Hello everybody,
Today I did the installation of CR86_THD_v6.5.0.0.3_Beta, the installation everything was quiet, I did all correct procedures and apparently everything was fine, in shelltool presented the complete message, and asked me to make a HARDRESET, did everything normal, he alloy, shows the bootscreen of HTC, then displays the screen where the version of IPL SPL GSM OS and it freezes, it does not come on screen, I wonder if someone has something that might help me.
He still carries the battery charger when connected to, and I imagine it just a mess because it binds to and usually only appears on the screen that the Qtek logo and the does not that screen TrueColor or it freezes on the screen that informs the version the SPL IPL, but I hope the lay experts help me ...
Thank you.
Sorry my poor english
problem solved
I am with the same problem. How did you solve this? Please help-me.
Related
cingular 8125 got stuck on ipl spl and numbers what can i do please anyone.
When you got the tri-colored screen, it's not bricked.
Do yourself a favour, please read before you act.
Download Original !! rom, and try to install it, don't pay attention to activesync (it won't work when in bootloader).
And please don't start multiple threads about the same subject.
sorry please forgive me, i solved my problem using love rom thank you for replying, i read so much info but not all is very much i might add.
My phone also is stuck
My phone is also stuck with the numbers at boot. How exactly did you fix it? It's not stuck in the tri-color screen but in the boot screen. It displays:
IPL 2.16.0001
SPL 2.16.0001
GSM 2.7.18
OS 2.26.10.2
just press and hold camera button then push reset button with stylus and voilá boot loader screen aka 3 stripes screen (red/blue/green) then just flash the love rom thats floating around here.
note. when connecting to pc in bootloader mode activesync doesn't seem to connect, but when you plug in the usb on the pc you will see the word usb on your phone on the down left corner meaning its connected and ready to flash.
hope all that is understandable, being spanish my mother language or however you spell that.
Maybe this thread already been posted, please help me!!!
I took Qtek S200 used one, and the old host said he had problem with upgrade. I can't upgrade myself, and give it to master, master can't solve the problem, but when I came back and put it to upgrade with "220734 WWE ship" version it did well and I had working device for week, then it freesed once more, since I can do nothing. initially it has IPL 2.09.001 and SPL 2.20.0001, I did the program posted here - IPL upgrade and now I have IPL and SPL 2.20.0001. Phone enters bootloader normally, upgrade only with "220734", others doesn't go. When I switch it in normal mode it freeses as white screen on "Windoes mobile" screen, sometimes it goes further but final picture one - freesing.
Wait for Your advices.
P.S. In my city no official cervice...
Try a different ROM...
Put the device in bootloader,disable connect through USB in active sync, and run the RUU from a different ROM...
hello,
i have a qtek s200, spl 2.20.0001.
i've been trying to hardspl/upgrading to wm6 for a couple of days now.
have tried every possible way i could find on this forum (and others).
tried the kaiser v1, jumpspl, update package, prophet tools, ...
nothing works for me.
i always get the white screen the second i press continue on my device or when i click ok on my pc.
i can hear the device rebooting, because my usb connection gets reactived when i wait, watching the white screen.
after a while i even get my activesync connection back. but always in white screen. when i softreset the s200 i still have the spl 2.20.0001.
i even tried upgrading it to another rom in the white screen and then i get stuck in the bootloader, which means i have to re-install an official qtek-rom.
help me!!! what should i do to be able to use wm6 on my device??
thanks a lot in advance. appreciate it it! a lot!
greetz
never mind ...
followed the instructions on the G4forum and it works (for) now.
sorry. thx for those who read my question anyway.
greetz
Hi. I have searched the forums, but haven't found the answer I have been looking for, so sorry if this is a repeat.
I am working under Windows 7, installed VMWare and XP Pro on it, and easily installed Hard-SPL and Cracings 6.5. When I went to upgrade the Radio, I was sure to download one without SPL and IPL. I tried to upgrade, but it hung at 2% for at least 5 hours. (I knew it was bad in 2 minutes actually, but decided to wait). Now it will turn on, but to the tri-color boot screen. Tried hard reset (although I didn't really expect it to work). Is there anything that I can do? It shows when I connect it to usb, both on the phone and on the computer.
It is FAR out from under warranty, so thats out, but if there is anything I could try, I would be much obliged for pointers. Thanks a lot!
-Jotek
You need to make the update with RUU 2.5.2
( http://forum.xda-developers.com/showthread.php?t=314952 ).
Try it, if even that does not work (for me it works only with wizard_love ROM
( http://forum.xda-developers.com/show...293480&page=21 loca's post), but not with other cooked ROM's) then you can try WST wizard service tool
( http://forum.xda-developers.com/showthread.php?t=329170 ) to unpack the nbf and load only the OS ROM.
Thanks for the info.
I will try it later this weekend when i get time! (moving to new apt.... sigh... can't feed the addiction)
-jotek
If Tri Colour Screen WST needs to boot into WM OS surely???
How can you use WST if only on bootloader. Please explain as I have similar issues...
Dilbert
I had exactly the same experience as you: Hard-SPL followed by Cracing and then the tri-color screen. This thread helped me revive my G4.
http://forum.xda-developers.com/showthread.php?t=442126
Hey I am having the same problem but with my G3 att 8125. I flashed to 2.26 which I always do before installing any rom then installed X2A Haseebs Iphone Killer and it stalled at 57% for over an hour so I unplugged it and hard-reset it. I have installed this rom about twice and it works fine. Now my phone starts up and goes straight to the Tri-colored bootscreen. When I plug the phone in it displays that it is connected via USB but the computer doesnt recognize it. IPL 2.26, SPL 2.26 as displayed on the screen. PLEASE HELP!
Hi all, I've got the exact same problem as Quadzilla has - any help would be much appreciated!
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
mahi58 said:
Hi everyone.
I tried to upgrade my i-mate Jamin to WM 6.5 using this file.
I think I did everything right (I checked the G4 and HardSPL in the beginning of installation and I'm sure my MB is G4).
Everything was going perfect and the installation advanced without any problems, but at the end my Jamin was stuck in the three color screen, showing only the following words:
IPL: 2.13.001
SPL: 2.13.001
I tried to hold the Comm Manager and Soft Reset buttons as this topic recommends, but the phone gets back to the 3 color screen again, and no success...
I tried to pull out and reinsert the battery, also no success...
Please help me, this is my friend's phone! I AM SO NERVOUS and I may kill somebody!
Is there anything I can do to get rid of the 3 color screen?
Click to expand...
Click to collapse
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Thanks
bikertibi said:
Please don't panic! If you see when connect the phone to the computer and USB message on the bottom of prophet screen update is posible. So try to put original WM5 on the phone. Read dioxda2 post for more. For sure you don't hardspl your phone before flashing....
Click to expand...
Click to collapse
Thank you very much, my problem solved using the WM5 flashing process.
I thought it's impossible to get the phone connected to PC because activesync wasn't establishing a connection to the phone, but obviously I was wrong.
After flashing WM5, I performed a HSPL on the phone, and then used the file again, and the phone was upgraded to WM 6.5 with no problem.
I previously had downloaded your 6.5 ROM from a crappy forum, which was only including a download link and some useless info, and since I was a newbie myself D), I didn't even know that I should have performed a HSPL before upgrading the OS.