Yesterday I installed the WM6.5 Build 23047. I works perfect accept mij wifi-connection with my conceptronics.
Normally I use WPA2, but that doesnt seem to work on the WM65. So I configured the Conceptronic to WPA-PSK, but still WM65 won't connect.
The connection itself becomes visable, but stays 'unavailable' whatever settings I change on the WM65 for this connection.
Can someone please help me?? (Yes, I tried WeFI, but hee see no spot at all)
Thanks for your reaction
RobLork said:
Yesterday I installed the WM6.5 Build 23047. I works perfect accept mij wifi-connection with my conceptronics.
Normally I use WPA2, but that doesnt seem to work on the WM65. So I configured the Conceptronic to WPA-PSK, but still WM65 won't connect.
The connection itself becomes visable, but stays 'unavailable' whatever settings I change on the WM65 for this connection.
Can someone please help me?? (Yes, I tried WeFI, but hee see no spot at all)
Thanks for your reaction
Click to expand...
Click to collapse
You do disconnect activesync before connect Wefi.
becoz the input la.
Related
Hi Guys,
really dumb question ... how do you disconnect from gprs once connected ?
I can not see an end button anywhere !!!
cheers
i have just worked out that if you disable phone, it turns off GPRS...
surely that is not the correct way to do it? :roll:
sorry to nag .....
does anyone know how to cut gprs once connected ??
maybe its so obvious, noone knows it !
maybe its so easy, no one can be bothered to write ?
let me know please !
install monitor
Install the spb gprs traffic monitor is the answer.
You can also simply tap the signal sign (at the top of today screen), it'll show your GPRS connection and then you can simply tap end buttom Cheers
not on ppc2003 .,... there is no end button on the signal sign :-(
Install the spb gprs traffic monitor is the answer.
-----------------------------
is this the solution for PPc2003 ?? surely there must be an inbuilt feature which allows you to disconnect GPRS without the need of installing other software ??
please advise
I have the same problem and i asked in deffirent places in this forum but no anwser till now.
ARZLEB said:
Also i have a problem when connecting to GPRS there is no d/c button i had to push long the red close button to d/c my GPRS session after 5 seconds exactly i will loose service signal i have to turn off/on phone to re obtain signal!
any one noticed this?
:?
Click to expand...
Click to collapse
I hope someone would anwser this!
Can maybe the developers step and and show us the light?
Much appreciated :wink:
now have you got ppc2003 to connect to uk 02 grps?
what the correct settings as i can not get mine to connect at all
please pass the on
hi grim,
sorry mate, i only use Orange Gprs :?
try
Homepage: http://pda.o2.co.uk/
APN address: mobile.o2.co.uk
Username: mobileweb
Password: password
Email servers (POP): mail.o2.co.uk
Email servers (SMTP): smtp.o2.co.uk
DNS Servers: 193.113.200.200 and 193.113.200.201
nope I can not get it to connect to grps at all
i must be doing something wrong? anyone done it ok to 02 uk grps?
This appears to be a "new feature" of WM2003, always on GPRS . It does seem to timeout the connection after a little in-activity.
I'm in the same boat and cant for the life of me imagine why they have programmed this way. I can only imagine it's a bug and will be fixed.
Thought I was just stupid
We'll technically I am I was soft restting to stop it to start with
Looks like I'll have to put on Spb mon
You can also turn off the phone (tap the reception button and click "turn phone off"
and turn it back on !
also cuts GPRS
Right, Ali-Butt, it's also the way I do it ! : turn the phone" off",GPRS is also diseable, then come back to put the phone "on" ... if someone find a better way :idea: ....post-it please
Well the best solution i discovered is to use Sbp GPRS monitor, since you wont benefit from the Auto Connection / Disconnection while checking your email since the device will connect but never d/c. So all connections and d/c and done manually by you instead of using the Off / On methode use the Disconnect button in the GPRS monitor for the time being until they find a solution for this bug and yet you wont have to turn to phone off and on, consume power or someone calling in this exact min to find that your phone is switched off.
If you dont have Sbp GPRS monitor i am whilling to share it with the ppl having this problem.
:wink:
I've installed 2003 and it's all great. A few problems with the syncing but after 3.7 (strange, I had 3.7 anyway though since I've reinstalled it off the MS website it looks different to the 3.7 it used to be??) it did eventually work. Scary few mins though!!
I bought All-locations GPRS counter a few months back, but the one thing it doesn't really have is an end connection button. I also bought SPB's PocketPlus but it's saying that it's not compatible with PPC 2000????? Does anyone else have this problem? I've tried logging onto their website but it seems to be down all the time. This program used to automatically cut the gprs connection if say I'd loaded MSN and then shut it down. Very handy!! If anyone knows how to get past this or where they've put an update to work on 2003, please let me know.
In the meantime ARZLEB, if you could find it in your heart....
Cheers
V
'Always on' is a great idea, PPC2003 can disconnect automatically and re-connect when a phone call comes in so why is it an issue? The only reason I can think of is cost (if you have something polling the internet racking up MB's).
For delivering mobile applications and corporate push E-mail, this feature is essential.
These devices are not really targeted at the consumer market more at the business user so the carriers will love this feature to deliver extra services and generate GPRS data revenue.
Hi All
the best solution is the easy one , simply press on the hardware button ( the red button ) for about 2 seconds and it will disconnect the GPRS Connections !! easy ha !! :wink:
Cheers
Ahmad
Hello i have PDAVIET 4.0.0.0.4 and i have a problem when i m connected to a wireless spot, and i want to signin to msn it uses my GPRS connection although i am already connected to the internet.
Any suggestions?
Thanks!
click cancel on baloon tooltip,and i'm not sure about your rom version,pdaviet maybe?
yes sorry
))) did you solve the problem ?
nope sorry
I'm with rom 4.0.0.3a and I also experience this. I tried using Live messenger connected to activesync through usb cable connection, but instead of using the activesync connection, he tries to connect over gprs!!!! Argghhhhh!!!
Beside iassael, the others who run 4.0.0.4 are also experience this bug??
i think so and i also had the same withh 4.0.0.0.3
well, I don't have wifi by my computer, but I soon will, so I'm interested in this issue...what about trying what this guy says;
It is a solution to a different problem, so maybe a bit of a long shot, but something he says there;
The beauty is that Windows mobile knows it needs to use the "GPRS Internet", only when other connections are not present.
Now you don't have to mess with selecting a proxyless connection when connecting to a WiFi source, or using activesync
Click to expand...
Click to collapse
made me think it could be worth a try.
http://forum.xda-developers.com/showpost.php?p=1283391&postcount=1
did you fix it?
I dont see how this will work. If default is set to not GPRS, you have to have wifi or connected to computer. it will not use GPRS as backup. at least i havent been able to get it to think that way on WM5 and WM6.
any solutions to the login problems using ? I still couldn't access MSN with PDAVIET 4.0.0.0.4 ROM
Dear guys could some one try to explain me how configure my TC500(S200)??
i just update from WM6 but I don't know how configure to WiFi.
Thanks
Ema
turn on wifi via comm manager
goto settings -> connections
click on "wifi" or "network cards"
select your access point and enter in your info.
it doesn't switch on
When i click on comm manager the wifi doesn't come in blue color and it remain with a x after try to change.Bluetooth works propely,it's connect with my holux gps antenna....How could I do for to enable the wifi???
Thanks
Another things is that when I go in connections,will be appear:
Ad new connection
or
My company name
Add a new modem connection
Add a new VPN server connection
Set up my proxy serve.
If wifi isn't turning on, I can't help you there. maybe it's broken. who knows...
what rom you are use? some wm6 roms make troubles ... please read all entrys in the threads about your used rom!
I WiFi some times works and some times don't work like a bluetooth,and all connections go right!!!But i have to resolve still a problem.The file Init_tray olweys not opened.And I have the problem with contact,I can never found a contact!!!And when I add a contact in touch cube don't happen nothing!!!!What I can do???
I'm using Fantastic Mobiz v2.0b4 from
Fantastic b4 (Official) Step 1
http://www.badongo.com/file/3633747
and step 2,another problem is it activesync doesn't syncronise never.
So just three problem:
1_bluetooth and Wifi work saltuary
2_Contacts never work.
3_Activesync doesn't syncronise
n.racing said:
and step 2,another problem is it activesync doesn't syncronise never.
So just three problem:
1_bluetooth and Wifi work saltuary
2_Contacts never work.
3_Activesync doesn't syncronise
Click to expand...
Click to collapse
did you do a propper hard reset?
press camera and commanager button and put the stylus in the smal hole beside the usb port hold this something is displayed on the screen and then press the green phone button.
Green button???Wasn't commander+camera+reset only??
Yes Idid it more then one times,but when start always appear init_tray. can not be opened..So sad...Some other possibility?
Hi,
I've been using WM5 on my Prophet for ages with no probs at all.
Decided to finally take the plunge and upgrade to WM6 & HardSPL'd my device.
I've tried a few different roms & all have installed successfully etc apart from one recurring problem - WiFi connections only connect 50% of the time.
The WiFi seems to turn on but doesnt automatically connect to the AP. If you turn WiFi on & off it connects OK. When the device doesnt automatically connect, the AP is showing as 'Available' in "Wireless Connections" and you can force a connection by clicking on the connection & clicking connect.
This is a bit of a pain as I quite like using Korands rom, but I may downgrade to WM5.
Any help?
Cheers
fast and acurate..
racingclub said:
Hi,
I've been using WM5 on my Prophet for ages with no probs at all.
Decided to finally take the plunge and upgrade to WM6 & HardSPL'd my device.
I've tried a few different roms & all have installed successfully etc apart from one recurring problem - WiFi connections only connect 50% of the time.
The WiFi seems to turn on but doesnt automatically connect to the AP. If you turn WiFi on & off it connects OK. When the device doesnt automatically connect, the AP is showing as 'Available' in "Wireless Connections" and you can force a connection by clicking on the connection & clicking connect.
This is a bit of a pain as I quite like using Korands rom, but I may downgrade to WM5.
Any help?
Cheers
Click to expand...
Click to collapse
try micro wm6, it connects wifi perfectly and automatically,,,
but please read the cons ( e.g. no word suggestion by default... ) before upgrade. ^_^
dioxda2 said:
try micro wm6, it connects wifi perfectly and automatically,,,
but please read the cons before upgrade. ^_^
Click to expand...
Click to collapse
What kind of encryption do you use, WEP, WPA, WPA2...?
hey all,
since I use WM6 Roms on my prophet I experienced excactly the same problems! Thanks racingclub to face the prob! I tried so many different ROMs an all have the same issue.
I use a basic WEP128Bit hex encryption. My current ROM is ProphetTouchXB.
Any solution so far?
I have the same issues, also with WEP 128 bit encryption. The issue only seem to happen with WEP encryption and I tried most recent ROM's. All have the same issue. I have not found a solution anywhere
WEP cannot auto reconnect.
i have reported this long time ago.
no solution now
hihi
rondol1 said:
What kind of encryption do you use, WEP, WPA, WPA2...?
Click to expand...
Click to collapse
I use the wep setting
my setting in the router
1. shared,
2. wep
3. xxxxxxxxxx ( password)
4. done
P.S.
1. Micro WM6 ( 80MB)
2. I don't mean after soft-reset, I mean power button on and off, it connects automatically for me.
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.