HI bros....all the tutorials are gr8 however....i just cant figure out what to do...i read all may be 10 times still canot decide...plz help.... when i insert my sd card with 'gene_hspl.exe...this is BY our bro @krazy_about_technology
it just becomes white for a second...so i used the second method .....plz note i cannot use the phone as it goes directly to bootloader mode as i put the battery...
the second methos showed this....
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1DD80000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
i also used Orefklov methos by putting GENEIMG.nbh... however i get... invalid certificate....
my phone is bricked....by somebody...it shows onbl 1.02.0000 spl 1.02.0000
this happens as soon as i put the battery it comes to this screen....
its a gene.... sud i use JTAG Method or ANY OTHER..plz advice
................plz help me.........
You said read 10 times.....
but why you Copy and run the file gene_hspl.exe from your sd card??
The tutorial said t run from phone memory
Read it again...
Step 2: Preparing your phone
--------------------------------
1. Copy the file gene_hspl.exe from the SPL Updater\Olipro folder that you got in step 1 to the phone memory.
Click to expand...
Click to collapse
and it seems that u didnt pressed and hold the camera button.
stupidgye said:
and it seems that u didnt pressed and hold the camera button.
Click to expand...
Click to collapse
bro i pressed camea buton...and did that process 10 times
i have read and i know it sud be used from the phone
however bro i think u didnt read my post carefully it says i cannot use my phone as it comes to bootloader mode as soon as i put the battery...
hence i tried everything....
thx for ur advice.... plz let me know if there is anything more i can do which i have not done....
BesFen said:
You said read 10 times.....
but why you Copy and run the file gene_hspl.exe from your sd card??
The tutorial said t run from phone memory
Read it again...
Click to expand...
Click to collapse
LOL +1 for that
Read the tutorial 11th time
and try this also
http://forum.xda-developers.com/showthread.php?t=513329
just ignore any message which says "error connecting with device"
and whn it says can u see that olip screen enter "no" and thn follow the instruction
Addicted2xda said:
LOL +1 for that
Click to expand...
Click to collapse
my dear bro......didnt i say i cannot operate my mobile..... this was a try by operating from sd card....
i used the orekfov's methos in which u can try from sd card... so just thought of using this also by that method as i cant operate the mobile...
however.... i will try this method u mentioned...
thx for ur advice.....hope this one solves it
stupidgye said:
Read the tutorial 11th time
and try this also
http://forum.xda-developers.com/showthread.php?t=513329
just ignore any message which says "error connecting with device"
and whn it says can u see that olip screen enter "no" and thn follow the instruction
Click to expand...
Click to collapse
bro i tried this also same problem..... any other solution...
i think i better givethis mobile back....to the customer...
if u have any other solution plz tell me....
Your phone's onbl has gone corrupt due to improper usage of gene_hspl.exe. You will have to give it to service center. There is nothing you can do from home now. Dont fear, give it to them, they can resolve it in minutes, or a few days maybe, depending on how busy they are.
While giving it to the service center, do not tell them that you did all these experiments and all. Just tell them that it is not working. The first test they will do is loading the original ROM and testing. And if you are lucky enough, they may even return it the very next day.
krazy_about_technology said:
Your phone's onbl has gone corrupt due to improper usage of gene_hspl.exe. You will have to give it to service center. There is nothing you can do from home now. Dont fear, give it to them, they can resolve it in minutes, or a few days maybe, depending on how busy they are.
Click to expand...
Click to collapse
Bro.. can u give me a suggestion on how u.. conclude that onbl is corrupt...
bcoz this onbl status was there when i got this mobile for repair...
also plz tell me how did i use it an improper way so that i dont use it again like that....
however thx for ur advice.... i will give it to service station....
The onbl number should never change during the SPL patching process. If it changes, it leaves no choice in our hand other than giving the device back to service center or using the JTAG method, which i wont recommend unless you are a hardcore enthusiast with an inclination towards electronics engineering as it requires opening up your motherboard and using electronics related tools to reflash it.
The right way to do it is fully described in my guide. Follow it step by step, giving deep thought to every word that i say. You wont go wrong with that.
Sorry wrong Post....
Related
Hello all.
I was flashing a ROM (VP3G's new ROM) when my USB cable jiggled and became disconnected from the computer. Now my phone is stuck in the tri-color screen.
I have read through some of the unbricking material and have not had any luck. There are many pages which I will go through to try and not have to send my phone to repair.
Here is my info.
Hermes Cingular 8525
HERM100
IPL-1.03
HERM100
SPL-1.11
Everytime I try to check if my phone has KITL enabled, it does not tell me. I am downloading Windows CE right now and will attempt to recover using the PB + KITL method ... but I am hoping to get a little help if possible. The main problem is that my phone will not ActiveSync ... so I cannot try to flash another ROM. Whenever I try, I get a message saying that the computer cannot communicate with the phone.
Any help would be greatly appreciated. Please do not flame ... I am working on trying to fix this myself. I am just asking for a little insight.
Thanks,
Kangle
Have you tried SD Card flashing method?
Have you tried simply flashing another ROM, with the phone starting in bootloader mode?
Are you using CustomRUU to do the flash?
Have you tried a hard reset?
Have you tried mtty - task 28?
Have you tried SD Card flashing method?
This is the only promising thing I have not tried. I am looking for more information about how to do that. Once I find it, Im going to buy a Micro SD card tomorrow and try.
Have you tried simply flashing another ROM, with the phone starting in bootloader mode?
Yes. ActiveSync does not recognize the device, so I havent been able to flash anything. I always get the 260 error. The phone is stuck in bootloader mode (tri-color screen). The phone does switch from USB/Serial when I unplug the USB cable from the computer. It almost makes me think that if ActiveSync was working, I would be OK. But I know ActiveSync does not work unless you have an OS installed.
Are you using CustomRUU to do the flash?
I am using RUUWrapper.exe from vp3g v3(1).62.0_ATT_Full.rar. Ive been reading for a couple hours, so I am not 100% sure if that is what you mean. I have also tried RUU_Hermes_CINGULAR_WWE_2[1].06.502.3_6275_1.33.31.00_108_Ship.exe among others with no success.
Have you tried a hard reset?
Yes ... failed.
Have you tried mtty - task 28?
Mtty allows me to hit the USB button, but the white screen does not allow me to type anything.
*After restarting my computer, mtty started working. I did task 28, and here is what I got.
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 438
Storage Total block: 498
Total Bad Block in CE: 0
NeedToEraseBlockStart: 451
Storage format success
Thanks for your response. Im really trying to read up and figure this thing out. Im trying the KITL method now. I really appreciate any input anyone can give me. Im not going to sleep until I get this thing fixed.
Hope your joking re not getting any sleep. I have done this once and ended up making so many mistakes that the sensible thing was to pack in and get a few hours kip.
Amazing what difference a new day makes in terms of clear thinking and putting a seemingly insurmountable problem into perspective.
Hope you get it sorted.
WB
Well, I wasnt joking ... but I ended up lying.
The phone will go into bootloader mode and now when I reset it, it goes to the splash screen. Everything appears to be fine, minus the operating system. I believe my radio is still intact (1.41.00.00).
Im being optimistic that flashing from the SD card will work. If not, Im really going to start getting nervous. Ill let you all know how it goes. I did find the thread on it, so Ill be ready to rock here in a little while. Im going to hold off on the KITL method, but I have done most of the steps and will give it a go once I try this.
Now Im real nervous. I tried using the Hermes SD card flash with a NBH file, and it does not work. It says "Loading ..." .... then at the top of the screen it says 00068002. I did flash the card using Fat32 and named the file HERMIMG.nbh.
Starting to look like Im going to have to send it in ...
Im going to keep scouring the info ... try the KITL method. If anybody has an answer or can point me somewhere, I would really appreciate it.
Thanks again for all your help.
Kangle
Going for broke here guys. Here is my info.
Model: Hermes Cingular 8525
ROM Before Flash: vp3G v3[1].0.0_ATT
Radio Before Flash: 1.4.30.00
Bootloader Before Flash: SPL-1.11
Flash failed at: 44%
Flashing ROM: vp3G v3[1].62.0
Flashing Radio: Not flashing radio
Bootloader After Failure: SPL-1.11
CID Before Failure: ? Not SuperCID
CID Corrupt: No (?)
Radio Corrupt: No
No GSM Error: No GSM Error
Stuck In Bootloader: No … can get into Bootloader
Stuck On ATT startup screen: Yes
Can boot into OS: No
Tried mtty command set 14 0: Yes … here are results
Write Nand Success
HTCST ÚÈÒHTCE
Tried wiki problem number 5: Appears I do not have KITL enabled
mtty info 2 output: HTCSCWS__001Ùü¤HHTCE
Current Device Status: unusable
I have tried flashing numerous ROMS ... ActiveSync does not see unit, therefore I cannot install. Tried using SD card to flash, but keep getting 00068002 error message on top of screen. KITL method not working.
Whenever I use mtty to hookup to phone, I do not get USB prompt, but I do get Cmd line. And it does seem to communicate with phone. Here is what task 28 shows.
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 438
Storage Total block: 498
Total Bad Block in CE: 0
NeedToEraseBlockStart: 451
Storage format success
***One more note ... I have disabled ActiveSync USB detection. When I reset phone into bootloader mode, I then plug the phone into the computer, which then shows USB in bootloader. Then I run RUUWrapper.exe, and then choose SPL-1.11. It acts like it is going to update ROM, but then it stops at 1% and give error 270 - Image file corrupted.***
If anybody can help, I would greatly appreciate it. Im to my wits end. Im expecting to pay at this point, so if anyone can get me going without sending it in, there will be money heading your way.
Thanks to all those in advance who will help.
Kangle
THE BRICK HAS BEEN FIXED!
WOOT WOOT!!!
I did not really do anything different than what I had been trying before.
I used mtty and did the following.
task 32
task 28
Then I unplugged the USB from the computer, rebooted the phone in bootloader mode, then plugged the USB back into the phone. Then I ran RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe and it worked.
I do not understand why it didnt work earlier though ... I ran other official and unofficial Cingular ROMS and did not have luck. Either it would not find the device, or it would and freeze up on 1% and give me a corrupted ROM message. I really did not do anything different as far as I can tell. I must have though, b/c it didnt work 100 times and then all of a sudden it did.
At any rate, thanks to those who responded with their advice. There is a ton of information on this board and I know alot of people have spend much time trying to help noobs like me. The information can be found if you look hard enough. Use Google to help find posts on here. It helps alot.
Thanks,
Kangle
congrats! glad it worked out finally!
Hi Guys,
I'm from Germany and I have the following problem:
I wanted to flash a WM6-Rom onto my SDA 2 / HTC Hurricane.
I did everything that was described in the tutorial but at one point I have got a problem:
When it comes to opening mtty, I can't flash the Rom.
It says:
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
What to do now?
I have absolutely no idea.
And I would be very glad if somebody could help me to get ANY Rom onto my device.
I'm kind of frustrated right now.
See you.
Timops
it's to small information to say anything.
you must past whole communicates from Mtty (everything)
than we can say something about it
Alright.
Then I will try it again today and post the whole mtty log.
Perhaps you can do sth. with it.
But now I've got the T-Mobile-UK-Rom (WM2003) on my device.
But I really want WM6.
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
lazaj007 said:
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
Click to expand...
Click to collapse
1- I used the cert.cab. I think this is application unlocking
2- yes I did by using SPV-Services
3- I don't know, but I used PatchedRuu.exe (I think this is that)
4- yes I write them myself
I'll try in a few minutes and post the log if it doesn't work.
But don't hesitate to post any suggestions or information.
BTW: Is my English understandable?
Now this is my log from mtty:
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\ROM.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\ROM.bin"
:F=c:\ROM.bin
start download
SAddress 82040000Hh Length 02C00000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
Update BINFS success.
*checksum = 0, skip checking
Image Download Finish
OEMFlashWrite(83C40000h,8C080000h,01000000h)
Update BINFS offset 0x01C00000 length 0x01000000 ...
Flash BINFS failed.
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
I think I know where the problem is:
I can't get into the bootloader correctly.
When the phone asks me if I want a IU (0) and I press the Zero-Button on the phone, nothing happens.
What to do now?
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
I tried this so often but I don't give up!
I'll try again, maybe I'm lucky.
Who knows?
Where can i get this PatchedRUU ? I have the NBF File but i think a need the RUU program it self, but where to get it ?
here is PatcedRUU http://www.spv-developers.com/forum/attachment.php?attachmentid=65
wrong RUU!!! RUU from above will KILL your Hurricane!!
Above RUU will kill your Hurricane because it for Typhoon.
BTW: I had "CMD55 failed" error when using bad USB-cable... trying another cable made it disappear.
lazaj007 said:
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
Click to expand...
Click to collapse
I have the same problem like Timops...Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I decide to try upgrade SPL..............but nothing...I get the "white background"
now what can I do....? USB connect not working...bootloader not working...maybe jtag?
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
sunnymobile said:
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
Click to expand...
Click to collapse
r u stupid ? who told you to install oref hspl
i request all members of xda forum to not reply this type of post some stupid ppl creating same type of post daily without searching
n y do u use HSPL everytime u flash
n y do u use HSPL everytime u flash
i think this problem can be sort out if we can create the bootloader image of an OLD gene then using it through MTTY with the old GENE SPL image
Anybody knows how to do this?
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
just a suggestion, found this for some other device.
hope this will work with urs too
do it at ur own risk
hey sunit here is that nb fileView attachment 1.10-Olipro.zip
stupidgye said:
hey sunit here is that nb fileView attachment 192772
Click to expand...
Click to collapse
guess its time u changed ur id
Lol yeah, Vaibhav this id doesn't looks that cool yaar And thanks for the Olipro SPL. I will develop the unlocker setup tomorrow.
Its just a login name yaar. BTW can i change it without creating a new profile?
NAAM MEIN KYA RAKHA HAI BHAWNAO KO SAMJHO
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Yes u can change ur id
hi
yes u can what i did is ask a Mod who has become my friend through this Forum
but pls note i had also asked the same friend to make ur SPL cheker a Sticky and the same was done so i don't think it would be right now to ask him again
but ultimately it was done by Flar who is the admin for this forum so i suggest that u send a PM to flar and give a few options for ur id and im sure if possible it will be done good
i too feel u need a Id change and may be u can change it to smartkid as that is wat i would call u
krazy_about_technology said:
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Click to expand...
Click to collapse
After trying for update to windows6 phone starts only on bootloader
hi
is ur HSPL done if not read krazys stiky and do it if done and u get tricolor
just attached ur phone to the comp via usb cable if u get the usb text on the phone just flash any other working rom
goodluck
mirecle said:
After trying for update to windows6 phone starts only on bootloader
Click to expand...
Click to collapse
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Here is log using Orefkov method
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x3CB80000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>
g_cKeyCardSecurityLevel = FF
i think this indicates that the cid is locked if so what is the method to unlock it.
can is use jtag method?
is yes please discuss the method and tools needed for it
I think we need some experienced people to help mirecle out from the trouble
Guys please help ...i don't have that much knowledge about this issue...
mirecle said:
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Click to expand...
Click to collapse
Hi
You dont have any other choice but to take it to service center...good luck
hi
if this is ur SPL : SPL 1.28.0000
u have not done hspl without this u cant flash any roms
u can try connecting the usb cable wile in the tricolor and try flashing a new official htc rom for ur phone if it does not work sorry u need to take it to service
mirecle said:
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Click to expand...
Click to collapse
Hi I too have the exact same problem
Hi my spl too is 1.28.0000 and I tried unlocking by both methods and upgrading by sd card but to no avail any suggestions ? PS I have flashed many custom roms before and know how to do this and have read all the stickys there are.
ankushv said:
Hi my spl too is 1.28.0000 and I tried unlocking by both methods and upgrading by sd card but to no avail any suggestions ? PS I have flashed many custom roms before and know how to do this and have read all the stickys there are.
Click to expand...
Click to collapse
Do u mean u have flashed Custom Roms for Gene before ???
Yes I have flashed custom Roms
Yes I have the gene 4 1.5 years and it came with wm5 and I upgraded it to wm6 and it was unlocked by oilpro but the last rom I flashed it with changed the spl to 1.28.0000 and now I am stuck.
You must have flashed an original rom with SPL \ IPL. So you brick your gene.
hello every body
i was using gene from past 1 year i successfully upgraded by w.m5 rom to W.M 6.1 rom by lomlom(touch flo) for the 1st time than after i again upgraded it with W.M 6.5 rom by sumit's rom successfully but i was not satisfied with the sumits rom so i flased rom and tried to install w.m 6.1 by lom lom again...so again i started to install that, after running gene unbricker my screen is turned into 3-colour boot screen then in next step mtty step was also successful and the w.m6.1 was setuped successfully
but my problem was, when i restart my device im unable to start the mobile directly when i restart only a RED LED was blincking single time i tried to install again but it is not possible
please help out of this..........
Remove battery and press power button sometimes, then put back battery and try to power on your gene. Then try to enter in bootloader mode to flash another rom.
PS. I don't know if I understand well, but before you flash lomlom's rom again you run mtty to unlock your device again? You only need to unlock one time. it's not necessary to do this every time you flash a rom.
ramersonw said:
Remove battery and press power button sometimes, then put back battery and try to power on your gene. Then try to enter in bootloader mode to flash another rom.
PS. I don't know if I understand well, but before you flash lomlom's rom again you run mtty to unlock your device again? You only need to unlock one time. it's not necessary to do this every time you flash a rom.
Click to expand...
Click to collapse
i think u r right.he did it twice...
hey how is the perfomance of sony psp?r u enjoying the games?what is the cost?which game is your favourute?
The performace of psp is great. PSP is the better portable console for 3D games. My preferred games are Gran turismo, GTA Chinatown Wars, Motor Storm Arctic Edge and Burnout Dominator. I love racing games About price, here in Brazil, games costs about 50-60 US$. But there is cfw. Is one of the best consoles I've ever had.
hiiiii
Thanks for replying i tried to install other rom but
the each and every rom in system are telling that get new update utility when i open that ruu
pls suggest me any W.m 6.5 rom where all the applications will run
ps kindly post the link for that
pardhumadarapu said:
Thanks for replying i tried to install other rom but
the each and every rom in system are telling that get new update utility when i open that ruu
pls suggest me any W.m 6.5 rom where all the applications will run
ps kindly post the link for that
Click to expand...
Click to collapse
may be u should check this...
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
help
Hi frnd
i tried the thing which u said in this post
when i run mtty1.42.exe im getting the below thing
what should i do know
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD Ver2.00: Low Capacity
SD clock to 24MHz
***** user area size = 0x78800000 Bytes
SDInit---
SDInit OK
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
"boot.bin"
:F=boot.bin
start download
==CreateFile err==