i try flashing the cable came off. Now it stuck on boot screen.
any idea on how to fix the phone. at this point it will not synchronize to pc
Thanks ahead of time.. Please reply. any idea i will try it.
I already fix the problem. it is quite simple.. if anyone have the same problem
just let me know i can try to help.
Cingular 8125 no boot
Hi,please help me i have a cingular 8125 which displays three colors menu screen ,how can i resolve this i will be very thankfull
Related
i posted this in the other forum as it mite be more busy there http://forum.xda-developers.com/showthread.php?p=1703450#post1703450
i am new to all this and i stupidly went running into things and tryed to ROM upgrade my t-mobile Vario II (HERM300), not knowing i had to CID unlock first, it has broke! when i boot it up i can not get passed the t-mobile splash screen and it also flashes "no-gsm". i have read many suggestions on fixing this but i have had no luck. i can get into the boot screen however and get the red green and blue stripes. i have IPL 1.01 and SPL 1.04. it will allow me to connect to my PC with USB but active-sync does not recognize i have connected the phone.
please help someone. i just need a way i can get this thing working again. if i could just get the phone into a state of use again that would be good.
can someone help please.......??
Have you tried just flashing a Radio Rom Only?
Three days back,my SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
I had a similar problem with mine. The screen is the same as yours only varying with the sim card removed to a sim missing logo. Also mine makes the error/message noise repeatedly for a phew secoonds every half hour or so.
I just gave up in the end and admitted it was a brick
and the saga continues
Well the TyTn has died and I'm still waiting on a refund on a dodge wizard so its time to dig out the old SPVs I have a working Tornado (the right soft key has packed up thats a little annoying) so am trying to revive this hurricane.
I have linked some pictures of what is dose display and as you can see it will load into boot loader but due to not being ably to unlock it I cant flash any of the roms I have found.
I have been trying to fix this now for well bloody ages on and off but a good straight 12 hours just recently and to no avail.
In short I need a way to unlock the phone without active sync. The only way I can think of being able to do this is with some kind of specific software through boot loader
Any ideas?
HELP PLZ DEAD SPV c550 During WM6 Upgrade
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
hi everyone, can someone please tell me what i did wrong.
I have flashed a few roms before and this time every time i start the 8125 it gets stuck cingular raising the bar screen.
The phone will still do hard reset.
Ipl 2.25.0001
Spl 2.2.5.001
Gsm 02.25.11
OS 11.0.1.1
I tried to do upgrade it to the the TNT 19199 professional wizard v.2. I used the shell tool and dropped the nk.nbf file into the shell folder like i have always done before and this time its stuck at the same screen. I can't connect it to active sync or even the computer to put back the stock cingular rom back in. Can someone please tell me what im doing wrong, from what i understand the phone is not bricked yet because i can still do a hard reset but still sends me back to the main startup screen. Help please.
Stock ROM can be flashed from Bootloader mode, just put your Wizard into bootloader mode (Camera+reset), then run the stock ROM RUU.
thanks helped out perfectly
Same Problem
New to this...Could someone Please give me a walkthrough on how to do this.I can still hard reset.I reset using camera + reset...Brings up r/b/g screen.I don't know how to flash from there.Any help is greatly appreciated.
IPL 2.25.0001
SPL 2.25.001
OS is 10.0.0.10
I took it back to WM5.Seems to be OK.Gonna try using Wizard Service Tool instead of ShellTool.See what happens
You should HardSPL, then use RUU on ROMs without IPL directly.
Hi,
i have a friends I-Mate JAMin (or HTC Prophet)
its a G4, now...it was running WM5, so i put HardSPL on it, went to flash a WM6.1 rom and now all it does is sit at the tri coloured screen, it seems like the HardSPL has done nothing, because the SPL is still the old numbers (the originals, it hasnt changed to 2.G4.4PDA, or whatever its suppose to show)....
I need help ASAP, i cant go back to my friend and tell him his phone is stuffed..
PLZ HELP, ANYONE....PLZ
hi,
did u try this
http://forum.xda-developers.com/showthread.php?t=353547
yep, tried that.
i actually cannot boot into a OS on the phone,
when it turns on it goes straight to the Tri-Coloured screen, i need some desperate help with this,
i have put HardSPL on there but the SPL version on the tri-coloured screen numbers have not updated to a new version,
i installed an update to the IPL version, so that has gone up to 2.20 or something like that.
the SPL number is currently 2.13.0001
i cannot get past the tri-coloured screen.
PLZ PLZ PLZ PLZ PLZ help, is the phone stuffed?
how do i fix it?
Dont Worry
If your scree show RUU and you see USB in the left corner when connecting USB - then dont worry.
Just fksh it with a NVID wm5 Prophet ROM that is available in this forum and tou will have your device back.. you can then try to upgrade it to WM6 etc
boss i ve hermes cingular 8525 and the problem its freezes with sim and i try to update the rom and in the process its stop at11% and now when i power the phone its stuck at bootloader,the IPL-1.04 AND SPL-140 O1ipro plsssssssssssssssss i need your urgent solutuon to help me revive my phone thx in advance
quantumgsm said:
boss i ve hermes cingular 8525 and the problem its freezes with sim and i try to update the rom and in the process its stop at11% and now when i power the phone its stuck at bootloader,the IPL-1.04 AND SPL-140 O1ipro plsssssssssssssssss i need your urgent solutuon to help me revive my phone thx in advance
Click to expand...
Click to collapse
Man you need to read more,
Get to boot loader, pressing OK on left, power on right and stick stylus in then flash your 8525 shipped ROM from http://forum.xda-developers.com/showpost.php?p=1990320&postcount=6 while it is plugged in. The first thing you should have done is to upgrade your hard SPL on the very first sticky!! http://forum.xda-developers.com/showthread.php?t=296722
sounds like the Hermes was sim/cid unlocked 1st... Maybe we should put a warning on that thread to please re-install Hard SPL after you unlock your Hermes as the SPL is downgraded to 1.40....
Just a thought...