hello everyone,
i had a problem while i was installing a cocked ROM
i installed a cocked Rom LILLY ROM v1.2.4 and i wanted to get back the original Rom again.
so i Run sspl-1.16-nike.exe from my phone and i started to install the official Nike ASIA WWE 2.12.707.2 Radio R 1.65.29.22
during the instalation on 14% i received an error:
Error 264 connection and till now i can't get my original ROM and can't use my phone i still see the 3 colours screen with the message: Upgrade ROM code error please try again.
i tried alot of times to do recovery by the same software but all are failed
please help me!!!
how i can get my original ROM again
my htc touch dual is really brand new (one week)
Related
I tried to downgrade from Mysterious so i can try the new Rom from gullllum Prophet touch IX beta 3 and whenevr i tried i had an error message saying either cannot connect to device, the update utility is old !, or cannot define device or something my device is ofcourse Prophet touch and now currently ROM Less as it is on the bootloaded only or starts the start screen with the IPL and freezes please advise.
Mwalid said:
I tried to downgrade from Mysterious so i can try the new Rom from gullllum Prophet touch IX beta 3 and whenevr i tried i had an error message saying either cannot connect to device, the update utility is old !, or cannot define device or something my device is ofcourse Prophet touch and now currently ROM Less as it is on the bootloaded only or starts the start screen with the IPL and freezes please advise.[/QUOTE
Hi THere,
Take a Look Back.
1. you have to use Active Sync 4.5
2. Before you change the ROM to another Cooked ROM,you have to downgrade your prophet using ROM NVID (step 1 ROM) before you flash the prophet, so basically you can change the Prophet ROm after you flash to WM5 ROM (NVID or PVTemp ROM)
3. Do flashing if your sure that the prophet can be access using active sync.
Hope it help
Click to expand...
Click to collapse
can anybody help me ? after all process been done at the process for the rom update , the active sync suddenly off , then my gene got 3 color screen addon the ruu come out with an error code 266 ... any ppl can help me ?
try to upgrade rom without SD card.
which GENE version you ave and which ROM you'r trying to use?
GENE_wm6.1_19971wwe fusion9.0 (01/10/2008)
pls you go back up by offical rom
Hi, every body! I'm using cingular 8125 current OS WM 6.1 (Touch Flo V. 1.0). I want to update to OS WM 6.5. But error with code 266 or 260. I check all about connection. the status is USB active sync connected. Itried to update without SD or SIM card too but still error with code 266 or 260. How can I do? Can you tell me the link that OS WM 6.5 supported with cingular 8125?
hi every 1 ...
here is the situation i'm in:
Each time I tried to upgrade my HTC Touch Dual with another Radio(like 1.71 or 1.65) ,i prosed with the operation but it did not complete for an error on 100%!! then my phone was stuck on the three colors Screen with some words:'Upgrade ROM code error Please try again'
RUU_ERROR_226 FLASH WRITE
But It semms allright when I managed to upgrade a ROM without radio...
Please help me ....
Regards.
P.S. three colors Screen with following words:
RUUNBH
NIKI100
SPL-1.22.Hard
CPLD-4
Upgrade ROM code error
Please try again
Serial(or USB)
I upgrade a Chinese version ROM.... And everything is okay now.....
so strange.....
Hi am using a dopod u1000 .my device got hung with the dopod logo so i tried flashing it through bootloader .i have a locked version of SPL-v1.11.0000 and IPL -v2.02 I downloaded the ROM from the thread in here (megaupload,com/?d=6NEK86NY]) but when it reach 12 percent of the upgrade it stops and a error message is shown (ERROR[262]:UPDATE ERROR).I tried recovery option many time but the process stopped in 12 percent only .....CAN anyone plz help me to fix it and i want a proper ROM too...
First unlock your phone, update radio, hard SPL with SPL 1.2 or 3.5
but how do I unlock SPL to a higher versio am stuck with bootloader now
sureshchander said:
Hi am using a dopod u1000 .my device got hung with the dopod logo so i tried flashing it through bootloader .i have a locked version of SPL-v1.11.0000 and IPL -v2.02 I downloaded the ROM from the thread in here (megaupload,com/?d=6NEK86NY]) but when it reach 12 percent of the upgrade it stops and a error message is shown (ERROR[262]:UPDATE ERROR).I tried recovery option many time but the process stopped in 12 percent only .....CAN anyone plz help me to fix it and i want a proper ROM too...
Click to expand...
Click to collapse
I have same problem. Have you tried flashing original DODOP U1000 rom? or flashing via MINI-SD card?
hi guys,
trying to upgrade the radio rom, im using the customRUU and its getting to about 99% and then its getting the error 290: invalid command.
and now it only boots in the red, green, blue and white bootload screen.
heres some info if it helps:
SPL-1.42.HSPL on my hd2..
windows 7 home premium, (i tried running as admin, no difference.. also tried several other usb ports)
help would be appreciated!
thanks guys!
have you tried a good ol MTTY or Task29 before flashing?
does the phone boot to RGD screen?
what Radio you using?
And you have the phone HSPL unlocked?
dodgy download perhaps? tried another radio?
did anyone find the solution to this problem??
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
What exact ROM versions have you tried, and what SPL or HSPL do you have showing in bootloader? Also is there a radio currently on your HD2 and what is that radio if so?
normally phone hd2 leo and italy not t mobile ant spl 208 hardspl maked bootmode okay ( also write boot with jtag ) radio ver 2.15.50.14
webiso said:
l have same problem not upload any rom and radio tryed everything same eroor %8 and error 290 l dont know what is problem
Click to expand...
Click to collapse
I had the same problem. I was trying to restore my phone to original firmware, due to issues with custom firmwares. I had managed to extract the NBH from the installer provided by my carrier, and used CustomRUU to flash the phone, but the phone was not booting.
I then flashed one of the EnergyROM builds onto my phone.
After that I could not get the original firmware onto the phone, error 290 at 9%.
I booted my phone into the bootloader (red/blue/green), and used HSPL2 to set SPL to 1.42.HSPL. I could then flash the original firmware.
My phone is now working fine, as best I can tell.
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now