Related
Since post March 2008 GENEs got new SPL and lots of people have bricked there GENEs using orefcovs HSPL and due to some other reasons.
We need to find some solution and I will consider donation towards person who find proper solution.
There will be more people who willing to make some donation towards the solution.
Clever developers like Olipro, Pof, Jockyw2001, PLEASE look on to this.
We will consider donation for your valuable time and skills.
NOTE:
PLEASE REED FROM POST 40 FOR UNBRICK METHOD BY OREFCOV
IMPORTENT
AFTER YOU APPLIED UNBRICKER SUCCESSFULLY, DON'T EVER FLASH ANY SHIPPED ROM PACKAGES
TO modo.
Please sticky this
I dont have bricked Gene for test.
Can you enter to bootloader on bricked Gene? (Press and hold Camera button and turn on device)
Can device connect to computer via mtty?
orefkov said:
I dont have bricked Gene for test.
Can you enter to bootloader on bricked Gene? (Press and hold Camera button and turn on device)
Can device connect to computer via mtty?
Click to expand...
Click to collapse
I can go in to bootloader and it shows
ONBL 1.10.0000
SPL 1.10.Olip
I couldn't communicate via MTTY
I have tried 'set 14 0' and 'set 16 0'
nothing happen
Do you know correct commands for GENE on MTTY
hey all, I'm willing to try and help. PM me with your MSN address, or (preferred) come on IRC to #xda-devs on irc.freenode.net
for IRC you can use
- either java: http://java.freenode.net/ (just change the channel name to #xda-devs and the nickname to your forumname or similar)
- or you can download an irc client from mirc.com and connect using that.
thx cmonex ...
Try it.
Copy geneimg.nbh on your SD-Card
Insert card in device, press and HOLD Camera button, and turn device on.
If you see white screen whith countdown in bottom left corner of screen, press Power button.
Wait.
After you will see "Succees. Press any key".
Press Power button, and soft-reset device.
any brothers tried ??
I had bricked mine .. i am scared now
Try itself, will not be worse.
1) card need to be in FAT16 or FAT32 ??
2) empty card or card with content also ok ??
Format SD-Card as FAT32.
Put GENEIMG.nbh on SD-CARD.
Insert SD-Card in Gene, press AND HOLD "Camera" button, and do soft-reset.
If you see white screen with "Reading SD content":
Release "Camera" button, wait, and when countdown in left-bottom corner of screen is appear, press "Power" button. Flashing is begin. After you will see "Success. Press any key". Do soft-reset.
But if you see 3-color screen, then you mast do magic with your SD-Card.
See http://forum.xda-developers.com/showthread.php?t=371147
orefkov said:
Try it.
Copy geneimg.nbh on your SD-Card
Insert card in device, press and HOLD Camera button, and turn device on.
If you see white screen whith countdown in bottom left corner of screen, press Power button.
Wait.
After you will see "Succees. Press any key".
Press Power button, and soft-reset device.
Click to expand...
Click to collapse
Didn't work
laramiller said:
Didn't work
Click to expand...
Click to collapse
Write more in detail, that occurs.
There was a white screen with an "Reading SD-Card content"?
not working
There was a white screen with an "Reading SD-Card content"?
no .. nothing
Бля, WRITE MORE DETAIL.
How not working?
Flashing not begin ?
Or erron on flashing process ?
Or dont boot after flashing?
leofungwai said:
There was a white screen with an "Reading SD-Card content"?
no .. nothing
Click to expand...
Click to collapse
Simple go in bootloader?
3-color mode?
yes bootloader mode
i tried 3 different brand card ....same same ..
Brand not important, important size of card.
Try 128 or 256 MB card, format in FAT32.
Or see http://forum.xda-developers.com/showthread.php?t=371147
kingston 256M X
Toshiba 512M X
sandisk 128M & 256M X
the wm5storage issue tried .. X
Try:
Go in bootloader.
Connect device to computer via USB.
Rename geneimg.nbh to ruu_signed.nbh and flash throught RUU.
I have a alltel touch pro, that I CANT GET TO FLASH. I dont understand the problem. I keep reading the install procedures and whenever it actually gets to the status bar on the phone....it quits....am i forgetting to do sumthin before i install??
I take it you correctly unlocked your phone using the correct Hard SPL if not go here for instructions http://forum.ppcgeeks.com/showthread.php?t=42503
How to Flash Via PC:
1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there
If that fails please trying these directions (thanks sn0b0ard)
1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!
Flash from microSD Card (Thanks to MadlyAlive):
1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.
i just flashed my rom to natf 4.0 and it says this beta software has concluded, and there is a white screen stuck on my fuze and it wont do anything, it wont even connect to active sync so i can re flash it i need help big time, phone not working, i run a business,i have no other phone, what can i do.
Did u HardSPL before flashing ? If not do so. See here
http://forum.xda-developers.com/showthread.php?t=448008
If yes u do not need Activesync, u can flash a ROM (NOT THE HARDSPL) from the SD Card as well
See:
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Raphael Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to RAPHIMG.nbh
4. Copy the RAPHIMG.nbh file to the root of your microSD Card
5. Remove Sim Card and Restart phone
6. Plug the microSD Card into the phone
7. Press and hold the volume down button, then press the reset button with the stylus. Release the volume down button when bootloader tricolour screen appears
8. Follow the onscreen instructions to start flashing
9. Once phone finishes flashing and says Update Complete, reset with the stylus
10. When it gets to the screen where it configures the stylus, HARD RESET
(hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
11. Follow onscreen instructions to set up your New Rom
Taken from this, thread
http://forum.xda-developers.com/showthread.php?t=448008
Did u try a Hard reset, this is mentioned in Step 10, just in the above instruction.
And last, Why did u take the 4.0, the ROM is at 4.7 according to
http://forum.xda-developers.com/showthread.php?t=469450
here
hi friends
i have htc p3400 old.it was working good.i flashed it many times with different roms.by mistake one day i hspl it with oref.oref was only for new gene.and unfortunately it was bricked.did not power on.only tricolour screen appears in bootloader mode showing spl oref instead of olip.plzzzzzzz help what to do know
thx to all members
how is your mobile now.,. I too did the same mistake.,. Mine htc p3400 is also dead.,. Did you got any solution for that.,. this is my mail id [email protected] please send your reply to that id.,. please dont mind.,. thank you.,.
try this
have u ever used mtty software......
use mtty software to recover ur hspl..........search with "gene_unbricker"
here is link"http://forum.xda-developers.com/attachment.php?attachmentid=70167&d=1202801854"
i have downloaded it.,. what is the next step.,.
nithin_bablu said:
i have downloaded it.,. what is the next step.,.
Click to expand...
Click to collapse
1. Unpack all in some folder.
2. Press and HOLD "Camera" button and turn on device.
3. If you see 3-colored screen, release "Camera" button, else try again.
4. Kill ActiveSync on computer - Press Ctrl+Shift+Esc, found "wcescomm.exe"
process and terminate it.
5. Connect USB-cable to device.
(In the left bottom corner of the screen to appear the text "USB")
6. Run mtty1_42.exe programm, and press button "USB".
7. In the opened window type the text:
set 32 1
Press Enter. (You must type this text by hand, not copy/paste)
8. After you will see answer from device in window.
9. Type in window that text:
ls boot.bin (for "ls"----this is small L,mot capital i)
Press and HOLD "Camera" button, and press Enter.
10. After a while the device screen becomes white.
Wait 2-3 second, and release "Camera" button.
11. Close mtty programm.
12.there r 2 folders,"for old gene" & "for new gene"---u have old gene,so copy that .nbh file in gene_unbriker folder.
13. Run RomUpdateUtility.exe programm and follow her instruction.
14.after that install Operating System u like......
reply me with ur gene working OKKKKKKK
i tried but nothing happened dude.,.
tell me exactly about spl......u have old gene na....?tell me exactly what u did......?
yes mine is old gene and i tried new gene (0ref) method to upgrade.,.
then i think u have only 2 options.......
1--if u have warrenty,go to nearest R T Outsourcing
2--try gene h-jtag method...
will u explain me what is that h-jtag method.,.
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
search the forum for h-jtag for htc....
plz read the 2nd page of this thread......
http://forum.xda-developers.com/show...=524267&page=2
i think definately it will solve ur problem......
Hello, I was wondering how to revert back to wm 6.5 since my touchscreen stopped working randomly. I need to revert back to stock in order to ship it out for repair. I would greatly appreciate it if you provided step by step instructions for this procedure. Please and thank you
Well...
- take a SD <= 2GB
- download ROM 3.14 file from HTC homepage by entering your HD2's serial number
- connect your SD to your PC by using a card reader
- format your SD to FAT32
- extract your downloaded ROM file by using 7-zip or something similar
- copy the RUU_signed.nbh to your SD
- rename RUU_signed.nbh to LEOIMG.nbh
- power off your HD2
- insert the SD
- press and keep pressed volume down button while you press power on button
- release buttons after you see boot screen
- follow the instructions given on your HD2's screen
- after flash has completed, press the reset button
But, don't forget: be sure your HD2's battery is fully charged, or at least > 50%!
If you have a T-Mobile US version, download ROM file from here: http://dl.htc.com/ruudownload/t-mobileUS/Filedownload.aspx?pid=leo, or here: http://forum.xda-developers.com/showthread.php?t=655653
BTW: This is the the way I answered this question four times the last 8 days.
Hi thanks for the tutorial. Indeed your right about the 4 times. The topic starter didnt use the search tool.
but i have a problem after all the steps the screens says update succesfull after 10 minutes it still doesnt reboot or turn itself "off" i can only press the reset button or remove the battery. When it boots its booted in the 3 or 4 colored screen. What did i do wrong??
p.s: battery level is on 70 i think.
You are right about the reset button. Somehow I missed to add this information ... done.
Normaly it's only possible to enter boot loader screen by pressing the volume down button (or by update software during update process).
Is your HD2's button possibly wedged or stuck?
What is prompted on your boot loader screen?
Which OS have you had on your HD2 before flashing back to STOCK ROM?
thanks..
No buttons are stuck or wedged as far as i can see.
on screen it says....
LEOIMG.nbh -
RADIO_V2 -
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATE -
Press power button to start update image
Press Voldown button to cancel update image
after pressing power button
LEOIMG.nbh - ok
RADIO_V2 - ok
RCUST - ok
BOOTLOADER - ok
SPLASH1 - ok
OS - ok
CONFIGDATE - ok
RUU_WALPAPER1 - ok
RUU_WALPAPER2 - ok
Update Complete
UPDATE SUCCES
then............ nothing happens so i press the reset button and get back in the colored screen???????
I came from NEXUS ONE ( v2.8 )
thanks
After UPDATE SUCCESS:
- remove battery
- remove SD
- insert battery
- power on your HD2 without SD
What is your HD2 going to do?
hi
did that.... but i still am stuck in the colored screen....... what i noticed is that my HSPL is gone i now have SPL-1.42.0000 so it did update but downgraded the HSPL and it didnt install the ROM ????????
thanks
by the way MAGLDR113 seems to install ( 100% very quickly tho ) but if i hold the power button it still get into bootloader not in the recovery.
- install HSPL from boot loader screen
- run Task29 from bootloader screen
- try SD card method again
did all that but still returns in bootloader BUT now it has SPL-3.03.0000 so something is changed.