--------------------------------------------------------------------------------
wenn i will my xda the new rom upgard
i receve this message
error 011 execute remote comunication programme erreo
i have the xdatols send to my sd backup
ihave allways the probleme
i need your help
thanks for all
Related
Just tried to install ezwap2.5 on my ppc2003 XDA and it won't have any of it.
Install prog comes back with "incompatable device".
Can anyone help :?:
Dear all,
my xdaii from1.52.00CHT 10/23/03 1.08.00 1337.18 1.52.118)
used "Xda_II_Upgrade_v16050.exe" update to Eng. ver. but it death at:
Stage1:Earaing Rom image. please wait.... my xda2 now show "USB v1.06" only. I tried meny version to re-upgrade, but it show "ERROR 100: MODEL ID ERROR 1-N-PH-PH-PH"; and I create a sd card image from my other working xda2(1.52.00CHT, bootloader v1.03) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", wait a few time it show "SD Download Section=1 No allow update!".
Can any body to help me ?
thanks a lot !
kaceda
Upgrade
Try with 1.72 ROM
It seam to be the only one that you can put on your device when you have PH-PH-PH error.
Hope these healp you.
Regards.
MODEL ID ERROR
Dear Gibbo,
:lol: Thanks for your reply, but I tried run "ruu172104wwe_t_mobile-uk.exe" it show "ERROR 120: COUNTRY ID ERROR 1-1-3-3-3" and run "ruu172126wwe_imate.exe" then it show "ERROR 120: COUNTRY ID ERROR 1-1-8-8-8".
Thanks & Regards,
kaceda
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=
kaceda have you fixed your devaice with above link?
I haven't.
Keep trying with the 1.72 ROM and change and/or delate Country code, Langage and ID Model.
Good look! and Ciao.
How To update ExtRom ?
I create a sd card image from my other working xda2(1.66.00wwe,1.08.00,1.66.165, bootloader v1.06) by a terminal program via seiral cable type 'd2s', insert this sd card to death xda2 and put xda2 to "Serial v1.06", press power buttom,wait a few minutes, it show "Checksum OK". Gread !!! I did a hard reset, It work !! But some application show disorderly code, i check it all version, it show (1.66.00wwe,1.08.00,1.66.174,bootloader v1.06), So I think this way update CE rom only n ExtRom(Chinese ver.) did not change.
Any body can help me how to update the Extention Rom only?
Meny thx Gibbo n cairo31male n all !
Regards,
kaceda
To update the extended ROM the EASY way:
1. Just copy all the contents of your working XDA's Extended ROM to your PC via ActiveSync or to an SD card,
2. Delete all the files in the Extended ROM of the device you which to upgrade,
3. Put the files you copied in step 1 in the empty Extended ROM.
4. Hard Reset.
That's it. You will have the desired Extended ROM, and you will notice that the version will have changed.
In case you do not know how to access Extended ROM through ActiveSync or File Explorer, have a look at the following post and download the ExtendedROMUnlocker.arm.CAB:
http://forum.xda-developers.com/viewtopic.php?t=8422&highlight=
update the extended ROM
Thanks cairo,
But I wish reflash wwe version ExtRom to xda2, hard rest xda2 the ExtRom not change. I tried usd HimaUpgradeUt to flash ms_.nbf into xda2, but many many times all failed, do you know how to used SD card method to dump ExtRom from xda2 and reflash it to xda2? CE rom have been worked ! how about ExtRom ?
Regards,
kaceda
Hi All,
I am a newbie when it comes to flash my XDA II. With respect to my question, I searched all over this forum, but could not get the solution that is working for me. May be I got confused between different procedures for different ROMs.
Earlier, I tried upgrading my XDA II from PPC 2003 to WM5. While doing that all I did was took a backup of my origional PPC 2003 ROM using XDA OS Image Tool from XDA Toolkit. That is the only thing I have - ROM.nb1.
I successfully upgraded to WM5, but now started getting too meny warnings about Low Storage Memory. Frustrated with that, I decided to go back to where I was - with PPC 2003.
While doing so (downgrading from WM5 to PPC 2003), I used XDA OS Image Tool to write earlier created ROM.nb1 to my XDA II (with ActiveSynch 4.2 connected). OS Image tools shows copying the file and the first error comes up -
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. error getting devicedata
After that prgramme a v1.09 comes up say to hit next. Once I go through the couple if next buttons I get a second error -
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program. Please make sure that the USB/Serial Cable is properly connected.
The cable is connected and activesync works normally.
I would like to mention here that while flashing my XDA II, all I have is earlier saved .nb1 file.
Am I missing something here ?
Please guide me.
Thanks in advance,
Bhushan.
I have got SPV c550, I've changed windows from Wm 2003 to Wm 6 few times, I've used 3 versions of ROM, and I had the same problem on all of them:
I Can't send anything by bluetooth or irda. I can receive data but I can't send it.
I've tried Total Commander and file explorer, but it's just showing an error.
Is there any ROM of Wm6 or even Wm5 that will fix this errors?
p.s.
sorry for my english
nie wiem Pawle w czym tkwi problem. ja tez go mialem ale mi pomogl wlasnie total commander
Yeap
I've been having the same problem too! I'll let you know if I ever find a solution!
TC wysyła, ale tylko do "normalnych" telefonów. Nie mogę nic przez niego wysłać do żadnego SPV
I can send and receives ～
I used kingson's 1122 ROM.
But it's noly Chinese Language
U can link this :
http://www.ioicn.com.cn/forum/thread-243465-1-2.html
Click to expand...
Click to collapse
username : ming12
password : wmhmily3
It is my ioicn ID, I do not know if you can open that page. Whether or not to support Chinese characters
I am also sorry for my English.
I used googlr translator:
Code:
kingsen第三版自用版--豪华集成版:
Kingsen version of the third edition of their own - luxury integrated version:
Code:
http://www.isload.com.cn/store/zqa8pgjpggmcc/5x6_WM6_kingsen_V3_USED.rar/downlaod
I don't speak Chinese,are you talking about this ROM?
I used this bin.
But too many do not have access to integrated software, that comparison wasted space.
Try using moBlue, it works for me.
1) is BT working with all phones?
2) is IR working?
3) How can I get this moBlue rom?
4) Is bloetooth working in WM5 for c550?
Haven't tried BT with many phones - works with SE, HTC and Samsung.
Havent tried IR, but i suppose it works. Nobody had complaints.
MoBlue is software, not ROM.
I think there is no stable WM5 for Hurricane (C550)
So you can saend files by bluetooth to other smartphones?
My problem is that I can't send anything to other SPV, I can send files to "normal" phones by Total commander, but it's not working with smartphones.
I've installed moBlue and I don't think so it will help me:]
IR is not working at all in all the ROM's I tried, I,ve got error telling me something about "function socket"
p.s.
Again, sorry for my English
Problem sloved!
You've got to copy file manager from WM5, Bluetooth is working with all devices, even smartphones.
I'll upload files leater.
how did you do this?
is there any way to copy file manager or "album" from 2003 in WM6?
edit: i don't know the wm5 manager - but the wm6 haven't got some functions who the 2003er manager have!
Put files intu your /windows directory
http://rapidshare.com/files/77435167/Pulpit.rar.html
it worked for me!
p.s.
I don't know what functions WM6, WM5 or WM2003 have because I'm using Total commander
ok
is there any way to use 2003 File Manager and Album in WM6?
edit: you explorer work perfect
need album
pls - upload the album from Wm5
Hi All,
Thank you for such a great forum. I tried to read as much as I can but still unable to solve the problem which I am facing currently.
I had a T Mobile MDA (HTC Wallaby) with the German Language. I tried to install a new ROM but after few seconds of connecting with the PC, the connection was broken and the computer doesnt
recognize the PDA. The only message i see in the screen is
WALLABY
Bootlader
V5.22
GSM OK
my Base ROM is 4.00.33 GER
I tried to cook the ROM with this base ROM and tried the steps ( Flashing with a SD card). I also downloaded the XDA tools and tried to run OSImagetool. Then chose the source file as the one
i downloaded with .nb1 extension. the chose SD card as the destination but i get this error message
"error opening device \\.\PhysicalDrive1 for writing: Access is denied.
error opening target device"
Please help me how i can restore the XDA to its original setting. I have already spend about 4 hours on this but cant get any further
ps. solved the problem.
had to use another Laptop.
dddddddd
ddddddddddd