Related
Help please!
I have an T-Mobile Ameo (also known Athena X7500) and i tried the Olipro Unlocker, but the installation didnt finish, at 59% stopped. After that i turn off the device, then turn on, but my device still have a 4 colour screen,red, green, blue and white, it doesnt boot the Windows Mobile, just have the installation screen...
please help
Use olipro's tool again and then flash your final ROM
i tried it many times, but since than my Athena X7500 was dead, the Olipros unlocker doesnt work. The program said: "The Update Utility cannot connect your PDA phone"
In bootloader (coloured screen), does it say anything? if so what? when you try to flash a rom or use unlocker do you get a code? is your memory card out of the slot?
I took a photo my bootloader (coloured) screen:
http://kepfeltoltes.pirateclub.hu/pics/20090106317.jpg My device doesnt say anything.
When i used the unlocker, i didnt got any code. And my memory card was in the slot.
I also took a photo what the Olipro's said now, if i try to continous the flashing:
http://kepfeltoltes.pirateclub.hu/pics/20090106319.jpg
Have you tried flashing your carrier's original Rom?
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Thanks a lot, my athena is live again, i flash my original rom!!!
But the Olipros Unlockert isnt working, the installation go to 100%, the program said that the flashing is succesfull, but my SPL is still 1.1, and i cant flash any roms..
I can understand why. Any ideas?
The other thread was closed, you shouldn't double post.
Read the links I mentioned.
as in olis first post
"Please note: you must have .net Framework 2.0 installed with the services packs, if you don't it then it probably won't run till you download it.
SPECIAL INFO ABOUT STEP 2: When you run this step, first your device will be flashed; this is NOT the end of Step 2, you must then configure your device and set it up fully so you can access the menus etc (there will be a prompt to ask you to do this after the flash anyway). then you will be able to continue. please make sure to read ALL dialogs fully"
leave out the sim and sd card.
Some others have reported better luck with the shipped WM6 rom if they had trouble unlocking.
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
VorosAdam said:
I installed the NET Framework 2.0 SP2 in my device and i put out my sim and sd card. And when i flashing the Olipros Unlocker, it went to 100%, but my SPL is still 1.1
I dont understand.
Click to expand...
Click to collapse
the net framework should be on your computer.
what OS is on your computer ?
May be better if you use winXP
did you install an oficial wm6 rom ?
Read the later pages in the unlocker thread
My computer also have the NET Framework 2.0 SP2. And when the flashing didn't work, i also installed the NET Framework 3.5 SP1, but, when i flashing a ROM in my decive, it also went to 100%, but the SPL is still 1.1.
I use a 32-bit Windows XP in my computer.
My T-Mobile Ameo (Athena) is a second hand device, it was used when i bought. But the first user said me, that the original OS was the Windows Mobile 5 in my Athena, but he update from Windows Mobile 5 to Windows Mobile 6.0. He said that he update with an official T-Mobile way.
Ok all good so far
Did you use the unlocker from this thread?
http://forum.xda-developers.com/showthread.php?t=315831
The other thought i had was that you should try a different computer and usb cable
oh, thank you so mutch, i tried an another computer, and it flashed the SPL from 1.1 to 1.2!
thanks again
my htc advantaage x7500
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
sheizi said:
hello myfrnd please help me as my phone is dead after i used ur rom upgrade 3.5, i was already using michy cooked version of window mobile 6.1 im new in this field and during upgrade process after going 92% it just stuck and and showing 3 color screen it has a msg of IPL 1.2 OLIPRO pls help me i will donate u if u could solve my problem
thanks
Click to expand...
Click to collapse
I saw someone with the same problem as you here awhile back and he was able to fix it. So keep your post alive or read the sticky post under the Upgrade section. I believe that was where I read it.
dead X7500
Hey Im also a sufferer of a dead X7500......this all happened wen I was trying to flash my ROM which was using a SPL !.20 OLIPRO
wen I try to re flash the device , it starts a stops at 1% and follows an error msg !
plzzzzzzzzzzzz help me out to solve this prob !
regards!
VorosAdam said:
i will try it, but i dont know where can i find my original rom...
and my second biggest trouble: in this mode, i cant charge my batteries. If i dont find an solution this problem soon, i think, my device will be a BIG trouble. Grrr, i hate olipros program...
Click to expand...
Click to collapse
I have the same problem would be kind and tell me how you solved the problem.
[email protected]
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
Hi all
Rather than hijacking other threads I thought it might be of help to others if I start a new one.
Having spent hours trawling thru the other threads I have now concluded that I need the help of one of the wise sages such as Cmonex or Olipro.
I decided that a thread might benefit others rather than just pm'ing them.
Ages ago i bricked my ameo.
I had upgraded to spl 3.5 and had been playing with one of michy's roms. Whilst the rom worked fine the boot-up splash screen had become corrupted, I also noticed that the camera had stopped working/initialising.
In an attempt to get the camera back I tried various other roms and decided to downgrade to spl1.2 so that I could go back to a stock rom. In a moment of stupidity I accidentally tried to reflash using a spl3.5 rom.
This resulted in a invalid model id message.
In desperation I did the old vol key down and reset pin. Told the ameo to restore.
From that point onwards the unit is no longer recognised by my pc, in the tricolour boot screen it initialises and says loading 0058002 and then displays
IPL-v1.00
SPL-v1.20 Olipro
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Pdajoy kindly suggested using a mini sd card to flash the unit. I purchased a micro sd with a mini adapter. Formatted the card to fat32, renamed the ndc file booted to the tri colour boot screen and hit reset. All that happens is that is tries to boot the old fecked o/s and gets as far as a blank grey screen and no further.
I really do miss my ameo- the screen on my touch pro is just too small!!!
Any help will be greatly appreciated.
Thanks
Hope is a typo error here, should be
"rename the RUU_signed.nbh to ATHEIMG.nbh"
Did you removed your SIM card before applying?
Sorry my bad for not warning you in advance.
Grey screen, you mean no text at all. Total blank grey?
Am just curious.
hi Pdajoy
I had renamed the files ATHEIMG.nbh, the reference in my post above is a typo. There was no sim in the phone either.
The screen after it tries to load the old corrupt rom is just a grey mass- nothing else, no text or images.
The two pics listed show the ameo booting and then the grey screen.
http://imaginarynumber.co.uk/ameo/IMAG0033.jpg
http://imaginarynumber.co.uk/ameo/IMAG0034.jpg
hi imaginarynumber,
Thanks for the photo.
hey 4.00 on screen, I believe your set is still spl 3.5
If it is my set, I will definitely flash AP4 again.
Best wait a little while for kind sage to drop by with to assist you.
Don't wish to see you bricks yours.
I have the same problem what can we do ?
I found a way to bring back the normal bootloader you just have tu press the reset button then you press the camera button and you will have your bootloader again
IT IS NOT WORKING you get back to the original bootloader but when you want to put back a rom even the official one after 1 percent it gets back to the grey screen PLEASE HELP
Srry athena works again place the mmty tool with mac bin file in the root of c and try again dont forget the task 32 command before the bin command that worked for me
I had the same exact problem (even the screen was the same) and didn't realize that the initial screen that shows up isn't the bootloader. fixed it by waiting for the grey/white screen, holding the volume button down then reset button and camera button + reset which brought me to the actual bootloader. From there I installed the latest AP rom, updated my radio and installed mitchy's 6.1
Big problem: Mac Address? Still getting dark screen and blue stripes!
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
You need to flash a rom
puffo said:
Hi, I have follow the various steps above, however I cannot boot my Athena after words.
I am lost! I have followed exactly the steps:
1. disable activesync and put mtty into the C:/ root
2. connected athena as usb and booth with 3 colors screen
3. run mtty
4. done the cmk
5. selected port usb and created the .bin file for my SPL (1.2)
6. in mtty run task 32 and went up to: "code entrypoint unknow"
When I boot again my Athena I get the same dark screen with blue stripes:-(
Click to expand...
Click to collapse
It looks like you did the wifi fixx correctly but the rom is still corrupted
Go into bootloader to confirm your SPL and then flash an spl appropriate rom
cheers
So, how to proceed now?
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
puffo said:
Dear Iakeman, all,
how can I confirm now my SPL and than flash the ROM?
I confirm that on my 3 color band screen I have:
IPL-v1.00
SPL-v1.20 Olipro
So, what is next??? If I just reset or restart the Athena in the normal way I will get back the dark screen with blue stripes and nothing will happen....
Do I have a this stage to install a new VM ROM? But I am wondering if I can do that since not sure that in this mode the Athena can communicate to my PC and so being able to upload on it any ROM....
Click to expand...
Click to collapse
You have confirmed that you have spl1.2 by quoting what you have seen in the tricolor screen.
Get back into that screen , making sure you have removed the sim and sd card and then conect to your computer via the usb cable.
You would have downloaded an spl1.2 rom ( you previously stuffed the radio by trying to flash an spl3.5 rom) and then run the romupdateutility .exe .
then you should be sweet!
having read a reply of cmonex to another post I am starting to think that all hope is lost.
It seems that if windows is unable to recognise the phone it is possibly the case that it is completely f*cked!!!
It would be nice if someone could clarify this...
Which WM to ul now?
Dear Iakeman,
thank you so much for your kind reply. So at this stage I can try to upload to my Athena device, basically, any spl 1.2 rom of WM 6.0, or 6.1 or even the 6.5 beta?). Or I must start with spl1.2 rom WM 6.0 ?
Yes! It works!
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
imaginarynumber said:
I have tried the mtty option, using different computers and different leads, have even tried running the program from the root c: to no avail.
The problem is that whilst in boot loader screen on connection to the pc there is no usb option displayed, nor is there a usb option in the mtty drop-down list.
Thanks
Click to expand...
Click to collapse
just a thought.
Once you finished doing mtty, did you reenable usb in activesync as per this post
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=2
the other thought was is the usb cable and the usb port able to sync with other wm devices? maybe the slot on your athena is faulty?
Hi Lakeman
Thanks for the reply.
It is possible that the usb port is faulty but it seems improbable that this should have failed at exactly the same time as me stuffing up the O/S.
I will try to find the cmonex post to which I am refering later today (the one that suggests that the phone is stuffed).
Tnx
when i type task 32 show this plz help
Cmd>task 32
Level = FF
puffo said:
Hello, after so much pain, I have follow the Cmonex post 33 to fix my broken firmware and now I have been able to upload properly the VM 6.5.
Many thanks!
Click to expand...
Click to collapse
HI PUFFO,
WHICH Cmonex POST 33 R U REFERRING TO?
I M FACING EXACTLY THE SAME PROBLEM THAT U FACED AND AM WAITING FOR THE NEXT STEP.
KINDLY REFER ME TO THE POST SO THAT I CAN START USING MY ATHENA.
THANX
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Please help MODS..!!!
Also tell me how to use .NBH files for GENE I mean is CUSTOM RUU is ok???
& if yes then which of the 6 options is to be selected..!!!
I am using VISTAS...!!!
sugestion
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Please help me..!!!
Click to expand...
Click to collapse
haree said:
hi
as per ur nos giving it is a old gene(SPL 1.10.Olip is for old gene see my sign) my suggestion is
go to the link below download the ROM for OLD GENE also download a new ROM utty besfen ROM comes with the utty u can also use these roms for ur Gene see 2nd link provided i think ur existing Rom utty is corrupted
besfen has also provided original wm6 u can also try that also
good luck
http://forum.xda-developers.com/showthread.php?t=467796 - Krazy ROM
http://forum.xda-developers.com/showthread.php?t=505156 - Besfen ROM
Click to expand...
Click to collapse
Mr HAREE I tried with the "OLD_GENE_ORIGINAL_WM6" ROM but I am having same UPDATE [300] error..!!!
I am trying every ROM available for GENE please guide me..!!!
My cells manufacture date is AUGUST 2008..!!!
Can you tell me which CUSTOM RUU to use for GENE .nbh files & which option of all those is to be used cause there is no SPL1.10.Olip in it & also the CID unlocker for GENE from bootloader cause thats what only I can access now..!!!!
& another thing in "SPL Unlocking Tools-SPL updater-Orefkov"
"wcescomm.exe" in step 4
I am not getting USB in step 6. "Run mtty1_42.exe programm, and press button "USB""
NOTE: - I am using VISTA
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
stupidgye said:
try this
http://forum.xda-developers.com/showthread.php?t=513329
give answer to the program as follows:
step 1 no "1"
step 2 yes "2"
press no in the error message
step 3 no "n"
then mtty application will start, follow the steps thr
Click to expand...
Click to collapse
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
try this
hi
as per the ur spl mentioned and mine is the same so urs is a old gene i hope the numbers mentioned is right now try this
1.off the phone
2.take batter out press the power button for few secs around 3-4 secs
3.put battery back into the phone keep pressing camera button and power on the phone this should get u the tricolor screed if u get it good attached USB cable and flash an new ROM with ROm utty
or
press camera button and restart the phone with stylus this should also get u the tricolor
if u down load the besfenROM it also has the Rom utty with the ROm us this one and not the ROM utty u already have with u
good luck
heartsurfer008 said:
Its not helping..!!!!
I already have old GENE..!!!
MTTY is not working on VISTAS..!!!
Click to expand...
Click to collapse
heartsurfer008 said:
I have ELF & I usually update its ROM
I tried updating my DAD's GENE but now I am stuck...
The phone isnt starting except the BOOT LOADER
In boot loader its showing
ONBL 1.17.0000
SPL 1.10.Olip
I tired all GENE ROMs but its showing UPDATE ERROR 300 [This update utility cannot be used for you PDA. Please get newer Update Utility]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
ankit360 said:
http://forum.xda-developers.com/showpost.php?p=2953612&postcount=2
or meet me at 8pm IST on yahoo or msn messenger pm me your id
Click to expand...
Click to collapse
I am ONLINE, my GENE has started but need your help for updating..!!!
heartsurfer008 said:
I am ONLINE, my GENE has started but need your help for updating..!!!
Click to expand...
Click to collapse
Pls Explain how it could be happent?? does the update process interupted??
use windows XP
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Still messed up..!!!
BesFen said:
1. disconect the usb cable
2. press camera, then reset, release reset but still press camera, release it if the screen show tri color
3. connect the cable
4. if it say found new hardware, install usb driver for vista, it is in the package you download from thread to did hard SPL.
http://www.4shared.com/file/81084740/fa599d63/SPL_Unlocking_Tools.html
5. after the driver installation finish, just run Romupdateutility.exe
Click to expand...
Click to collapse
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
I want to update the ROM, I tired all the ROM roms but having the same update 300 error, My GENE is AUGUST 2008 manufactured & has SPL 1.10.Olip..!!!
So I need a proper CID unlocker & the proper BOOT LOADER UPADTE & RUU..!!!!
Can you help me???
& are you on any networking site cause its easier to communicate..!!!
Facebook : - http://www.facebook.com/profile.php?id=1442055873
Orkut : - http://www.orkut.co.in/Main#Profile.aspx?uid=13511036999101959478
heartsurfer008 said:
Well as I said I tired to update the ROM & I messed up but now used XP & got th e the ROM to its ORIGINAL condition..!!!
....[/url]
Click to expand...
Click to collapse
Is your Gene working at the moment with the .Olip SPL? If yes, then your Gene is already unlocked.
Try any ROM you wish, just make sure that its post says that it is for "Old Gene". You may try a lot of Good ROMs from this forum, I can't suggest you any specific since its against my principle.
Best of Luck and happy flashing?
try to flash ur device on that tri color screen
if it is unlocked then it will definitely get flashed with any ROM for old gene, and if their is some problem them u probably have a new gene sso try orekfov method to unlock
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
krazy_about_technology said:
Why in the world people dont want to read the tutorial properly before flashing, dont you guys give a damn to the phone that you purchased using your heard earned money, doesn't it deserve a little bit of your grey matter?.
First of all, there is no problem in unlocking phone from Vista so i request you guys to not spread this myth. In VIsta, you only need to downgrade your activesync drivers to windows xp ones and everything else goes smooth as pie. If you dont even know how to upgrade your pc drivers even after reading the guide and using the helpful driver update wizard that Windows Vista provides, i advice you to stay away from all this unlocking stuff, this is strictly not for you untill you study how driver updating works in Windows. And all this driver updating stuff is written in the Tutorial as a vital step, still people manage to skip it.
Secondly, if you had given even a little glance at tutorial you would know that if the Olipro SPL doesn't works on a phone, it is a new gene and the Orefkov's method must be used. After using that, phone gets alive right on that moment.
So as always, i wont try to help any futher, this is not a kids forum. If you consider me rude, good for you. But i just can't tolerate ignorance of this level.
Good luck.
Click to expand...
Click to collapse
@ krazy_about_technology, sorry but I am not a NOOB, i have updated many ROM's but I am using VISTAS BLACK version by AMIT AGARA so I couldn't
update or technically DEGRADE the ACTIVE SYNC, that is the prob with it..!!!
& I have read the whole tutorial almost 10 times but still it didn't help me...
I have tried all old & new ROMs both using VISTAS & XP but my GENE is not getting updated..!!!
ERROR
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Done that
krazy_about_technology said:
Well try on different computer then. Use an genuine, clean copy of Vista or XP and you will succeed.
Click to expand...
Click to collapse
Do you think I haven't tried that???
I have done it on a CLEAN original valid version of XP but the same prob..!!!
Just check out that "UPDATE ERROR 300", I find that something unusual..!!!
Just see the PIC I have uploaded above this..!!!"
Hmm... Have you tried using the Orefkov unlocker method? What output is it giving? Try doing it after removing the battery, holding down the power button for 15 seconds and then then putting battery back and restarting phone in bootloader mode. I will try to get more info on this in the meanwhile.
Hi,
I tried patching my new gene P3400i direct using Orefkov's method i followed all the instructions supplied like first installing the driver if you are in Vista.. m in vista i did the same ... then switched off my cell removed SD card and sim then pressed camera button .. so on.. tricolor... USB written at bottom of the phone screen then where it was written open "mtty1_42.exe" and Press the button "USB" in the window that opened but i didnt get any window with USB written, attaching the screenshot of the window that pops up after running mtty1_42...
kindly help!!
check your PM.
done with bricking and reviving!! spl patched
thanx alot
Hi Suraj,
did u get a solution for the problem..m too facing the same
rahulbitly1 said:
Hi Suraj,
did u get a solution for the problem..m too facing the same
Click to expand...
Click to collapse
more better you look and follow guide have given by krazy_about_technology ~ http://forum.xda-developers.com/showpost.php?p=3181506&postcount=3
hi rahul go with the steps in tutorial...
first you've to brick your device with olipro then bring it back using orefkov
The device is bricked and i am unable to recover it using the steps mentioned in the guide. It shows the following information on tricolor screen:
ONBL 1.17.0000
SPL 1.10 Olip
Whwn i run MTTY no usb button appears. M using xp for patching the spl.