I have a Verizon Touch Pro and the phone wont boot into windows. I tried this but it wont hard reset...
"With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
Continue pressing the RESET, VOLUME DOWN and CENTER buttons until screen."
I called customer support they said only way to hard reset was thru windows - Clear Storage.
Anyone have any ideas.
I can get into the bootloader fine. Dont really feel like going through a replacement.
Nevermind, just found it.
Instructions from the user manual
1. Turn off the power.
2. Press and hold the ENTER (Center) key, and then press the POWER key.
3. Release the POWER key, but continue pressing the ENTER key until you see the following message on
the screen.....
Cant believe a tier 2 tech at verizon couldnt find this.
ramik911 said:
I have a Verizon Touch Pro and the phone wont boot into windows. I tried this but it wont hard reset...
"With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
Continue pressing the RESET, VOLUME DOWN and CENTER buttons until screen."
I called customer support they said only way to hard reset was thru windows - Clear Storage.
Anyone have any ideas.
I can get into the bootloader fine. Dont really feel like going through a replacement.
Click to expand...
Click to collapse
actually i work for verizon and i bought the touchpro the first day it was released and I had to do a hard reset shortly after i received it because of all the tinkering i was doing with it. anyways, the only way to hard reset the xv6850 is to do the clear storage process. the method of holding down the buttons and doing a soft reset WILL NOT WORK on the verizon version. yes and i am very aware of the idiocy that is our technical staff. anyways hope this helps.
I'm trying to figure something out and I don't yet own a touch pro-the answer may effect my buying.
After you preform a hard reset and go through the screen calibration, does the ROM install any software? I mean does it give you an auto prompt that says something like customizing your device? If you've ever hard reset a xv6800 or used a custom UC rom you'll know what I mean.
I have some theories about making the device faster or removing some stuff based on the way our xv6800 was. Mnasr87, do you know the contents of the Verizon extROM?
ramik911 said:
Nevermind, just found it.
Instructions from the user manual
1. Turn off the power.
2. Press and hold the ENTER (Center) key, and then press the POWER key.
3. Release the POWER key, but continue pressing the ENTER key until you see the following message on
the screen.....
Cant believe a tier 2 tech at verizon couldnt find this.
Click to expand...
Click to collapse
Correct way is to hold down the center key and press in the reset button.
Cycomachead said:
I'm trying to figure something out and I don't yet own a touch pro-the answer may effect my buying.
After you preform a hard reset and go through the screen calibration, does the ROM install any software? I mean does it give you an auto prompt that says something like customizing your device? If you've ever hard reset a xv6800 or used a custom UC rom you'll know what I mean.
I have some theories about making the device faster or removing some stuff based on the way our xv6800 was. Mnasr87, do you know the contents of the Verizon extROM?
Click to expand...
Click to collapse
i'm sorry i don't know what the contents of the extROM is but i do know that it does go through the customization screen after doing a hard reset. i hope that helps in the process of hacking the touch pro pm me if you come up with anything, tc.
open clear storage in settings/systems and enter 1 2 3 4
it will restore to the original rom
mnasr87 said:
i'm sorry i don't know what the contents of the extROM is but i do know that it does go through the customization screen after doing a hard reset. i hope that helps in the process of hacking the touch pro pm me if you come up with anything, tc.
Click to expand...
Click to collapse
Thanks, I posted a thread about bypassing customizations to possibly speed up the verizon rom. Usually Verizon has a couple cabs that monitor registry changes and slow things down. But if you bypass the customizations I still don't know what else there is missing (good and bad.)
But knowing I can bypass customizations and that there are now custom roms is a good thing! Now, I need to start begging my parents.
ramik911 said:
Nevermind, just found it.
Instructions from the user manual
1. Turn off the power.
2. Press and hold the ENTER (Center) key, and then press the POWER key.
3. Release the POWER key, but continue pressing the ENTER key until you see the following message on
the screen.....
Cant believe a tier 2 tech at verizon couldnt find this.
Click to expand...
Click to collapse
this works for the xv6850, the verizon touch pro. but technically you should simply tap the power button and not hold it down too long and don't let go of the center button until you see the hard reset screen.
ramik911 said:
Nevermind, just found it.
Instructions from the user manual
1. Turn off the power.
2. Press and hold the ENTER (Center) key, and then press the POWER key.
3. Release the POWER key, but continue pressing the ENTER key until you see the following message on
the screen.....
Cant believe a tier 2 tech at verizon couldnt find this.
Click to expand...
Click to collapse
lol cant figure it out cause they dont have the right information in the 611 knowledgebase. laughed so hard when i saw that.
[email protected] said:
open clear storage in settings/systems and enter 1 2 3 4
it will restore to the original rom
Click to expand...
Click to collapse
This was quick easy and painless. Thank you. I was trying to do it the other way listed online which was not working.
That was phone upside down hold volume down press the enter key and then hold down the reset button. This was almost impossible to do with only 2 hands lol. Also it wouldn't work.
when the phone is off, jus hold center and volume down then hold power. make sure there all being held down.
Out of all methods listed, the only two that work for my Verizon XV6850 are hold the center button and reset button, and of course the clear storage icon in system settings. Just tried them all. The other ones just bring up a screen for completely powering off the device.
mnasr87 said:
actually i work for verizon and i bought the touchpro the first day it was released and I had to do a hard reset shortly after i received it because of all the tinkering i was doing with it. anyways, the only way to hard reset the xv6850 is to do the clear storage process. the method of holding down the buttons and doing a soft reset WILL NOT WORK on the verizon version. yes and i am very aware of the idiocy that is our technical staff. anyways hope this helps.
Click to expand...
Click to collapse
Just did a hard reset on my Verizon Touch Pro by powering off , holding the center button and pressing power. Screen popped right and and inicated it would erase all data press vol up to continue. SO it DOES work...............
GrandMasterB said:
Just did a hard reset on my Verizon Touch Pro by powering off , holding the center button and pressing power. Screen popped right and and inicated it would erase all data press vol up to continue. SO it DOES work...............
Click to expand...
Click to collapse
This is also the ONLY way my Verizon TP hard resets as well. However, I was flashing my friends vzw TP and his won't do it any way but the clear storage way? What gives? Whats causing the difference?
Just as a couple of the guys said before..... For a Verizon Touch Pro not sure about anything else..... but a simple power off...... press and hold the center button... power up and BAM!
all that holding the volume button down....press the reset.... double tapping is totally wrong.....
What in the world is the Center button?
also just wondering if there is another way to HR besides going to settings and clear storage does it do anything different?
hard resetting on Verizon
i think that they disable the way with the down arrow and the other stuff i think that the only way that you can do it on a Verizon phone is by doing it with the whole clear memory thing and 1234 or if you can find a rom that works and so far i have only found one rom that see to works right . and also the one in the manual doesn't seem to work either
I found this thread looking to hard reset my xv6850. Tried everything, but only one method worked for me. I figured I would post here for others trying to hard reset:
with the power on
hold down the center button
press the reset button
btw ... rom ver 1.08.605.4
ramik911 said:
Nevermind, just found it.
Instructions from the user manual
1. Turn off the power.
2. Press and hold the ENTER (Center) key, and then press the POWER key.
3. Release the POWER key, but continue pressing the ENTER key until you see the following message on
the screen.....
Cant believe a tier 2 tech at verizon couldnt find this.
Click to expand...
Click to collapse
this works perfectly fince
Related
hi. i want to hard reset my atom life. how can i do it?
do assist me. need it as soon as possible. thanks.
This is grabbed from another forum after a google search...
"It's normally press-n-hold the on/off button --> press the reset button.
When the green+red button command appears, let go of the on/off button and press the green n red button simultaneously.
This is the standard Atom series hard reset method. Not sure for Atom Life though"
First, Hold Power button and insert stylus into the reset hole
release power button and remove stylus. you should now see message on the screen saying about hard reset, press and hold both green and red button at the same time until. when it's done system will reboot itself.
what risk if when hard reset the batt getting low?
Hard reset normally takes less than 5 seconds to clear out your older settings. Though you better charge it before hard resetting.
hehe.. if the batt getting low and die . so how?
hendranata said:
hehe.. if the batt getting low and die . so how?
Click to expand...
Click to collapse
connect your charge, wait 5 minus then hard reset, go go
will there be any effect on the data saved in my documents and memory card?
you can read the Manual
thedonbk said:
will there be any effect on the data saved in my documents and memory card?
Click to expand...
Click to collapse
a.f.a.i.k, ther wont be any critical defects on ur mem-card n my docs.
anyway, hard-reset clears off the saved data in ur "my docs". so it doesnt matter anyway.
its better to avoid such situation wher u dont have much batt left, and still go do a hard-reset.
a hard-reset normally take onli like less than 4-5mins.
unlike flashing in new rom from dsuu mode or sd-flashing mode, wher its safe to keep a 70% lvl of batt b4 start flashing.
hm.. hold power on/off and reset ... i try twice fail.. how?
yes..same with me..how?
hendranata said:
hm.. hold power on/off and reset ... i try twice fail.. how?
Click to expand...
Click to collapse
To hard reset.
Keep the Power On button pressed. Then put the stylus in the reset hole. Dont leave the power button till you see the hard reset screen.
This is the exact way. I've tried it so many times
1. Hold the RECORD button (the one near the camera button)
2. While RECORD button pressed, with your stylus, push the softreset button (the one at the bottom, in the hole)
3. Hold both button for about 5 seconds
4. Release ONLY the soft reset button first
5. Then the screen will display some hard reset sequence
6. Then you can securely release the RECORD button
Attention, those are the step by step. Missing one sequence, and it will be failed
But, after the hard reset menu apeared, i don't know which menu to select if i need to hard reset my atom life. Any help with this?
How do I soft reset Toshiba TG01. Tried searching with my limited skills but dint get anything.
Try to search in user manual (page 22)
1. "RESET" button under back cover or
2. Press & hold power key for 15 seconds or
3. By software like that.
Thanks a lot...
Should have checked the manual. Most basic thing. With the convenience of internet we get lazy to check the old stuff.
There are a few ways of soft resetting the TG01.
1st you can use the softreset you find in programs like SPB mobile shell and Quickmenu
2nd you can use the soft reset button located under the battery cover.
or 3rd you can press and hold the power button. If the phone has locked up, I find holding the power button in for a couple of minutes turns the phone off, if its not locked up a power off window should pop up on screen.
If you meant "hard reset" then thats a different matter and I think a thread already exists for that.
You can also soft reset by removing the battery
I'm surprised that nobody has mentioned:
1) Remove the battery.
2) Count to 10.
3) Replace the battery.
Soft Reset - Shortcut
dashing_arien said:
How do I soft reset Toshiba TG01. Tried searching with my limited skills but dint get anything.
Click to expand...
Click to collapse
If you add the attached shortcut to your device (can be placed where you line, but suggest in ..\windows\start menu) this will allow you to simply tap to achieve exactly the same effect as pressing and holding the Power button. When the device has powered off, then simply press Power to restart; that is a Soft Reset.
View attachment PowerOffHint.zip
I use this app, which is also skinable. Loads of skins available to match your theme.
To avoid to have to remove the back cover when TG01 is blocked, I made a little hole in the back cover!
keep hold vol up +camera and power button and then follow instruction on your phone.... u ll loose all your data on phone.
method 1
put it in the oven for 20 mins, take it out, throw it at a wall. job done thats a soft reset.
method 2
press reset button
anwar1122 said:
keep hold vol up +camera and power button and then follow instruction on your phone.... u ll loose all your data on phone.
Click to expand...
Click to collapse
Slight confusion here.... that is a HARD reset. And as stated will loose all installed apps, settings and data (other than data on uSD Card).
Regards,
Kevin
Hello guys. At first i´m so sorry for my bad english, so i´ll show you a video of my problem.
Phone - HTC Hero, Android 2,1
Video:
I can´t post outside links in my messages...
youtube. com/watch?v=V1BwQZsoKCk
It will not go to sleep mode when pressing the end/power key. But it still takes phone OUT of sleep mode, but now I have to wait for the screen timeout instead of pressing the button again.
I tried to find answer to my question, but i failed... I tried Reboot, Spare Parts - i don´t know if it worked properly, Hard reset, but the power button still not working properly.
Thank you! Marty
Restore you phone to the default setting and softares
Sent from my awesome X8 using Tapatalk
I tried that... No results
Marty Chill said:
I tried that... No results
Click to expand...
Click to collapse
Try to restore your phone to the default, or try to install a custom rom
Sent from my awesome X8 using Tapatalk
Now i did a ROOT and i try to flash in some ROMs but it still not works + it cancels my outcoming and incoming calls...
Sounds like you have a failing power button.. like I do.
It's a real pain in the ass... been looking for solutions for quite a while, besides physically replacing the circuit board the button is on...
I know this is old but for anybody researching the same problem... after trying MANY different apps for taking over power button tasks, the only real solution was to buy a replacement "Flex Cable" assembly on eBay. Takes some bravery to install but everything works now.
But that's just my experience.
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
lucaoldb said:
I suppose that the simplest way out id button remapper that you can find hear at xda.
By using such software you can easily turn any of the other physical keys of your device into the power button.
Click to expand...
Click to collapse
True, and they did work once the phone was up and running. However, when something went wrong on my rom and I needed to get into recovery to re-flash... I was SOL.
Yes, remapping is applied only after the kernel is loaded... So remapping is quite useless if the phone is switched off.
ok so I'm new to this forum, was suggested to go here when i got my first smartphone.
So basically my idiot friends were messing with my phone with the pattern lock. They messed it up 15 times and now I have to sign in with my gmail. But the problem is that whenever I try to sign in, it gives me invalid username/password. I know I'm putting in the right password and right username because I've done it about a million times on my computer and tried to unlock my phone about the same amount of times. I've also tried all my other gmails that my phone is registered with but none work.
I'm still on stock ICS because im new to the android world and haven't gotten around to figuring out everything. Thanks for helping!
Okay first did you possibly have your Android debugging on? If not the only way us a factory reset. You can reset it by turning it off, hold down power and volume down. While holding volume down let go of the power. Then using your volume keys select factory reset and select with the power button.
Sent from my HTC One XL using xda premium
alright thanks! but when do i let go of the power button? when i tried it, it booted up into safe mode
don404303 said:
alright thanks! but when do i let go of the power button? when i tried it, it booted up into safe mode
Click to expand...
Click to collapse
Okay so first press down the Vol. Down button. Next press the power button firmly for 3 seconds. DO NOT let go of the Volume down button till a white screen (Your bootloader) appears. Then use the volume buttons to select factory reset (If it's not there look for bootloader or somthing like that) press the power button to select.
Volia your phone is now factory reset!
Sent from my HTC One XL using xda premium
Ive been messing around with this for a few days now with no luck.
My was acting sluggish a few days back so i restarted it. Well low and behold Im getting the "Starting RSD protocol support" message on top of the dual core logo now.
I've searched around, and have have tried all i can think of. I have SBFed the phone multiple times, using the tutorial here, with no luck.
After SBFing the phone it just returns to the same state.
The battery IS fully charged, so we can rule that out. Maybe, just maybe, the volume toggle is stuck but it clicks up and down with no issues.
Anyone have any ideas? Ive been pulling my hair out on this one. Phone is on Verizon prepaid so its grandfathered in at 95/month UNLIMITED data , and they dont seem to willing to let me switch back to my Droid X or anything else for that matter.
Thanks in advance for anyone with ANY ideas or suggestions.
edit as a side note i have been rooted for 6 months no issue/and am on Eclipse. I had not changed any settings in a few months and had not installed any apps in a few week. This was pretty out of the blue.
My first thought (before I read you had this thought also) was that your volume up button might be stuck. Or the trigger inside anyway. If thats the case, you will probably have to find a way to get that button off but I have no idea if thats possible without breaking your phone. Other than that, I dont know what else could cause it. Especially if you SBF and it still does it.
Try this to see if you have a faulty volume button. Turn the phone off and turn it back on while holding the volume DOWN button. I forget what the first option is but it will say something at the top. first of all, if your volume button is stuck in the up position, it might start whatever the first option is. If not, press the volume down button until you get to Android Recovery. Then press up. If you do this, I'm guessing your volume up button is working as it should. Pressing up will start the recovery. When you see the triangle image, press volume up and volume down at the same time. try wiping cache and data and restart and see if that does anything.
jsgraphicart said:
My first thought (before I read you had this thought also) was that your volume up button might be stuck. Or the trigger inside anyway. If thats the case, you will probably have to find a way to get that button off but I have no idea if thats possible without breaking your phone. Other than that, I dont know what else could cause it. Especially if you SBF and it still does it.
Try this to see if you have a faulty volume button. Turn the phone off and turn it back on while holding the volume DOWN button. I forget what the first option is but it will say something at the top. first of all, if your volume button is stuck in the up position, it might start whatever the first option is. If not, press the volume down button until you get to Android Recovery. Then press up. If you do this, I'm guessing your volume up button is working as it should. Pressing up will start the recovery. When you see the triangle image, press volume up and volume down at the same time. try wiping cache and data and restart and see if that does anything.
Click to expand...
Click to collapse
Yeah, I should have included that, it wont go into recovery by pressing the down button while turning on. Guess it might be the actual switch. Anyone have any ideas on that?
edit And suprise if you hold the up button while turning on you get the RSD support msg! (if its working properly) Its gotta be something hardware at this point. i hope not...
Yeah, if you hold Up while powering on, it will start RSD automatically. If you hold down, it gives you other options to scroll through. It could very well be hardware related if that isnt working. Unless someone else has anything else to say about it.