Related
hi every 1 ...
here is the situation i'm in:
i tried to upgrade my HTC Touch Dual with an HTC Touch official ROM ,i prosed with the operation but it did not complete for an error then my phone was stuck on the three colors Screen after that I've reseted the phone ( hard reset ) by pressing the call ,end call ,power and reset buttons all together and here...i realized that i made a disaster because that my phone is not starting and make no response on the screen and it's totally black and when i connect it to the PC ,the indicator light led torn's red!!! and the PC dose not see it i tried to hard reset it again it didn't work.
Please help me ....
Regards.
hi
hey m8 i had this problem b4 also i just ran a different rom whilst it was in the tri colour screen and it was all up and working again.
hope this helps
kind regards Martin J
Thank's 4 the fast response bro but the problem that is when i flashed the phone with wrong ROM i had the tri color screen but after that i hard reseted the phone as i described above and the phone went died and red lid light indicator on USB cable.
Regards
Saif Al.Deen.
have you tried to enter the bootloader?
yes i did if it mean's pressing the camera and the reset button together but i learned this method in an HTC Touch thread replay so if it's the same (pressing the camera button and the reset button by the styles) it means that I've also tried it and did not work. and please ,if there is any other way to enter the Bootloader just feel free to tell me about it cuz i think that when i get the tri color screen again i will able to flash the phone with official English ROM of WM 6.1 that I've downloaded from the HTC site unless there is some thing that i don't under stand.
thank's Midget.
http://wiki.xda-developers.com/index.php?pagename=Enter in bootloader
I did use the method (pressing Power+Camera+Reset) and I've got the tri-color screen the PC saw the phone and I've got the "USB" text on the phone screen then i started the ROM upgrade utility then i noticed the text under the tri-color is changing once "Serial" and another "USB" and so on until it stay's on the "Serial" and the upgrade utility show's an "Exit" button ,i press it ---> it exit's!!!.then i just disconnected the phone and reconnected it to the USB the tri-color showed the "USB" text then i started the ROM upgrade utility and got the same results.then i soft reseted the phone by the styles and get back to the same old situation ( black screen and red led on connection) and the phone is not entering the tri-color mode using the same method using the same method u linked me in ur last replay (pressing Power+Camera+Reset)!!!!!!!!
What should i do ...
please help me coz no one to ask near me and we have no HTC center here in Iraq and it look's like that i'm the only one who carry an HTC phone in my hole country!!!
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
Now ...here is what I've got:
thankfully managed to get back to the tri-color screen it seem's that i had a problem with USB cable ,any way ...i started the ROM upgrade utility that i downloaded from the HTC official web site that named (RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) at the first time i had a connection error 260 then i disconnected the phone then reconnected it the PC saw the phone and the upgrade utility did too and started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
It's some kind of a progress .. right..but what's wrong ?? Q/ is the ROM ?? A/ I downloaded it from the official web site and it's for the HTC Touch Dual...then what????
Please do not let me down ... my hops are only on ur experiences.
Regards.
sparketo said:
thankfully managed to get back to the tri-color screen
Click to expand...
Click to collapse
That's good. Ready to flash again.
RUU_Nike_HTC_WWE_2.09.405.1_Radio_NikeMR_1.65.28.25_signed_Ship) ...started to upgrade the ROM but when it reached 1% i had this error (ERROR [294] INVALID VENDER ID ) with an "Exit" button !!!!!!!!!!!!!!
Click to expand...
Click to collapse
The phone is locked to a particular phone company. You'll need to unlock it first. So, a bit more work needed. Follow this thread. but make sure you read it carefully:
http://forum.xda-developers.com/showthread.php?t=395945
Ok now...here is the situation:
as u advised ,i went to http://forum.xda-developers.com/showthread.php?t=395945 and it say's in (1.) that i must have a HardSPL 1.15 MFG installed (i have SPL 1.18 installed) then i went to the thread http://forum.xda-developers.com/showthread.php?t=355730 to get the HardSPL 1.15 MFG and i've found it but here is the problem:
in step (4.) i have to install sspl 1.16 nike.exe by copying it to the phone memory ,but i only managed to enter the tri-color screen and i can not copy any thing in to my phone so who am i gonna install it??? then i saw the other attached files flash-hardspl-niki.zip and flash-splash-niki.zip and all others ,what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar.
USB of Serial in the bottom wight bar.
thank u all 4 ur effort ,but i have no place else to ask for help....
so please stay with me to the end ...i hope it will be a happy end.
Thank's
sparketo said:
what i get when i start the utility after unzipping the attachment is error in connection and the bar stay's on 0% and start the recovery system....
by the way ...all i see on the tri-color screen is the following:
RUUNBH on the right upper side of the screen.
NIKI 100 ,SPL-1.18.0000 and CPLD-4 on the upper left side of the screen in the red bar. USB of Serial in the bottom wight bar.
Click to expand...
Click to collapse
From this point, we know you have SPL 1.18 on board, with a locked ROM to a phone carrier.
Best advise I can think of is to get the official ROM from the carrier and flash that. It will get you back to starting point
After that, copy SSPL 1.16 to phone, and run that on phone, followed by falsh to Hard1.15MFG before trying to unlock the phone.
ok Rling .....
the phone was sent to me from Holland (Netherlands) and when i was turning it on on startup it show's a logo of number (1) or something like that.
so please can any one tell which carrier is that and where to find it ????
by the way Rling and Medget and every one ,thank u all for ur time u spend helping me ^_^.
Best Regards.
try to find your phone's original country in following website.
http://service.htceurope.com/htcdistributor/Default.aspx
then, you can know which language rom is suitable to your phone, try to find it.
flash the original rom
everything will be ok...
Good luck
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Yes Yes Yessssssssss at last Windows boot's up my phone after a long week ...
spesial thanks to homerh ... thank u bro without ur help i would throw my phone in the garbage. God bless u.
And thank u all for ur help.
Best Regards.
Saif Al.Deen.
sparketo said:
Thank u 4 ur help Justsun i really pretiate ur help i found this link qaite helpfull and i managed to find the original carrier which is KPN and it's in Netherlands, the problem is, i do not understand any word in the web site because it's not in english and some how it look's like that there is no traise for the ROM in the site.
so please any one can help me with providing a link for the original carrier ROM of KPN or send it to my email or just any any thing just i'm feeling so disperet ...
Thank u all...
Click to expand...
Click to collapse
you can go to www.htc.com then find suport, use your sn, you can download the original ROM. flash it first, then flash other rom which you need.
Thank u Justsun ,i just solved it by the help of Homerh and now i have the original ROM on my phone and by the way , i did not flashed it ,Homerh teached me how to restore the original ROM on the phone using the mtty and that's it. now i'm looking for a ROM that support Arabic for my HTC Touch Dual ,if u can help me find it ,i'd be pretiated.
Thank's.
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Please help MODS..!!!
Also tell me how to use .NBH files for GENE I mean is CUSTOM RUU is ok???
& if yes then which of the 6 options is to be selected..!!!
I am using VISTAS...!!!
sugestion
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Click to expand...
Click to collapse
haree said:
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
Click to expand...
Click to collapse
Mr HAREE I tried with the "OLD_GENE_ORIGINAL_WM6" ROM but I am having same UPDATE [300] error..!!!
I am trying every ROM available for GENE please guide me..!!!
My cells manufacture date is AUGUST 2008..!!!
Can you tell me which CUSTOM RUU to use for GENE .nbh files & which option of all those is to be used cause there is no SPL1.10.Olip in it & also the CID unlocker for GENE from bootloader cause thats what only I can access now..!!!!
& another thing in "SPL Unlocking Tools-SPL updater-Orefkov"
"wcescomm.exe" in step 4
I am not getting USB in step 6. "Run mtty1_42.exe programm, and press button "USB""
NOTE: - I am using VISTA
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
stupidgye said:
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
Click to expand...
Click to collapse
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
try this
hi
as per the ur spl mentioned and mine is the same so urs is a old gene i hope the numbers mentioned is right now try this
1.off the phone
2.take batter out press the power button for few secs around 3-4 secs
3.put battery back into the phone keep pressing camera button and power on the phone this should get u the tricolor screed if u get it good attached USB cable and flash an new ROM with ROm utty
or
press camera button and restart the phone with stylus this should also get u the tricolor
if u down load the besfenROM it also has the Rom utty with the ROm us this one and not the ROM utty u already have with u
good luck
heartsurfer008 said:
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
Click to expand...
Click to collapse
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
ankit360 said:
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
Click to expand...
Click to collapse
I am ONLINE, my GENE has started but need your help for updating..!!!
heartsurfer008 said:
I am ONLINE, my GENE has started but need your help for updating..!!!
Click to expand...
Click to collapse
Pls Explain how it could be happent?? does the update process interupted??
use windows XP
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Still messed up..!!!
BesFen said:
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Click to expand...
Click to collapse
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
I want to update the ROM, I tired all the ROM roms but having the same update 300 error, My GENE is AUGUST 2008 manufactured & has SPL 1.10.Olip..!!!
So I need a proper CID unlocker & the proper BOOT LOADER UPADTE & RUU..!!!!
Can you help me???
& are you on any networking site cause its easier to communicate..!!!
Facebook : - http://www.facebook.com/profile.php?id=1442055873
Orkut : - http://www.orkut.co.in/Main#Profile.aspx?uid=13511036999101959478
heartsurfer008 said:
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
....[/url]
Click to expand...
Click to collapse
Is your Gene working at the moment with the .Olip SPL? If yes, then your Gene is already unlocked.
Try any ROM you wish, just make sure that its post says that it is for "Old Gene". You may try a lot of Good ROMs from this forum, I can't suggest you any specific since its against my principle.
Best of Luck and happy flashing?
try to flash ur device on that tri color screen
if it is unlocked then it will definitely get flashed with any ROM for old gene, and if their is some problem them u probably have a new gene sso try orekfov method to unlock
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
krazy_about_technology said:
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
Click to expand...
Click to collapse
@ krazy_about_technology, sorry but I am not a NOOB, i have updated many ROM's but I am using VISTAS BLACK version by AMIT AGARA so I couldn't
update or technically DEGRADE the ACTIVE SYNC, that is the prob with it..!!!
& I have read the whole tutorial almost 10 times but still it didn't help me...
I have tried all old & new ROMs both using VISTAS & XP but my GENE is not getting updated..!!!
ERROR
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Done that
krazy_about_technology said:
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Click to expand...
Click to collapse
Do you think I haven't tried that???
I have done it on a CLEAN original valid version of XP but the same prob..!!!
Just check out that "UPDATE ERROR 300", I find that something unusual..!!!
Just see the PIC I have uploaded above this..!!!"
Hmm... Have you tried using the Orefkov unlocker method? What output is it giving? Try doing it after removing the battery, holding down the power button for 15 seconds and then then putting battery back and restarting phone in bootloader mode. I will try to get more info on this in the meanwhile.
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
sunnymobile said:
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
Click to expand...
Click to collapse
r u stupid ? who told you to install oref hspl
i request all members of xda forum to not reply this type of post some stupid ppl creating same type of post daily without searching
n y do u use HSPL everytime u flash
n y do u use HSPL everytime u flash
i think this problem can be sort out if we can create the bootloader image of an OLD gene then using it through MTTY with the old GENE SPL image
Anybody knows how to do this?
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
just a suggestion, found this for some other device.
hope this will work with urs too
do it at ur own risk
hey sunit here is that nb fileView attachment 1.10-Olipro.zip
stupidgye said:
hey sunit here is that nb fileView attachment 192772
Click to expand...
Click to collapse
guess its time u changed ur id
Lol yeah, Vaibhav this id doesn't looks that cool yaar And thanks for the Olipro SPL. I will develop the unlocker setup tomorrow.
Its just a login name yaar. BTW can i change it without creating a new profile?
NAAM MEIN KYA RAKHA HAI BHAWNAO KO SAMJHO
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Yes u can change ur id
hi
yes u can what i did is ask a Mod who has become my friend through this Forum
but pls note i had also asked the same friend to make ur SPL cheker a Sticky and the same was done so i don't think it would be right now to ask him again
but ultimately it was done by Flar who is the admin for this forum so i suggest that u send a PM to flar and give a few options for ur id and im sure if possible it will be done good
i too feel u need a Id change and may be u can change it to smartkid as that is wat i would call u
krazy_about_technology said:
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Click to expand...
Click to collapse
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,
I will try to explian what i did , and if u can hlp me pls .. I buy htc evo 3d from some guy on internet , phone was perfect evrything was wokring till 2 monts after i try to start wifi he write error , then i try to put new android rom on phone .. And i must say i am noob in all of this , so i try this thing 1st
1. Through fastboot. Open the command prompt, connect your device by USB cable, check USB debugging is enabled. and enter the following code
Code:
adb reboot bootloader
wait till your device enters bootloader and shows fastboot USB, now enter the following code.
a. For unbranded devices.
Code:
fastboot oem writecid HTC__001
fastboot oem lock
fastboot oem reboot bootloader
Please note that in the cid there are 2 underscores before 001.
b. For branded devices such as Vodafone.
Code:
fastboot oem writecid VODAP001
fastboot oem lock
fastboot reboot bootloader
You can even change that CID to HTC__001.
Once you have achieved S-OFF you can change your cid back to original.
Click to expand...
Click to collapse
After this from ****Unlocked***** now i have this *****RELOCAKED****** Security Warning !!!
Now i can't use recovery , but before i was easly in recovery with one click (clockwordmod) , now i can't join in recovery!
On my screen i have this :
****RELOCATED*****
****Security Warning****
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.007
Radio-11.25.3504.06_m
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
May 22.2012.01:06:07
Click to expand...
Click to collapse
Before all this i tryed to install http://forum.xda-developers.com/showthread.php?t=1277431 so i wipe evrything and format evrything so now i dont have backup or some other os , now i am stuck at bootloader and i can't fix , PLS HLP ME TO FIX THIS I DONT HAVE money to pay in service .. Pls hlp , sry for my crapy eng. i am trying rly hard!
TNX
saky90 said:
I will try to explian what i did , and if u can hlp me pls .. I buy htc evo 3d from some guy on internet , phone was perfect evrything was wokring till 2 monts after i try to start wifi he write error , then i try to put new android rom on phone .. And i must say i am noob in all of this , so i try this thing 1st
After this from ****Unlocked***** now i have this *****RELOCAKED****** Security Warning !!!
Now i can't use recovery , but before i was easly in recovery with one click (clockwordmod) , now i can't join in recovery!
On my screen i have this :
Before all this i tryed to install http://forum.xda-developers.com/showthread.php?t=1277431 so i wipe evrything and format evrything so now i dont have backup or some other os , now i am stuck at bootloader and i can't fix , PLS HLP ME TO FIX THIS I DONT HAVE money to pay in service .. Pls hlp , sry for my crapy eng. i am trying rly hard!
TNX
Click to expand...
Click to collapse
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
saky90 said:
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
Click to expand...
Click to collapse
Hey just calm down, I had the same problem. And i cant return to stock etc. So were stuck with rooted evos
Firstly to solve your recovery problem you'll have to re unlock your bootloader. NOTE you might have to reflash recovery
That's it really, I take it you'll know what to do from there... Such as the possibility of flashing a rom
Say thanks if I helped at all
Just send me a message if you ever need anymore help
saky90 said:
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
Click to expand...
Click to collapse
Just simply flash original ICS ruu file from here http://www.androidfiles.org/ruu/?dir=Shooter
run on pc and folow steps.