Hi all,
I've a problem with my QTEK 9100.....the 2 speakers mounted in the sides of PDA are broken. Where can I find these? I've searched on ebay, but there aren't...Plz help me! Ty
Last year i bought a pair of them from a Hongkong based seller on ebay
This is his ebay ID e2_shop ([email protected])" & the price was also reasonable.
you may try to find him
Does anyone knows that speakers from moto E1 fit into Wizard?
i would like to suggest the following - but only incase if you cant find the original & and you have skill or you could find someone with the same
1. Buy a good quality Earphone
2. Dismantle the Earbuds open up the speaker part.
3. Remove the connected wire by desoldering & take out only the speakers no plastic parts .
4. Get speakers from your Wizard.
5. Desolder the connecting cable from it
6. Solder the connecting cable to the speakers you took from Earphone.
7. Place them inside the Wizard & connect to motherboard.
8. Since this speaker will be round in shape ( no flat at top & bottom) you have to make some space to fit by cutting some ribs of the back cover.
it works perfectly - its from my experience.
the eBay seller above I also purchase my stuff from them, they have rare parts for alot of phones. try asking if not listed, they might have them or get them in for you.
e2_shop is a good shop, I've personally bought some little things (crystal clear cover? or something like that)... VERY great prices
Related
hi everyone
ive just bought myself a XDAIIs pda, ive set up TOMTOM 3 sat nav and have bought a BT TomTom GPS receiver. sat navs working perfectly. but got one BIG problem, i cant find myself a decent car kit. ive tried the Arkon CM531, didnt like it-too many wires and very messy, got carkit with fixed charging through the cig-lighter- did not fit my phone as cradle was for XDAII.
Im really stuck so could anyone please help me. im looking for a car kit which will allow me to slide my xda2s in and out easily, hold it in place and also charge it at the same time whilst its in the cradle.
ANY SUGGESTIONS
Same here ! I could not find anything decent. Any suggestion welcome !
xda2s car cradle
did you find one ?
I GOT THE ANSWER
GOOD CAR CRADLE
TRY
WWW.ARKON.COM
CHEERS
VENKAT
Try www.brodit.com, they produce a few different versions ie. power, power/gps or passive. there not bad looking either!
How do you deal with the Arkon RF/speaker interference?
venkie9910,
sorry for repeting my question, but I did not go an aswer yet:
I read here that it was unacceptable...
http://forum.xda-developers.com/viewtopic.php?t=13654&start=0
how do you deal with it?
Thanks,
Chris
I got the brodit one from handnav with a pro-clip and it fits perfectly and looks good (once you've removed the tacky brodit sticker). Only problem is that the hard-wired version isn't available for the PDA2K yet and the cost! A bundle including the clip, holder and charger set me back £70, but you pay for what you get.
Hard wired one is now available with or without gps ps2 port, I have just ordered one with gps, cost £59.99 plus p+p, the pro clip for fitting to the dash cost £15.99. hopefully it will arrive next week
Hi all, I have this Bordit 849582 for sale: http://w3.easytrade.net/brodit_shop/product.dip?item=1225583&fid=1225727
Just buy yourself a Rikaline GPS mouse . Attach it in your car and slide your Qtek 2020 into the cradle and start navigating!
Interesting? Mail me or just reply!
I think people hurry into buying a bluetooth GPS which leaves them with only a hardwired option for in-car. (some exceptions with multiple bluetooth capability) I prefer the inverse combination. If you're using your nav software you need to see your phone so its going to be in a cradle anyway. If you just pop down the shops you can leave your phone in your pocket and your bluetooth carkit still works.
I'd go for a cradle with GPS built in, or a connector for extrnal GPS. Preferably powered (battery hungry these PDAs!) then BT carkit.
But be careful with carkit choice. Some have the awful echo problem. Can't add much more than that except that an M2000 and Nokia CK-7W is NOT a good combination :-(
There is a decent carkit coming that supports talk function and wired GPS. It is already available for the 2020 and its coming for the 9090. It`s based on a CMPC Carcomm cradle. If everything goes right it should be released next week. I will buy it definatly and will keep everybody posted.
TomTom Car Mount for XDA IIs / MDA III / SPV M-2000 etc tec
try this - can be hard wired or use ciggy lighter connection....
http://www.pdamods.com/proddetail.asp?prod=A11XDA2SMNT&cat=23
regards
Alan
Cheap and Effective Magnetic Mount
Hi,
how about trying a magnetic mount?
http://www.tangshop.com/magnetic-cell-phone-holder.html
Cheap, effective and neat (inconspicuous), but you have to stick the metallic mounting plate onto the back of your PDA (somewhere in the middle, preferably on the battery). Fortunately, the sticky pads are from 3M so they are strong and the residue can be removed with normal dabbing of scotch tape. The metal plate is thin so it does not affect the fitting to existing casings.
The part that sticks to the dash is using the same adhesive too.
I've tried this with a Bluetooth GPS and the XDA IIs on the dash, and the magnet is strong enough to hold the PDA in place even through fast corners and bumps ...
Cheers,
David
Another option is from this company:
http://www.thb.de
However I couldn't find a picture of the cradle.
I have however seen the cradle in the flesh and is it very very nice... even has DSP processing for the handsfree.
It is very pricey though.
Forgot to also add this link.... has a few pictures
http://www.ptp.net.au/s8_cradles_XDA_Imate.html
I do not know if they have one for the tom tom as I do not know what a tom tom is, but ProClipUSA.com has some great PDA holders for the iMate PDA 2K
Raptor
My Seido Audio Adapter cable is starting to go out on me, almost made it for 2 weeks. The ends on this cable aren't 'molded', meaning the cable itself is inserted into each end, instead of being part of the piece of plastic they feed into. Day-to-day use has provided just enough tugging to loosen the connections and now the audio stutters, or goes off on one side and I have to jiggle the adapter cable to get it back.
Anyone find a higher quality version with molded ends so they don't work their way loose inside? It's not mentioned in any descriptions of others I've found, and you can't really tell from the product pictures. I've just ordered a Smartphone Experts one and am hoping for a bit more mileage, but, can't tell if the ends are molded.
Hi, this weekend i got my t-mobile version of the Diamond2, named as the Compact V. The design is different from the Diamond2, unlike my previous phone (Compact IV, t-mobile version of the diamond) the design is in my opinion worse than the original... It's all black, no metal finishes and gives a more plastic feeling. The most annoying part is that they placed a little removable cover at the bottom where the mini-usb port is placed. You always have to remove the cover to connect an cable.
This will give problems using a car cit; it won't be possible to slide it in becouse you first have to open the cover, after that it will be in the way...
At the sides of the usb port you can look 'inside' the phone, it's not closed at the sides so i find it tricky to remove the cover as all kind of dirt and dust can get inside the phone...
Does anybody have an solution for this? I looked at ebay for replacement housing but that only will cost me about €50, and i'm not sure if all the buttons will fit exactly...
Interesting! Searching for a Car Kit too (and some solution for the USB-Cover)..
BTW. this cover also makes it nearly impossible to use my stylish HTC-desktop-cradle..
This Design wasn't the best idea from T-Mobile^^
i just sent t-mobile a question about this issue. They chose a strange solution in my opinion. The compact IV looked a lot better than the original, and now they come up with this plastic cheaper looking phone, with holes at the side of the usb port... strange design.
Your're right dude! You speak out what I think^^
ok, now that's two of us... I'll await the reaction from T-mobile
Hey Hellboy.
What do you think, could this fit for our devices too?
I bought a car cradle designed for the Diamond1 for my MDA Compact IV and had to modify it a bit to fit my device... Do u think this would be necessary here too?
It's not what i'm searching for, i can buy an universal car holder everywhere... The active car kit i bought from Adapt for my mda compact IV worked perfect; voice and navigation commands come over the speaker and the phone is charged while in the holder. The same kit exists for the diamond2, but with the compact V we have the bloody cap...
http://www.adapt-mobile.com/mobile/detail.php?p_id=504
The one I posted is for Diamond2 only, not a universal kit.
Think I will try one for Diamond2 and test it for my MDA c V^^
[edit] I've bought this one.
Got the same for my MDA c IV and was very satisfied!
looks good, but still lacks the possibility i seek; hands free car kit and charging. Just slide the phone in an you're done. The one i posted has all these options, and worked fine on my compact IV...
Hey Hellboy,
did TMob ever answer your question?
Just curious... as I am also struggling to find a matching mount for my CV.
thx
Nope,
Never had any reaction... Great service!
If there is such a thing - could anyone point me to a car-mount for the T-Mobile verision of the Topaz?
I am actually looking for a simple mount - passive - no extra joints or windsheeld mounts. BUT as I seem to be very unsuccessful I would be happy for any link to something I can 'work with'
Just bought one 'specially made for Comapct V' which turned out to be a Topaz mount also ... seller says 'there are none - just be sure to use it in portrait mode - it fits good enough - or use a universal one'. Don't know if I will try to modify it or send it back ...
Any help appreciated!
the compact V has the problem of having the cap in front of the usb-jacket. No way you can use an activge carkit that way, the cap sits always in the way
I'm not looking for anything active...
Just sent the topaz-mount which was sold to me as a compactV-mount back today. Although the shop said 'they will never build one' - "Herbert Richter" replied that it will be available!
I did order it in a shop they recommended and hope to get it soon.
I presume the passive holder works equally well, but I am using the Brodit 512011 holder for my Compact V. Just swing the usb cover to one side and it connects to the active holder OK:
http://www.brodit.com/productinformation.jsp?anr=512011
Keith
I bought this one !
I bought this and it works a treat.
http://www.handtec.co.uk/product.php/188/herbert-richter-pda-smartphone-grip
Had the plastic moulded one for my MDA Compact IV so just bought this and mounted it on the same holder.
The little pins at the bottom slide back and forth so you can position them to have access for USB charger and also the annoying USB cover.
Hope this helps
Martin
Using Brodit passive holder incl. special screwless mounting for my car. Better than all standard holders.
Hi everyone,
can you recommend me a good sturdy car holder for the Xperia Neo? I have bought this one http://www.dealextreme.com/p/universal-car-swivel-mount-holder-black-81053 as it had positive reviews, but the holder is really useless. The swivel section does not hold in place at all, so after several minutes the phone starts facing a direction where i cant see the display.
Basically i need the following:
- holds phone from 4 directions
- does not cover any of the buttons (incl. volume buttons)
- does not cover the loudspeaker
- can be turned horizontally
- (ideally) can be mounted on dashboard as well (my car has the lighter connector way to far from the windshield).
Well I'm searching a car holder too but I can't find anything that please me. I'll let you know if finally I found something worth to buy!
so far this is the one that looks the best, but 20 eur for a noname car kit seems to much for me... http://www.ipshop.sk/sony-ericsson-...p-2000.html?osCsid=ctachbj3vmfhjumbgagr828l45
I can't see your link but 20 € is really too much, I don't really use my phone as a navigator every day...
I bought one for 5 dollars but the only issue I have with it is it covers the volume buttons. Would like to see a good car holder for this phone too.
Sent from my MT15i using XDA App
There is the clingo http://www.amazon.co.uk/Clingo-Univ...P9A2/ref=sr_1_2?ie=UTF8&qid=1317411036&sr=8-2
I read good things about exomount, and i think i'm going to buy this one.
But it will cover volume buttons.
joachim1 said:
I read good things about exomount, and i think i'm going to buy this one.
But it will cover volume buttons.
Click to expand...
Click to collapse
looking at the design of the exomount i am afraid it will not only cover the volume buttons but will also permanently keep at least one of the pushed... it seems to be overpriced as well. but anyways if you decide to get one please share your experience
With my current (cheapy) holder the phone is a bit hard to get into place and if i center it, it's touching one of the volume buttons and always playing around so I have to put it off-center which, when driving can make the phone jump around a little. hope to find a better car holder soon.
molnartibor said:
looking at the design of the exomount i am afraid it will not only cover the volume buttons but will also permanently keep at least one of the pushed... it seems to be overpriced as well. but anyways if you decide to get one please share your experience
Click to expand...
Click to collapse
I just bought this on ebay for 26.94 USD
When I have it I will let you guys know if it's good for the xperia neo.
molnartibor said:
Hi everyone,
can you recommend me a good sturdy car holder for the Xperia Neo? I have bought this one http://www.dealextreme.com/p/universal-car-swivel-mount-holder-black-81053 as it had positive reviews, but the holder is really useless. The swivel section does not hold in place at all, so after several minutes the phone starts facing a direction where i cant see the display.
Basically i need the following:
- holds phone from 4 directions
- does not cover any of the buttons (incl. volume buttons)
- does not cover the loudspeaker
- can be turned horizontally
- (ideally) can be mounted on dashboard as well (my car has the lighter connector way to far from the windshield).
Click to expand...
Click to collapse
I bought this one http://www.dealextreme.com/p/universal-plastic-car-swivel-mount-holder-with-suction-cup-for-cell-phone-gps-black-81246 cause I'm also using a TPU cover on my Neo.
But you could also try this : http://www.ebay.nl/itm/260770628331?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
it should fit the Neo.
Last night, I ordered the Neo on Amazon (anxiously awaiting arrival now
While I was at it, I looked around for a car holder. I ordered this:
amazon.de/gp/product/B005EXHJ66 (Saugfußhalter = the suction thing). As I just ordered it, I don't know if it's really good - I'll post again when I have it.
It seems like it's not too ugly (I hate these 'universal' holders - they are way too bulky), and one can order extra parts to mount the phone on a bike or on the car venting holes too (search the site for Haicom and you'll find these). That also means one can just mount another bracket (for another device).
It's also available on Amazon.co.uk under another name: amazon.co.uk/dp/B005F2U32S (lot of pictures there).
While I was searching, I also came across something that can be attached to the screen or placed on the dashboard - like the topic starter asked - but I don't have the link for that anymore.
Regarding the Clingo: I considered that too - but then I read some reviews which said it left residue or the phone falls off under some temperature circumstances - so I didn't dare to try that one anymore.
I have a media that is installed on the grid certral the air outlet, it took two years and I have taken this stand Nokias, LG, Samsung .... all perfectly anchored and comfortable
I bought it at The Phone House and has never given me problems
joachim1 said:
I just bought this on ebay for 26.94 USD
When I have it I will let you guys know if it's good for the xperia neo.
Click to expand...
Click to collapse
Ok, so i got it today and it doesn't press the volume buttons.
Can recommend Griffins universal holders.
Doesn't block any buttons, ok price but if u want to charge in the same time u need to be careful with the cover. But it works
I use a generic iphone car holder from the carphonewarehouse, my neo fits it lovely.
I bought this, and still wait to receive it
it looks nice
http://www.ebay.it/itm/400214065385?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_2813wt_905
in your opinion, car vibrations can cause problems to the phone? can brake?
It´s expensive for me 20€+shipping cost!!!!!