Hi there,
I have problem with my o2 atom exec, ive recently changed my battery into the new one, and do nothing except changing the battery. After changing the battery my atom exec start to blinking, just the same as this user post in youtube
Youtube Video
Ive tried every possible way to enter bootload mode, but nothing works. Ive followed the instruction on the wiki in how to enter bootloader mode when you have semi brick atom, but that just not work.
Not give up yet, ive tried the forcing bootloader mode in wizard as they mention it here. But again nothing happened.
Anybody has any idea how to solve this issue, because the wiki said that i have to enter the bootloader mode first before i restore the rom into the original one. Any help will be very appreciated. Thanks all.
anybody here ?
U have to be very carefull while pressing and releasing the buttons otherwise it will not work.
OR
Hard reset ur Atom Exec.
Try it.
Related
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
an-huynh said:
After I upgrades the new WWE ROM , When I finished, I hard reset my device, and my atom exec stuck at O2 screen , I tried to go to bootloader to install again but I could not , it go until preparing to install the new rom, it notice that the connection errors, usb transfer fail, please use DSUU in OS mode and sync with PC first.
I thought maybe I still kept the mini SD card in the side when I hard reset so it caused this error.
Can anyone help me fix this ?!
Thnks & Brgds
An Huynh
Click to expand...
Click to collapse
I think I met someting wrong in bootloader file, Could anyone help me and send me the origin Atom exec ROM file (not the latest file). I think I should get these files to up load bootloader again.
Rgds
An-huynh
hi, i have something similar to above problem,,
my O2 Xda Exec, showing white screen after O2 screen.
this problm started,when i tried arabizer (arabizer13bn257)
pl, help
rgds
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Ultimate Chicken said:
Your atom exec lost its extROM.
http://forum.xda-developers.com/showthread.php?t=292115
This problem is also present in the Atom - and if you're getting that message, it means your bootloader has been updated to NOT allow flashing directly from it (thanks, Quanta).
I can't help you with reflashing the BL (you may want to do a search on these boards tho), but try this: turn the device on and leave it for awhile (say 10+ mins), and see if you can get into the Today Screen at least. If you can, simply sync as guest on your PC, then run the DSUU updater. I saved my hacked Atom (using the Exec rom) this way.
If you can't - then I think it's time to call in a warranty.
Click to expand...
Click to collapse
I left it for more than 15 minute but nothing happens.
I think the same to you. but i see it can read & execute from mini SD card.
Does anyone can help me ? Which file of bootload that I can execute directly from mini SD card ?
Rgds
An Huynh
Anyone can help me ?! Please !!!
Rgds
An Huynh
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
ozamalloa said:
Have you tried taking out the battery? This happen to me once a month, and when I took the battery off and then turn it on again it oasses the O2 Screen and continues with the Windows Screen.
Click to expand...
Click to collapse
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
an-huynh said:
I tried all things like this ! Still cannot ! Anyones can help me how to install it from the mini SD Card ?! I think we can recover from mini SD card but don't know what kind software to but in this mini SD to do this !
Rgds
An Huynh
Click to expand...
Click to collapse
Can anyone help me ????
Rgds
An Huynh
I have the same problem now
I've got the same problem with my ATOM.
Anyone help us plz??
i have same problem too, whenever i start my atom exec it directly goes to MN2 bootloader, i tried rom update but it asks me to run it in OS mode which i can't do as my device never goes past the bootloader. i have read of a miniSD card method to try upgrade but this bricked the atom in all cases i read.
Please we need a solution for this, my atom's warranty is over
hi
i updated my atom rom version to 3.3.3 three days ago.It installed completed i used this rom 3-4 hours then i was freeze and i try to reset it. it didnt respond so i decided to hard reset to my atom.I tried to hard reset now it says "device clean boot....." it stuck this screen then i try to reset the device then it stuck o2 screen it didnt pass to align screen. i cant use my atom for three days
Please help me......
remove the battery for a while.. then try hard reset / reflash
i try this method but it is same it doesnt work
did u try the instructions posted in aku 3.3.3.??..
"
For those of you who have downloaded and flashed using SD Card method who ended up in a brick! ITEX recovers his Atom by following procedure:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button
4. replace battery while still holding the buttons
This will bring you back to bootloader mode. Just flash the above DSUU.
"
Does it have a chance to use wm6?
joolawan said:
Does it have a chance to use wm6?
Click to expand...
Click to collapse
it can barely use WM5 and anyway these chinese splash their advertising for WM6 all over the place in hope ppl will buy their rom, until I see it running in my device or get confirmation from someone reliable (such as Jiggs) I dont believe a word of it and besides the 3.3.3 rom is very fast and ten times better than any actual official release
yes i tried to that method too. it is same it still stuck on o2 screen. it doesnt pass to align screen..please help me
my problem didnt solve pls help me i cant use my atom..........
plsssssssss help meeee...........
plsssssssss help meeee...........
R U able to go to bootloader mode ?...
ironeagle said:
R U able to go to bootloader mode ?...
Click to expand...
Click to collapse
try to be on the bootloader and reflashed the ROM. try to search same cases in the forum. I think they solved the problem alike.
yes same to problem. i dont re enter bootloader again :S
did DSUU Recognize your ATOM ?..
Connect your ATOM to PC (using USB)
Run DSUU
Try to flash it..
i can enter bootloader mode and i can update rom but after this proccess it says "device clean boot......" and it freeze . it doesnt pass to align screen
plssss help meeeeeeee.
Which ROM you flashed?..
i flashed orginal atom rom i downloaded from seeo2.com
pls helpppp meeeee my atom is dead
are u using o2 atom exec or just atom?
cuyz i've got o2 atom exec..maybe i could flash it with o2 atom (yeah i cant flash anything with dsuu)
mine is o2 atom
did u amend any thing from the original ROM from seeo2? I mean you flash your atom with the original ROM...0426? without replacing the extended ROM...etc?
If anyone can help me I just brick my ameo. I download olipro unlocker followed steps had everything done but after i finished the 1step it wont boot up again its just dead. tried hard reset alot of times wont even go pass it . it just light green.Pls help
Can you enter the Bootloader mode?
Press Camera Button (completely) and hit the reset button at the same time.
i know yor problem press cambutton and powerbutton for at same time so you will come to the bootloader modus now plug in your usb cabel to your device and your computer now open the image of wm6 that you want to install the setup will find your ameo now
hope you will get it
good luck from germany and sorry my bad englisch
Thank you that Fixed it. I just panic but now the whole process was finished. from 1-3 now. thank you for the reply
please help.
I have the same probleme and i can´t enter the Bootloader mode.
remove sim and storage card then do as mosho said
ie press camera, comms button and reset button then restore original rom , then olipros program
as per the wiki
http://wiki.xda-developers.com/index.php?pagename=Athena_Resets
cant get into bootloader
hello,
i cant get into bootloader at all.
i removed the sim and the memory card, al i get is a short flash of red light t the joystick, and only if the device is connected to the power cable.
it doesnt charge, it does nothing. i tried really everything.
does anybody have an idea?
thanks
mike
try a service exchange at t-mobile. there seems to be something wrong with your device.
my ameo had no probs running olipros unlocker.
regards dieter
i used the unlocker with another ameo i bought, and it worked fine.
so i tried the same with the 2nd, and it crashed.
will they find out that i tried to unlock the device?
regatds
mike
ameo dead
Hi mikekarl
we have the same problem that happened to me today.
i have done it before with another ameo worked fine.
Now i cant get into bootloader or Hardreset.
and i cant try a service exchange because iam not t-mobile customer.
Pls help
Three days back,my SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
I had a similar problem with mine. The screen is the same as yours only varying with the sim card removed to a sim missing logo. Also mine makes the error/message noise repeatedly for a phew secoonds every half hour or so.
I just gave up in the end and admitted it was a brick
and the saga continues
Well the TyTn has died and I'm still waiting on a refund on a dodge wizard so its time to dig out the old SPVs I have a working Tornado (the right soft key has packed up thats a little annoying) so am trying to revive this hurricane.
I have linked some pictures of what is dose display and as you can see it will load into boot loader but due to not being ably to unlock it I cant flash any of the roms I have found.
I have been trying to fix this now for well bloody ages on and off but a good straight 12 hours just recently and to no avail.
In short I need a way to unlock the phone without active sync. The only way I can think of being able to do this is with some kind of specific software through boot loader
Any ideas?
HELP PLZ DEAD SPV c550 During WM6 Upgrade
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
hi guys
I have a bricked hermes
DOPOD 8525 -> WM 6.1 Professional
From bootloader screen
HERM100 IPL-1.01
bootloader SPL-1,40.01ipro
Tried to flash ROM using safe SSPL with RUUwrapper.
At completion of flash both my mobiler & win mobile device centre disconected or lost connection with device, after soft reset will only load up to second HTC screen. How can I recover from this brick? device manager recognises HTC usb sync when plugged in but I can't connect to re flash rom.
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Thank you Zocster
Got it unbricked & working, thanks to you I have a lot of trouble reading as I am leagally blind but get by with T2V & magnifiers most times. however searching threads is a lot harder than for most.
thanks
Lou
PS if you ever cross the tasman drop me a line
loulian, to make it easier to recover from bricks, It would be best if you flashed Hard SPL V7 from here - http://forum.xda-developers.com/showthread.php?t=296722
It won't guarantee a flawless flash but will help if something goes wrong by giving you a GOOD chance of recovery.
You can then use the sd card method and make life easier by not having to worry about pc crashes, cables being pulled, blackouts or those annoying "sync" errros.
Cheers...
Also if you have trouble setting up your Hermes after a flash/hard reset because of the alignment points being hard to see, It would be a good idea to download this -
http://www.codefactory.es/en/downloads.asp?id=44
It will, after you save the settings, allow you to use your PC to set up the Alignment point if you need to Hard Reset or flash your phone making it load the os to the today screen.
zocster said:
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Click to expand...
Click to collapse
Sorry to ask a stupid question. I have the same problem, but when i try to flush it from a TriColor mode i get a communication error, it complains about activesynch not connected. BTY mine is cingular 8525 so i am trying to use one of the cingular roms.