I bought a touch pro off of ebay. When I got it the phone was already unlocked. I went to get it activated last night. when I left I called my voicemail and checked my messages. Everything worked fine. But before I went to sleep I noticed I wasnt getting good signal. I did *228 and did both options. Didnt help.
Today at work I received two text messages, but i still could not connect to data (email) So after work I drove to alltel to see what was wrong. Come to find out I couldn't make or receive any calls. They told me the speaker was broken, after convincing them that it wasn't in fact the speaker, they put me on the phone with alltel tech. They concluded that my PRL was way out of date, amd they couldnt figure out why my phone wouldnt make any calls and that my phone was broke. I asked if I could just update the prl manually via EPST and they said yes but essentially it would not make a difference because it has to be done over the air. And since I could not make any calls Im basically S.O.L.
So basically when I left alltel I was under the impression I was infact S.O.L. and I bought a junk phone.
But a mile down the road, it worked again, granted, it took along time for calls to go through, but i could make a call to my voicemail, to *228, and I got the "test" txt message from the alltel rep that never went through..
now, 3 miles down the road, a little bit out of town, I tried to send the rep a txt message saying "IT WORKS!!" But it would not work, I am back to square one and cannot make any outgoing calls. Its almost like I am "out of coverage area" But any other time I have full bars at my home, which is only 6 miles out of town.
I manually updated my PRL to no avail. I cant do anything with this phone.
I think either its on its way out, and is working intermittently, or I need to go back to town where it was working earlier, and try to reprogram the phone again now that I have the new PRL in the phone, but I doubt this will work.
I am wondering if re-locking the phone will take care of the issue, but I am skeptical of that as well. I think the phone is screwed.
There's a link to a recently released alltel stock rom on this site, have you tried flashing the newer rom? It will update your PRI and PRL and radio. It may be worth a shot, seems you're up the creek anyway.....
do you have a link to the rom? I cant find it. I downloaded the one from HTC website and its from 2009-07-07. I flashed it last night.
the 7-7-09 one is the one he is talking about... once flashed it will install a PRL from 2 months ago what is a good PRL and update to the latest radio. if that doesnt fix you issue i think u got sold a bad phone man srry... find the guy who shipped it to you and burn down his house
depending on how the first person unlocked the phone could of caused some issues but none of the unlockers that i know of would cause this. so re locking it depending if it was on alltel before or not could fix it but could also make it so you cant flash anything to it.
Related
Hello,
I looked around a bit about finding the A-key. I just had my phone remotely fixed for the authentication problem, but they never told me the A-key even though I asked.. I was wondering if there was a way to pull it off the phone..
This is verizon, the akey is blank in EPST.. I tried CDMA Workshop and it got a bunch of crazy info but errored out on when getting the a-key. I also looked through qpst but it doesnt look like a-key is in there(under service programming).
Anyone have any ideas? Im about to start flashing and Id hate to be on the phone with verizon for another couple of hours every time this happens.
Before I called verizon I even tried generating my own Akey with that akey calculator but that didnt really work..
Thanks
some verizon service areas do not use an akey stored on the phone but instead they authorize in their sytem based on your esn and some identifier your radio sends them. This is the way it is in my area. the verizon tech told me all of their systems will be moving this way, supposed to help prevent phone cloning and some other security issues.
I was assured that all i would need to do is call if it tells me phone not authorized and they will correct it.
rmancl said:
some verizon service areas do not use an akey stored on the phone but instead they authorize in their sytem based on your esn and some identifier your radio sends them. This is the way it is in my area. the verizon tech told me all of their systems will be moving this way, supposed to help prevent phone cloning and some other security issues.
I was assured that all i would need to do is call if it tells me phone not authorized and they will correct it.
Click to expand...
Click to collapse
Ah I see so you're saying that it actually is blank not just hidden away..
Alright, thanks.
I gotta say im thinking this is true. I just flashed my phone to NexVisions rom and cant activate so im gunna have to wait till morning to get it activated because tech support stops working in the middle of the night i guess. If its as simple as it sounds, I will report back as such.
Soooo I left the phone plugged in on the otherside of the house (I figured I cant get calls why bother bringing it im my room) and it wasnt able to make calls i figured no out no in so i shouldnt be able to get calls. I wake up this morning to 16 missed calls because someone called in at work and Im the only one who can work.... it activated at some point in the night. *228 worked just fine... completely baffled... just worked out of the blue, does this have something to do with recieving calls? any ideas?
blksprk said:
Soooo I left the phone plugged in on the otherside of the house (I figured I cant get calls why bother bringing it im my room) and it wasnt able to make calls i figured no out no in so i shouldnt be able to get calls. I wake up this morning to 16 missed calls because someone called in at work and Im the only one who can work.... it activated at some point in the night. *228 worked just fine... completely baffled... just worked out of the blue, does this have something to do with recieving calls? any ideas?
Click to expand...
Click to collapse
When it wasnt authenticated before i called verizon I got the calls but I couldnt answer them and they would be missed calls after one ring or so.. Maybe thats what was happening in ur case..
Could be that verizons systems updated themselves or something..
I was wondering if anyone else has seen this behavior.
The phones appeared to have the original VZW roms on them but I admit I didn't look as closely as I should have and write down the numbers.
I've two warranty replaced phones that work this way.
1. Flash olipro&latest radio & latest (4.1) DCD rom
2. *228 (succesfully)
(Thinking back, the first time I did this I *228ed before applying the carrier rom)
3. After that calls cannot be made EVERY call even *228 results in a roaming "call lost"
I can flash back the original signed VZW rom that was posted here a while back and restore phone operations.
The *228 update then worked but could not check messages. The switch to non-broadband phone and back to the titan got me able to check voicemail successfully. I've redone the cycle but after applying the DCD rom, it doesn't take me back to a phone needs initial programming state. I'm gonna try to go full circle a third time now and see if I missed anything when it was 2am.
*ADDITIONAL: I just realized that when power is hit or the phone battery saves to power off, it locks up. Even though the lights still blink.
Do you have any thoughts? Have you seen this before?
I'm tempted to install the latest from HTC, but I don't want to give up on GPS - or has it the recovery from that been proven now?
Status update!
I had also noticed that there was a 2mo newer carrier cab from DCD. That didn't help.
At this point I've up/down/crossgraded to MR2 successfully.
This resolved the lockup problem.
I am in the process of following this thread to resolve the GPS issues. Hopefully the new roms will work with this radio http://forum.xda-developers.com/showthread.php?t=481750
A work around
Ok I went through that whole process to no avail.
However, I found a solution that I REALLY dislike and you will too once I tell you what it is.
It seemed pretty obvious that vzw somehow flagged the phone during the upgrade process to disable it. This was perhaps because I hadn't loaded the carrier cab when I updated, though I've done that before on earlier without any lasting effect.
**** NOTE *****
I strongly discourage you from taking the steps I have done below. Done incorrectly, you are committing a prosecutable crime with jail time involved.
**** NOTE *****
Knowing calls were blocked and that I would have a chance to hit hangup before the call was actually placed (that's why it beeps) I dialed 911 hit send and hit hangup. Obviously the call did not even start because the phone was in lock down mode (I haven't mentioned this before but the phone always booted to the extended network.) when the call was attempted. However, Verizon is also obligated to process all 911 calls. So, it switched from extended, to roaming, to Verizon. The call had been canceled even before it got to roaming, so there was no contact with emergency services. The upside is that the phone is now on the Verizon Network with the new radio and new ROM. I can do everything except a *228. This includes checking voicemail, #768, rebooting etc. I've not tried a hard reset, nor do I think I will.
I REALLY don't like the method, but I have my phone back.
I'm traveling to TX next week for SxSW again. I may see if I can do a *228 from there and get a better result.
I just received the following text message from Alltel:
"FREE ALLTEL MSG:
Update your phone May 18:
Dial *228 + SEND, option 1, wait for msg,
turn phone off & on.
Visit alltel.com/systemupdates for more info."
and after doing that my cell signal sucks, on an average i get 1-2 bars.
I was on another forum asking for help, and i was instructed to try an older PRL that didn't help, and i was told to try going to
Go to Start> settings > click on phone >
services tab > select "Network Services" and press "get settings" button
and clicking on "selecting roaming only"
that didn't make the signal any better or were the signal used to be.
I think it has something to do with Verizon and alltel merging.
can anybody think of anything else that might help before i call tech support and see what they can do for me
Thanks Chris
not sure how to help but i didnt get that message and im on altell to. I won't update if it does tell me to
it was an update from alltel..... i only get 1-2 bars about 75% of were ever i go
well this whole thing sucks !....my best buddy usually calls me every night on his way home from work, he hasn't called me all week.........so i called him tonight and asked if he has called me this week.......ya been trying to call you all week and it goes straight to voice mail with out even ringing....
and Ive been waiting back on a job offer, wonder why the company hasn't called me back yet..
im ****ing pissed !
*228 and option 1 is to activate your phone.. try doing it again and if that doesnt work try doing the update ur phones roaming service option. What PRL is your phone running (settings -> system -> device info) mine just updated to 30040 from 30039 what fixed many signal issues at my apartment. you can roll back ur prl also if you wish but you would have to find some one with the previous prl. too bad corolada stopped updating their site http://corolada.com/prl/
anyone want to off load 30039 or upload a copy of the prl file i lost mine - also any one want to offload and uplaod 30040 and i can see what towers they removed
Make the loooooong storie short, after talking to 8 different techs, the 7th sent me out a refurbished phone, telling me that MIGHT fix my signal problem, and if it doesn't we will go from their, well i got the new phone yesterday and lets take bets on how great the problem was fixed..............back on the phone again with advance tech, thier sending somebody to drive thru my neighborhood to check for signal problems, and i will get a call or text from alltel on the solution to the problem.........so wince the 15th of this month till the problem is resolved, tech said 7-10 days, the MOST signal bars Ive had is 3 once....i told him, you ARE going to credit me my account from the 15th to when ever i get satisfactory cell signal, since my parents have be loyal alltel customs for close to 10 years or you can eat from contract !
Ya im in a great mood
well as far as updates on the problem, i had some lady from alltel call me and pretty much ask for the same information that Ive already given, We will be sending somebody out thru your neighborhood to see if their are tower / signal problems and we will get back with you, lady i can save your guy gas money and tell you their is a signal problem !
and what about me not having a signal or at the most 2 bars of service since hte 15 of this month and still having to pay for the signal lose, im not paying for a phone that can only be used as a boat anchor, ummm sir your going to have to take that up with customer service,
ERRRRRR
UPDATED !!!
called tech support to get an update on my claim ticket number, to see whats going on with my problem..............Please just wait, we are working on the problem....ERRRRRRRR
SO everybody that has had signal service since the 15th of this month, suck a nut
just put on a older PRL they usually release a new one 1x a month recently so u might be f-ed for about a month
i tired that after like the 1-2 day and a couple days ago and nothing.....
Thanks for the advice tho
chris347101 said:
i tired that after like the 1-2 day and a couple days ago and nothing.....
Thanks for the advice tho
Click to expand...
Click to collapse
Answerman keeps a decent list of updated Alltel PRLs... you may want to try there: http://www.the-answerman.com/sidlist/prl/index.asp
Ive been on that website a couple times all ready, Ive tried 30031 thru 30038 and nothing works
Answerman's prl
Try the 40049 prl. I know its for special devices but it worked for me. I was having the same problem.
didn't make a bit of difference lol
Thanks for your help tho
Hey, I posted this over at AVForums and didnt get a response and thought that you guys over here are probablt better informed. Below is a quote of the thread I started:
Well to start off, i'll tell you I am on the one plan with 3 and have a brand new sim free htc evo 3d.
Ive had the phone for about 2 weeks and it has worked perfectly ever since I got it. About 4 days ago, I noticed that texts were taking hours to come through. I then noticed that calls were never coming through and going straight to voicemail. Called 3, they blamed the phone but made sure call diverts were off anyway.
Calls were still going straight to voicemail but occasionally when phoning my number, I would get the dial tone but my phone wasnt ringing. I then put my misus t-mobile sim into my phone but I was getting the exact same problem, no calls were coming through. Couldnt put my sim into my misus phone as its sim locked.
I called 3 again, they said it must be the phone. I phone Amazon, they say phone HTC. HTC couldnt help so Amazon agreed to replace the phone. I now have old and new phone in possession. Using my old phone earlier today, I could no longer send text messages but I could receive them ok. The occasional call was coming through but most werent.
Ive now just set up the replacement phone. Everything was working fine for the first 5 minutes but now I cant send texts and calls arent coming through again.
Logically thinking, it surely cant be the phone and must be the sim card, but then again, my misus t-mobile sim showed the same problems in my phone which suggests it is the phone!
Im obviously going to phone 3 tomorrow but I want to be prepared for my argument. If it does end up being the sim, how can I explain to Amazon that I have opened the replacement phone but now need to send it back because there was nothing wrong with my phone in the first place. Surely they would be entitled to charge me or something for doing that?
Hope it all makes sense and I look forward to your responses!
EDIT: Forgot to mention that data is working fine. my 3g connection did drop at work the other day for no apparent reason, but calls and texts were working fine during this period, I guess its more when connected to 3g. There is no gsm only mode to test the phone either!
EDIT 2: Sometimes when calling my phone, I get the dial tone but my phone doesnt ring. However when the screen is on and the phone is out of standby, my phone receives calls fine! It does sometimes goes straight to voicemail but its just so confusing! I just did a test there, phone in standby, called it from my landline. I get the dial tone, but the phone doesnt ring. Whilst im still calling it, I wake my phone and it starts ringing! What the hell is going on!!!
Just a quick update and really hoping someone can offer some input!
I am at work just now, about 5 miles from my home address. So far today, my phone has been working fine at work. I visted the 3 store just round the corner from here, told him my story and he sadi it must be the handset due to the same issue with a t-mobile sim. I did mention the 3/t-mobile network sharing agreement and how they could be connecting to the same masts but he was adamant that no such thing exists. He also argued that the auction for the old analogue spectrum was for additional 3g capacity and not 4g. I did argue with him but he was clueless!
Anyways.... My phone worked fine in the shop so he said test with another sim card and if the problem persists, they would change the sim card. Ive came back to work and again, everything works well. I tried a vodafone sim card and again, all is ok!
When I think about it, my phone has pretty much worked fine when at work apart from not being able to connect to 3g the other day. This leads we to believe that there was be something wrong with my local mast at home, but if this was the case, why has it not been widely reported? Then again, the T-Mobile sim didnt work in my phone when at home, but worked fine in my misus htc desire. I have noticed that she is connected to 't-mobile orange' for 3g when its usually just 't-mobile'. Is it that her phone recognises a problem so switches to an orange mast?
This is doing my head in!
Thanks
EDIT: Sorry for posting in the wrong thread, I did wonder if I goty it right but clearly I didnt!
Please use the Q&A Forum for questions Thanks
Moving to Q&A
So I installed CM7 following the wiki on there site, using Revolutionary.io Everything worked fine, got s-off, installed the CWM recovery and then installed CM7. Well when I boot to CM7 the phone is telling me that it is no longer activated. It worked perfectly before. Ive rooted several EVOs on Sprint in the past and have no issues, didnt know if anyone had has some similar problems before and what they did to fix it.
This is a common Revolutionary bug.
You can try to take the battery out for a full minute and then go to settings, update, update profile. Then update the PRL. This did not work for me.
If that fails you need to try to send text messages and record the error codes when they fail. Call sprint from a different phone and give them those codes (dont tell them you rooted or s-off'ed) Hopefully you get someone with half a brain and they ask you for the IMEL code (behind the battery) and reset your phone. It took me 3 calls (and resets) to Sprint over a week but finally it stuck. On a friends phone it only took 1 reset by Sprint to get it to work. If you have any call or text failures after Sprint resets it you need to call them again.
I personally believe this is caused by a failure in the hands-free activation mechanism preformed after running Revolutionary.
Is it possible that you flashed a GSM rom aka the wrong radios? I'm assuming you mean it has no network connections by "not activated", some more detail might help you get a solution quicker.
Good luck!
Well after some reading, people were saying that I should go back to stock and then reactivate. So I did that and when back to CM7 and and nothing. Others were saying to play with the MSL buy dialing ##3282 or 228 but I didn't have the code for it so I just went back to CM7 and it turns out it works now. Not sure why but who the hell cares. Sucks that Revolutionary has those issues. Its worked great for me so far.
I had this happen too right after I rooted a week ago using Revolutionary.
It's no big deal and you don't need to waste your time switching roms or jumping through hoops just call Sprint and tell the your phone just stopped receiving calls.
In my case my 3g data worked but not texts or calls. I called Sprint and just said my phone wasn't making or receiving texts or calls and I wasn't sure why.
They just reset something on their end or whatever they do and I was good to go. No need to do anything else.
Sent from my PG86100 using xda premium