After trying for update to windows6 phone starts only on bootloader
hi
is ur HSPL done if not read krazys stiky and do it if done and u get tricolor
just attached ur phone to the comp via usb cable if u get the usb text on the phone just flash any other working rom
goodluck
mirecle said:
After trying for update to windows6 phone starts only on bootloader
Click to expand...
Click to collapse
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Here is log using Orefkov method
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x3CB80000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
Cmd>
g_cKeyCardSecurityLevel = FF
i think this indicates that the cid is locked if so what is the method to unlock it.
can is use jtag method?
is yes please discuss the method and tools needed for it
I think we need some experienced people to help mirecle out from the trouble
Guys please help ...i don't have that much knowledge about this issue...
mirecle said:
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Click to expand...
Click to collapse
Hi
You dont have any other choice but to take it to service center...good luck
hi
if this is ur SPL : SPL 1.28.0000
u have not done hspl without this u cant flash any roms
u can try connecting the usb cable wile in the tricolor and try flashing a new official htc rom for ur phone if it does not work sorry u need to take it to service
mirecle said:
I tried flashing with many other roms but it stops at 2% saying error 270 (image file is corrupted)
phone goes on bootloader with pressing on/key or by attaching with usb without camera key pressed and search for sd card then with tricolor screen which shows
ONBL
SPL 1.28.0000
Dont Power off
Pls update new image now.
while inserting usb it shows usb on left bottom of the screen. When i try to update rom with ruu the phone resets at 2 % and on computer screen it shows update error 270 (image file is corrupted)
pls help me to solve the problem
Click to expand...
Click to collapse
Hi I too have the exact same problem
Hi my spl too is 1.28.0000 and I tried unlocking by both methods and upgrading by sd card but to no avail any suggestions ? PS I have flashed many custom roms before and know how to do this and have read all the stickys there are.
ankushv said:
Hi my spl too is 1.28.0000 and I tried unlocking by both methods and upgrading by sd card but to no avail any suggestions ? PS I have flashed many custom roms before and know how to do this and have read all the stickys there are.
Click to expand...
Click to collapse
Do u mean u have flashed Custom Roms for Gene before ???
Yes I have flashed custom Roms
Yes I have the gene 4 1.5 years and it came with wm5 and I upgraded it to wm6 and it was unlocked by oilpro but the last rom I flashed it with changed the spl to 1.28.0000 and now I am stuck.
You must have flashed an original rom with SPL \ IPL. So you brick your gene.
Related
I flashed HardSPL 2.30olipro and it wont boot the OS when I reset, the screen stays black like its still off and the green light at the top stays on, I can still access the bootloader and use MTTY, I have tried flashing various ROMs and the "set 14 0" but nothing works, At the moment I have :
IPL-1.00
SPL-2.30.Olipro
Anyone have any ideas?
Well, it appears you can get to mtty...
Try Task 28 (this usually works when stuck in boot screen - not sure exactly where you are stuck)
or...
Try flashing a new ROM.
todd_jg said:
Well, it appears you can get to mtty...
Click to expand...
Click to collapse
Yea no problems getting into the bootloader and using MTTY
todd_jg said:
not sure exactly where you are stuck
Click to expand...
Click to collapse
I'm stuck as soon as I turn it on, blank screen like its still off and green light at the top is on the whole time, but not when i go to the bootloader.
Thanks for the help
My problem of noot being able to see any splashes and not being able to turn on for that matter is weird, Who knows a way that I can erase all of the phone totally except for the bits that cant be likle the SPL and IPL, Is there any way possible to flash someones dumped rom, and use the wlan fixing method to set yourself a new Mac adress etc.
In the memory map it says the Radio and bootloader are at "0x????????" does anyone know whats under the mysterious question marks?
deleted post
Korpse said:
My problem of noot being able to see any splashes and not being able to turn on for that matter is weird, Who knows a way that I can erase all of the phone totally except for the bits that cant be likle the SPL and IPL, Is there any way possible to flash someones dumped rom, and use the wlan fixing method to set yourself a new Mac adress etc.
In the memory map it says the Radio and bootloader are at "0x????????" does anyone know whats under the mysterious question marks?
Click to expand...
Click to collapse
Have you tried to reflash the HARDSPL?
binky11 said:
Have you tried to reflash the HARDSPL?
Click to expand...
Click to collapse
Thanks for helping me
It wont actually let me write over it because it has that protection on it to stop roms overwriting it with an older version, would it work (and be safe) to delete the SPL using the erase command then reset the hermes and write the SPL again?
Hi! i also got same problem, can still access bootloader and mtty only
Any solution that i can do? the mtty command " erase [StartAddr [Len]] " can it?
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 610
Storage Total block: 326
Total Bad Block in CE: 0
NeedToEraseBlockStart: 623
NeedToEraseBlockEnd: 936
Storage format success
Cmd>checkimage
IPL CRC checksum = 0x856C952E
SPL CRC checksum = 0x738D6562
CE CRC checksum = 0x92C76E00
ExtROM CRC checksum = 0x2F8830F2
Radio Image CRC checksum = 0xB3F22A62
Thanks first.....
Korpse said:
Thanks for helping me
It wont actually let me write over it because it has that protection on it to stop roms overwriting it with an older version, would it work (and be safe) to delete the SPL using the erase command then reset the hermes and write the SPL again?
Click to expand...
Click to collapse
The SPL area is touchy. If you were to erase the Bootloader, I am not sure you would ever be able to flash anything, since it uses bootloader commands to do it. Check the MrVanx downgrade guides. There are instructions for overwriting the latest HardSPL. It is a two step process, first using SSPL. Give it a shot.
Im having to same problem,
IPL 1.04
SPL 2.30 Olipro
Cmd>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 462
Storage Total block: 474
Total Bad Block in CE: 0
NeedToEraseBlockStart: 475
Storage format success
Cmd>checkimage
IPL CRC checksum = 0xC1AC9D2F
SPL CRC checksum = 0x327DEB48
CE CRC checksum = 0x4E705577
ExtROM CRC checksum = 0x85083D45
Radio Image CRC checksum = Checksum: Wait interpreter timeout
0x0
Cmd>
when I try to reflash any rom I get an error, usually hangs around 12%
Hey guys,
Anyone got a resolution to this problem yet?
Heres whats happening:
When I turn on the device I get the green led light but nothing shows on the screen at all, I can still access the boot loader the normal way.
- Tried Task 28
- Can flash any ROM but doesn't fix issue at all
- Happened after i updated to HardSPL 2.30, but cant downgrade because I need access to the OS to use SSPL.
Thank you for any help
Same problem.
Hi,
don't know if this will work for you, but it did for me. the difference is that mine wasn't hardspl.
I had the same problem when i was trying to upgrade to WM6 a friends JasJam (i had a USB connection problem). i tried alot of flashing, and the only one that seemed to work for me was the Official I-Mate ROM i got from this thread:
http://forum.xda-developers.com/showthread.php?t=348436
and flashed it after going into the bootloader.
after flashing this, i loaded the hardspl v7 from this one.
http://forum.xda-developers.com/showthread.php?t=296722
and after that, flashing any ROM works perfectly.
Hope this helps.
I'm going to try that but I'm not sure if it will work.
I am already running:
IPL-1.00
SPL-2.30.Olipro
so it will not let me override it with HardSPLv7
Not sure if I can be of much help but I had the exact same problem after a flash, then just booted into the bootloader and loaded a ROM from my MiniSD card (CRCs Rom) and that seemed to fix my problem. I also have HardSPL 2.30 installed
try
cmd>set 16 0
Hope it works, normally when i get stuck in the bootloader its what i do, soft reset, plug it to usb run mty and do that comand. after it says write nand soft reset the device, it should load the os with no problems ^^
I have the same problem too. I ran the hermes unlocker v3a and after 100% it won't boot, but the green light turns on at the top. I can get into bootloader and MMTY. IPL 1.01 and SPL 1.4 Olipro
I'm a total noob so please somebody help!
Hi Guys,
I'm from Germany and I have the following problem:
I wanted to flash a WM6-Rom onto my SDA 2 / HTC Hurricane.
I did everything that was described in the tutorial but at one point I have got a problem:
When it comes to opening mtty, I can't flash the Rom.
It says:
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
What to do now?
I have absolutely no idea.
And I would be very glad if somebody could help me to get ANY Rom onto my device.
I'm kind of frustrated right now.
See you.
Timops
it's to small information to say anything.
you must past whole communicates from Mtty (everything)
than we can say something about it
Alright.
Then I will try it again today and post the whole mtty log.
Perhaps you can do sth. with it.
But now I've got the T-Mobile-UK-Rom (WM2003) on my device.
But I really want WM6.
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
lazaj007 said:
1- do you unlock phone from application lock?
2- do you change CID to 11111 ?
3- do you upgrade phone with latest SPL for hurricane (for hurricane WM6)
4- do you writing commands in mtty yourself? or copy/past? (copying doesn't work)
Click to expand...
Click to collapse
1- I used the cert.cab. I think this is application unlocking
2- yes I did by using SPV-Services
3- I don't know, but I used PatchedRuu.exe (I think this is that)
4- yes I write them myself
I'll try in a few minutes and post the log if it doesn't work.
But don't hesitate to post any suggestions or information.
BTW: Is my English understandable?
Now this is my log from mtty:
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
HTCSSuperCID ' HTCE
Cmd>format BINFS
Format BinFS partition.
Format is completed!!
Cmd>l c:\ROM.bin
clean up the image temp buffer at 0x8C080000 Length 0x01C40000
MTTYDownloadImage "c:\ROM.bin"
:F=c:\ROM.bin
start download
SAddress 82040000Hh Length 02C00000h
Before flashing new image , formatting old OS is completed!!
Start flashing new image!!!
*checksum = 0, skip checking
OEMFlashWrite(82040000h,8C080000h,01C00000h)
Update BINFS offset 0x00000000 length 0x01C00000 ...
Update BINFS success.
*checksum = 0, skip checking
Image Download Finish
OEMFlashWrite(83C40000h,8C080000h,01000000h)
Update BINFS offset 0x01C00000 length 0x01000000 ...
Flash BINFS failed.
Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
Click to expand...
Click to collapse
I think I know where the problem is:
I can't get into the bootloader correctly.
When the phone asks me if I want a IU (0) and I press the Zero-Button on the phone, nothing happens.
What to do now?
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
I tried this so often but I don't give up!
I'll try again, maybe I'm lucky.
Who knows?
Where can i get this PatchedRUU ? I have the NBF File but i think a need the RUU program it self, but where to get it ?
here is PatcedRUU http://www.spv-developers.com/forum/attachment.php?attachmentid=65
wrong RUU!!! RUU from above will KILL your Hurricane!!
Above RUU will kill your Hurricane because it for Typhoon.
BTW: I had "CMD55 failed" error when using bad USB-cable... trying another cable made it disappear.
lazaj007 said:
you must trying to success. maybes SPL was upgrade incorrect, go to bootloader and try to upgrade SPL by patched ruu again
Click to expand...
Click to collapse
I have the same problem like Timops...Download Fails !!!
OEMFlashWrite error(12)
Error : DownloadImage return error (code = 0xFFFFFFFF)
I decide to try upgrade SPL..............but nothing...I get the "white background"
now what can I do....? USB connect not working...bootloader not working...maybe jtag?
HI bros....all the tutorials are gr8 however....i just cant figure out what to do...i read all may be 10 times still canot decide...plz help.... when i insert my sd card with 'gene_hspl.exe...this is BY our bro @krazy_about_technology
it just becomes white for a second...so i used the second method .....plz note i cannot use the phone as it goes directly to bootloader mode as i put the battery...
the second methos showed this....
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD clock to 24MHz
***** user area size = 0x1DD80000 Bytes
SDInit---
SDInit OK
g_cKeyCardSecurityLevel = FF
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
Not allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
i also used Orefklov methos by putting GENEIMG.nbh... however i get... invalid certificate....
my phone is bricked....by somebody...it shows onbl 1.02.0000 spl 1.02.0000
this happens as soon as i put the battery it comes to this screen....
its a gene.... sud i use JTAG Method or ANY OTHER..plz advice
................plz help me.........
You said read 10 times.....
but why you Copy and run the file gene_hspl.exe from your sd card??
The tutorial said t run from phone memory
Read it again...
Step 2: Preparing your phone
--------------------------------
1. Copy the file gene_hspl.exe from the SPL Updater\Olipro folder that you got in step 1 to the phone memory.
Click to expand...
Click to collapse
and it seems that u didnt pressed and hold the camera button.
stupidgye said:
and it seems that u didnt pressed and hold the camera button.
Click to expand...
Click to collapse
bro i pressed camea buton...and did that process 10 times
i have read and i know it sud be used from the phone
however bro i think u didnt read my post carefully it says i cannot use my phone as it comes to bootloader mode as soon as i put the battery...
hence i tried everything....
thx for ur advice.... plz let me know if there is anything more i can do which i have not done....
BesFen said:
You said read 10 times.....
but why you Copy and run the file gene_hspl.exe from your sd card??
The tutorial said t run from phone memory
Read it again...
Click to expand...
Click to collapse
LOL +1 for that
Read the tutorial 11th time
and try this also
http://forum.xda-developers.com/showthread.php?t=513329
just ignore any message which says "error connecting with device"
and whn it says can u see that olip screen enter "no" and thn follow the instruction
Addicted2xda said:
LOL +1 for that
Click to expand...
Click to collapse
my dear bro......didnt i say i cannot operate my mobile..... this was a try by operating from sd card....
i used the orekfov's methos in which u can try from sd card... so just thought of using this also by that method as i cant operate the mobile...
however.... i will try this method u mentioned...
thx for ur advice.....hope this one solves it
stupidgye said:
Read the tutorial 11th time
and try this also
http://forum.xda-developers.com/showthread.php?t=513329
just ignore any message which says "error connecting with device"
and whn it says can u see that olip screen enter "no" and thn follow the instruction
Click to expand...
Click to collapse
bro i tried this also same problem..... any other solution...
i think i better givethis mobile back....to the customer...
if u have any other solution plz tell me....
Your phone's onbl has gone corrupt due to improper usage of gene_hspl.exe. You will have to give it to service center. There is nothing you can do from home now. Dont fear, give it to them, they can resolve it in minutes, or a few days maybe, depending on how busy they are.
While giving it to the service center, do not tell them that you did all these experiments and all. Just tell them that it is not working. The first test they will do is loading the original ROM and testing. And if you are lucky enough, they may even return it the very next day.
krazy_about_technology said:
Your phone's onbl has gone corrupt due to improper usage of gene_hspl.exe. You will have to give it to service center. There is nothing you can do from home now. Dont fear, give it to them, they can resolve it in minutes, or a few days maybe, depending on how busy they are.
Click to expand...
Click to collapse
Bro.. can u give me a suggestion on how u.. conclude that onbl is corrupt...
bcoz this onbl status was there when i got this mobile for repair...
also plz tell me how did i use it an improper way so that i dont use it again like that....
however thx for ur advice.... i will give it to service station....
The onbl number should never change during the SPL patching process. If it changes, it leaves no choice in our hand other than giving the device back to service center or using the JTAG method, which i wont recommend unless you are a hardcore enthusiast with an inclination towards electronics engineering as it requires opening up your motherboard and using electronics related tools to reflash it.
The right way to do it is fully described in my guide. Follow it step by step, giving deep thought to every word that i say. You wont go wrong with that.
Sorry wrong Post....
Just tryed to update my Nike Rom. Now my Nike is stuck in Bootloader Mode.
It displays:
NIKI100
SPL-1.22 hard
CPLD-4
Flash stops at 73%. Please help me!!!
Need more info...
What error does it give? (If any)
Try using mtty to boot the device.
Wezternator said:
Need more info...
What error does it give? (If any)
Try using mtty to boot the device.
Click to expand...
Click to collapse
All the time error 262. tried several rom's - error 262 (stops at 89%, 98%). tired official rom - same.(stop at 73%). Tired flash with sd card-same
In bootloader it displays:
NIKI100
SPL-1.22.Hard
CPLD-4
Upgrade ROM code error. Please try again.
Please help!
Try this: Clicky!
Ignore the lower bits of that post, just grab a copy for MTTY and type 'boot' see if there is enough info on he ROM to boot he device, then try again
The problem is that I have cooked own rom, rom bad(promblem with xip), I did boot
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0x8400, total sector=0x127C0
Storage start block=549, total block=1183
Total Bad Block in CE: 0
Erase physical block from 839 to 2004
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
But now stuck in first splash screen.
How to backup from hardspl to original SPL on the dead phone??
use mtty:
Fill RSVD information for block 288 to 309
Storage start sector=0x9E00, total sector=0x114C0
Storage start block=653, total block=1107
Total Bad Block in CE: 0
Erase physical block from 943 to 2032
si backup: Erase physical block from 2032 to 2048
No card inserted
OEMIPLInit clear 10MB ext RAM
OEMGetUpdateMode
IPLMSG:0x4:ERROR: Failed to retrieve stored image information.
Any idea? PLZ!
dmx_nigga said:
Any idea? PLZ!
Click to expand...
Click to collapse
Double posting puts people off wanting to help dude. Don't bump.
Tired other rom. yes!! 100%, but stuck in first bootscreen.
brothers, how to back up original spl from bootloader?
Many times I happened to cook ROM that do not work (especially with the 6.5 in Italian) but is not a problem!
probably yuor Hrdspl is not ok, try to flash it again and then flash the official rom
Link to Hard SPL 1.22
Link to Official WM 6.1 WWE with ROM 1.65.29.25
how can i flash hard spl 1.22 from bootloader?
• power off yuor niki (Remove for a couple of seconds the battery)
• press and hold power and camera buttons,you must have (tree color) bootloader
• connect usb cable
• run ROMUpdateUtility.exe (or Nike CustomRUU.exe) in a folther with hardspl-1.22-nike.nbh
salvy.c.83,I can't flash hardspl, it's stop at 0%..help please..
salvy.c.83 said:
• power off yuor niki (Remove for a couple of seconds the battery)
• press and hold power and camera buttons,you must have (tree color) bootloader
• connect usb cable
• run ROMUpdateUtility.exe (or Nike CustomRUU.exe) in a folther with hardspl-1.22-nike.nbh
Click to expand...
Click to collapse
Don't you need an SPL Jump running to upgrade the SPL? But, if you can't get into an OS you can't run the jump exe.
You need to find a really old ROM hat only requires the HardSPL you have then flash that. Or try an official one? Or have you already tried that
hello every body
i was using gene from past 1 year i successfully upgraded by w.m5 rom to W.M 6.1 rom by lomlom(touch flo) for the 1st time than after i again upgraded it with W.M 6.5 rom by sumit's rom successfully but i was not satisfied with the sumits rom so i flased rom and tried to install w.m 6.1 by lom lom again...so again i started to install that, after running gene unbricker my screen is turned into 3-colour boot screen then in next step mtty step was also successful and the w.m6.1 was setuped successfully
but my problem was, when i restart my device im unable to start the mobile directly when i restart only a RED LED was blincking single time i tried to install again but it is not possible
please help out of this..........
Remove battery and press power button sometimes, then put back battery and try to power on your gene. Then try to enter in bootloader mode to flash another rom.
PS. I don't know if I understand well, but before you flash lomlom's rom again you run mtty to unlock your device again? You only need to unlock one time. it's not necessary to do this every time you flash a rom.
ramersonw said:
Remove battery and press power button sometimes, then put back battery and try to power on your gene. Then try to enter in bootloader mode to flash another rom.
PS. I don't know if I understand well, but before you flash lomlom's rom again you run mtty to unlock your device again? You only need to unlock one time. it's not necessary to do this every time you flash a rom.
Click to expand...
Click to collapse
i think u r right.he did it twice...
hey how is the perfomance of sony psp?r u enjoying the games?what is the cost?which game is your favourute?
The performace of psp is great. PSP is the better portable console for 3D games. My preferred games are Gran turismo, GTA Chinatown Wars, Motor Storm Arctic Edge and Burnout Dominator. I love racing games About price, here in Brazil, games costs about 50-60 US$. But there is cfw. Is one of the best consoles I've ever had.
hiiiii
Thanks for replying i tried to install other rom but
the each and every rom in system are telling that get new update utility when i open that ruu
pls suggest me any W.m 6.5 rom where all the applications will run
ps kindly post the link for that
pardhumadarapu said:
Thanks for replying i tried to install other rom but
the each and every rom in system are telling that get new update utility when i open that ruu
pls suggest me any W.m 6.5 rom where all the applications will run
ps kindly post the link for that
Click to expand...
Click to collapse
may be u should check this...
http://wiki.xda-developers.com/index.php?pagename=Elf_RUU_Error_Codes
help
Hi frnd
i tried the thing which u said in this post
when i run mtty1.42.exe im getting the below thing
what should i do know
set 32 1
+ SD Controller init
- SD Controller init
+StorageInit
SDInit+++
SDInit - SD ver2.00
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SD Ver2.00: Low Capacity
SD clock to 24MHz
***** user area size = 0x78800000 Bytes
SDInit---
SDInit OK
BML_Open errornErr=0x800A0000)
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = 0
Cmd>ls boot.bin
clean up the image temp buffer at 0x8C100000 Length 0x03A00000
BOOTLOAD_PAGE_TABLE_BASE_C_VIRTUAL= 0x8C080000
Clear image temp buffer done .
MTTYDownloadImage
"boot.bin"
:F=boot.bin
start download
==CreateFile err==