena Project Official ROM and SPL 3.5 upgrade - The Final Release http://forum.xda-developers.com/showthread.php?t=387409
What's the difference between the 1st and the 3rd ? I use the 3rd, would it be better to flash the 1st ?
The 2nd is an official rom ? It's more stable ? Is it still WM6.1 ?
Thanks and sorry for being such a noob, I was using a Trinity before and the Athena is more complex on many aspects.
I will suggest to flash AP4 to have SPL 3.5, then upgrade to the latest Michy 6.0 if you like the manila 2d interface, or MICHY 5.1 to have a fast and stable, full optional, ROM .
I've tested ALL ROMs here, and My athena is almost perfect in the 5.1, SPL 3.5, Michy's ROM
Damn, sorry my suggestion messed up your ActiveSync. I have never had that problem with WM5torage...
Anyway, I have two suggestions:
1) I recommend flashing only as a last resort. Everyone here is really helpful, but there is always a small chance that you will brick your machine in the process. Try other things first - uninstall WM5torage and softreset; or even a hardrest. If you flash with a different ROM you will lose your hardware keyboard settings.
2) If you do flash, I suggest you make a note of your hardware keyboard registry settings. Then after you flash you can reset them. I searched a little for information on where they may be, but I can't seem to find much.
I speak from experience. I flashed and lost my hardware keyboard settings (Japanese). Luckily, I hate my hardware keyboard and never used it anyway.
As far as ROMs, Sergiopi is right. 3.5 to AP4, then Michy's. Personally, I use 4.1. Both 4.1 and 5.1 are almost completely bug-free, stocked with useful software, and super-fast. I turn off sounds for events, turn off all today screen items, and almost every button I press gives smooth, instantaneous results.
Thanks for your help, I flashed Michy 5.1 and I have to say it seems to be a good rom !
I could chose the french hardware keyboard layout with an embedded utility.
Still have some wifi issues (not the same so it might be my personnal network) and I mistakenly sync'ed my windows live contacts with my outlook contacts which is annoying.
Anyway, thank you !
Based on helloworld1's Jade ROM (LINK) I made an ROM with more of the HTC Jade software.
Since the HTC Jade had an bigger ROM memory than the HP iPAQ RW68xx i have made CAB files of the software to install ftom the SD card automatically, it is software witch is useful but not so hard needed. So after a hard reset orso you can use the device but you need te reinstall the rest of the software.
When you had tried the ROM by helloworld1 before you can see that it is just an Minilla 2D ROM but i wanted to go a step further so here it is...
The difference between the RW6815 and RW6828 download are not more than that the RW6815 use the HP camera app and have no radio software in the ROM and the RW6828 has the O2 camera app and radio software.
How to install?
1. Download the right ZIP for your phone.
2. unpack all the content of the ZIP (the nb0 file and the 2577 folder) to the root of an FAT32 formatted MiniSD card.
3. put the SD card in you RW68xx
4. press the two softkey buttons (the keys with the "-" symbol) and the reset buton, don't unpress before you see a white screen with the HP logo in the center
5. wait for 12 minutes.
6. now your phone is resetting to factory defaults and you can now do the things you will allways do with a Windows mobile phone like calibrate the screen...
7. the HTC autostart software will start and install some program shortcuts and other stuff and afterward it will reset the device. let the phone do its thing...
8. The last step is to start the autorun from the SD card to install the last pieces of software. It will start and install automatically and afterwards (about 4 minutes or so) you will be asked to reset the device, choose yes. You can underwhile reset your device and work with it. It will install in the backgroud (it is possible you think that the system feelf not so stable, the best is just to leave it)
9. Now you can use your device and use the advantage of the HTC software.
if you want to pre install some software of you own choice to the device add them to the INSTALL folder... See the subfoldernames and the items in that folders to see how it works (hint: the folders with the prefix "my" are installed silently)
Download
Version 02
HP RW6815 - 15M2D02 - [email protected]
HP RW6828 - 28M2D02 - [email protected]
Version 01
HP RW6815 - 15M2D01 - [email protected]
HP RW6828 - 28M2D01 - [email protected]
Just in case: My MediaFire directory
If you find any bugs or you have some ideas post them please.
ToDo list for next releases:
Code:
Make speakerphone button to work while calling
Remake the HP animated splash screen
Make camera and video link work in TouchFlo Photos and Videos tab
Change HTC opera splash screens to HP
Remove HP Photosmart (image viewer) (RW6815)
fix the file extensions for images and photos to HTC Album
a none realistic branwave (I think), make HTC camera app work for RW68xx
Bugs found:
Code:
for RW6815: zooming with camera causing strange screen.
playing video with the HTC Album software is not OK (press hang-up key to go back to the main screen)
Video rotation in HTC Album is wrong
Cannot chage backlight with the HTC Power program, use old Backlight software witch is present
Clear Storage (HTC software) doesn't work
Greetings,
Michel
P.S. You can donate me for the effort i put in this ROM via THIS link. If you donate you support me in making it a better ROM.
placeholder...
placeholder number 2...
Version 2 is almost uploaded (RW6815 is finnished, RW6828 is uploading and you can find him later on in my MediaFire folder or tomorrow with an direct link in the start post).
changes:
changed some of the HTC logo's for HP logo's (the splash screen is a new old style HP animated logo)
added some extra OEM packages of the HTC JADE
removed the HTC keyboard from the ROM and repacked it in a CAB
did a remake of the autorun for the CAB and REG files. You can now reset your device while the software is installing, it will go further where it was ended.
Some small cosmetic things (Youtube shortcut was not working on the programs tab on TouchFlo)
thanks alot i started to use.seems everything ok.looking very good mate good job
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
devilunix said:
when got any notification touch flo is disabled.it auto launchs or says tap here to launch.
Click to expand...
Click to collapse
The RW68xx is sometimes a bit low at RAM so the HTC software stops Manilla so u can use other software without problem. I don't think there is any solution for
thanks anyway ill try also version 1
Thanks for this rom, downloading now. been trying some other roms but i've got camera problem hope this will work.
thanksssssssssssssssssssssssssssssssssssssssssssss sssssssssss
thankssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Is there a way to root this rom without using miniSD card??
Rom OK but WiFi not working
I have flashed thi rom on my HP 6815, and looks great, but WiFi does not work.
launching HP asset manager The Wireless LAN section reports:
Driver REV: N/A
Firmware Ver: N/A
Hardware Rev: 1.0
IP Address: N/A
Mac Address: N/A
Radio present. Yes
I belive there is something wrong in the wifi radio firmware (different hardware revision?)
Please help me
Thank you
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
kemoba said:
I copy all the files to root of my SD card... But when i reset my rw6815 to that hp logo in the middle, it passes about 5-6 minutes then my HP just resets it self but no ROM rooted to it just that ougly WM5.0
Click to expand...
Click to collapse
i am truing manu rooms , but result is always the same
Phone is off , on settings have mesage : ¨wireless radio must be attached to use the phone ¨
Please help !
Thanks in advance
[Q] TomTom Navigator "You have an invalid version of the TomTom application"
Does anyone know WHICH build of TomTom is the "correct" one for the HTC HD2 (or HTC Leo as TomTom sees it)?
I have;
ApplicationVersion=7916
ApplicationBuildNumber=9189
and have tried many others, and whilst they work perfectly on the HD2, TomTom Home simply won't accept any of them as valid.
Hope someone can help!
Grey Area said:
Does anyone know WHICH build of TomTom is the "correct" one for the HTC HD2 (or HTC Leo as TomTom sees it)?
I have;
ApplicationVersion=7916
ApplicationBuildNumber=9189
and have tried many others, and whilst they work perfectly on the HD2, TomTom Home simply won't accept any of them as valid.
Hope someone can help!
Click to expand...
Click to collapse
This version does work good on my HD2...
For TT Home extract and replace file in attachement on your phone
OK...little confused...on my phone or in TT Home on PC? I already tried a new mobile.ddf file in my Home/Resources folder, but it didn't solve the problem.
Copy ddf file in PC folder "Program Files\TomTom HOME 2\Resources\Devices".
Enable Map share in TT in phone.
For me it does work without problems.
Unfortunately not for me. Mind you I think I have device code problems too - when i first installed TomTom Home it worked okay, but now even though I am using the same device I am getting a different serial number - but only very slightly different (it's exactly the same 32-character code, but the one that my account has registered has a "T" in front of it and lower case letters instead of uppercase).
TomTom of course has their stupid "one change in 6 months" rule, so I guess I just have to wait...
TomTom supposedly unlocked my account, but I still can't update it with the new device serial number.
Anyone got any other ideas on how to get aroudn this problem?
Thanks!
Do you have Tomtom installed to your device and not the SD card. I had the same problem untill I reinstalled the Tomtom app to the device, but left the zip folder, voices folder,art folder, and map folder on the SD card. Now Tomtom home works perfectly with my HD2.
Using Tomtom app 7.918 (9193) with latest 860.312 Western Europe map
*EDIT* Yes it WAS worth a try - R12SRW you are a genius...haven't tried to see if EVERYTHING works yet, but at least the stupid error message hasn't appeared.
*EDIT #2" Seems faultless now - MapShare and speed camera updates automatically found and downloaded...thanks again!
That's worth a try I guess...only problem is the memory on my HD2 is so damned tiny...
Will try it and let you know what happens.
Excellent Advice R12SRW!
I uninstalled TomTom Navigator from my phone as I had it installed to the SD memory card and and reinstalled it with the "Install to Device" option.
Now when I connect to TomTom home I have all the map share updates and other options and that "You have an invalid version of the TomTom application" error message is gone.
Thanks alot
R12SRW's Solution worked for me, I'm smiling again!!!!! Thanks.
Mapshare updates installed and load of previously greyed out options are now available.
Had to reset all options in Tomtom once reinstalled to internal memory but all voices, favourites etc remained available so well happy.
Using Tomtom home to 2.8 and navcore 7.918.9193 with latest v865 maps
Reinstall on sd carte
Hello.
I have the same probleme. Does that work if I reinstall on sd carte ?
Tomtom Navigator tt7.918.9193
Western&Central Europe 2GB 850.2801
Thank you