newbie - lost start-up sound - Hero, G2 Touch Q&A, Help & Troubleshooting

Hi,
after flash new rom, lost the start-up sound ...
ther is any way ti have ?
Tks for help

hummmm
i take it you have flashed the cooked rom???
if so read the chef's info in 1st post.
states sounds removed....but also tell you what to do to put it back
good luck

jonata said:
Hi,
after flash new rom, lost the start-up sound ...
ther is any way ti have ?
Tks for help
Click to expand...
Click to collapse
See these posts
http://forum.xda-developers.com/showpost.php?p=4487600&postcount=875
http://forum.xda-developers.com/showpost.php?p=4487919&postcount=876

tks so much for help !!!

try the 2° method with adb ...
edit the boot_animation.xlm and put the value "1" in the 3 places ... then push the file to hero but no result ...
always without start-up sound .
any idea ?
Tks

Related

Help For O2 Atom Camera

I Install Wm6 On My Divice ,but Camera Is Not Correctly .downgrade Is Not Usefule...how Can I Flash Rom It?????
Thanks.
hhpol said:
I Install Wm6 On My Divice ,but Camera Is Not Correctly .downgrade Is Not Usefule...how Can I Flash Rom It?????
Thanks.
Click to expand...
Click to collapse
First of all, what device are you using? then what ROM did u flashed your unit? please read the thread were you got your ROM. maybe there is an answer to your query. enjoy reading =)
hhpol said:
I Install Wm6 On My Divice ,but Camera Is Not Correctly .downgrade Is Not Usefule...how Can I Flash Rom It?????
Thanks.
Click to expand...
Click to collapse
Bro,
Please elaborate your issue precise and in detail, else I don't think the Guru's here won't understand what are you trying to say.
hello my friends,and thank you for your attention .please forgive me because of my note, but i really need for help, my device is o2 atom pure an i used pdaviet wm6 flash rom ,please teach me how can i it over clock cpu for downgrade .my problem is that the image is converted and the image frames are shown very slowly .and when i try use the camera it is not load for first time and i shoud be try again it
hhpol said:
hello my friends,and thank you for your attention .please forgive me because of my note, but i really need for help, my device is o2 atom pure an i used pdaviet wm6 flash rom ,please teach me how can i it over clock cpu for downgrade .my problem is that the image is converted and the image frames are shown very slowly .and when i try use the camera it is not load for first time and i shoud be try again it
Click to expand...
Click to collapse
I believe medkid is the author of your ROM, you can try and read thoroughly the thread and ask this query if no one has this situation. there could also be a quick fix for your problem as well. Im sorry but I haven't tried his rom.
do you want to overclock the unit? or do you want to downgrade the cpu clock? you can use XCPUScalar to do the job,
hope this helps

Qtek PH10B Rom update pls help me.

hi guys
how do i update my PPC ROM? i mean wat exactly i need it to do so. i did download rom form forum but i've absolutely no idea how to flash my PPC wid it any help will be much appreciated
Regards
which ROM do you want to Flash to your Hima ?
also, you could take a look at buzzdev.net, there are good How-To's there... here too, try the "Search" Link in the Bar on top of the Board here.
tnx buddy for quick response. well actually my PPC start only in dos mode how to start in normal mode? pls help me i did search a lot but i am totally confuse wat exactly i need to do?
here is model details
Qtek PH10B
please help me
Regards
well, when you download a ROM Package, there usually is a textfile whithin it with Instructions on how to flash the ROM to your QTEK.
Just follow these Instructions WORD FOR WORD, do not deviate from the Instructions given and you should be good
tnx for the updats buddy i did flash my PPC successfully. can u tell me how to remove old software coz every time when i start my PPC a popup windows apear and sys stk not found bticon not found bla bla bla......... how to clean my PPC?? pls help me tnx in advance
regards
Usually it's done through the Settings Menu and "Remove Programs" or something like that... although it could be that you need to do a hardreset as described in the ROM Update Infofile... that the Device is complaining about Software not being found could be due to a not formatted storage and/or registry after the Flash Process.

HTC Touch Pro

knox203 said:
VitaPSG,
You would be more likely to get help by starting a new post, rather than piggy-backing someone else's post.
Just a tip!
- Adam
Click to expand...
Click to collapse
Here it is !
(I'm french and I live in Paris, please forgive me for my bad english !)
Hello everyone !
I'm a new user of the HTC Touch Pro.
I've successfully cidunlocked my phone. (When I'm going into the bootloader, i can read "1.90 olinex")
I'm currently using this rom : "|RAPH|6.5|ROM|WWE| ★ EnergyROM 3.0 'Phoenix' (21812) ★ || Build date 2009/6/12 ||"
I'm also using "Raphael Radio 1.14.25.35"
I've got several problems with my phone :
First of all, I'd to change the hardware keyboard in order to put it in french :
Rottis said:
FOUND IT!!
I tested this myself on an swedish raphael, and it works perfectly!
1. Install a Registry Editor program if you already don't have one. I use PHM Registry Editor found here: http://pocketland.de/util/getdownload.php?regedit.Mrln_ARM.cab&id=22357
2. Go to HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD
3. Search for Curlang
4. Change the value of Curlang to 1044 (means Norwegian-bokmål)
5. Soft-Reset
6. Enjoy!
Hope this helps you guys out there to finally install those cooked roms without keyboard issues
I almost gave hopes on this one, after many many hours of googling and testing it worked, how relieved i am now!
Click to expand...
Click to collapse
I've tried : i've changed the value of Curlang to 1036 in order to put my keyboard in french but nothing has changed !
Please help me !
Black C5 said:
You may find some help on this thread...
http://forum.xda-developers.com/showthread.php?t=425045
Click to expand...
Click to collapse
I've tried this way but with no results ...
Help please !
Hattori_Hanso said:
Hello everyone
The rom turned out very well, only that trouble of mine with him, how it does not distribute the level of a battery properly. I see the good level after a reset always only. This is enough serious error because of that. Please help me.
Click to expand...
Click to collapse
We've got the same problem here ...
I'm also forced to do a phone's soft reset when i'm connecting it to my laptop (usb connection) or when i'm charging my battery's phone !
I was also wondering if you'd be king enough to indicate me a substitute for WMP, that could read videos with an "avi extension" (.avi) ?
(I've tried a cracked version of the "Pocket Player" but it wasn't functionning well on my phone ; actually it was crap ...)
Hope you'll understand what i'm trying to tell you all !
And again i'm apologizing for my bad english !
Best regards,
Thanks !
Anyone, please ?
VitaPSG said:
Anyone, please ?
Click to expand...
Click to collapse
not really sure what the issue(s) are but I think you need a FRENCH ROM.
The thing is i'd like to stay with the energy rom because it's a great rom ... but i'd also like to have a french keyboard ...
I really don't want to put a french rom on my phone, because i think there is no french rom which is as great as the energy rom.
I have another issue with my phone : sometimes when i've just end the connection with my laptop i get this message : ""nameoftheapplication".exe is not a vaild pocket PC application"
Whan can i do about it ?

Htc p5510 (neon100)

Hi, i have been working on this since yesterday and still i haven't got the right ROM for my device. It's HTC P5510 (NEON100) device (16keys).
So far, i have tried different ROMs for NEON and they all don't support 16key keymapping, i have tried several that would stock my keypad input to numerics only, it would only input numbers, tried every cab/hack/tweak that i found and still nothing.
I even tried hex editing some Niki/Nike ROMs to run on my Neon, but still my problem is the keymapping.
So i would really appreciate if someone could point me to a NEON100 ROM that supports 16keys.
Thanks you in advance!
Anyone pls?
da_mayhem said:
Anyone pls?
Click to expand...
Click to collapse
You already told us that you tried every cab, so I'm almost sure you have read this thread but I thought I gonna give it a try and hoping you missed that one.
Also take a look here it could be also interesting for your Neon100.
Succes
Hi, thanks for replying bro.
The 1st link, yes i have tried those. And yes, it doesn't solve my problem.
The 2nd link, yes already read that thread and there is nothing good for me there, only a dumped and rebuilt stock rom of NTT DOCOMO HT110, which is a non-WWE ROM, it's a Japanese ROM.
Still no luck for me, i'm about to download your ROM and give it a shot, if all goes well with your ROM, all the praises to you bro!
Thanks again
@Rataplan - I tried your ROM bro, it would successfully be flashed but i can't boot, not even to the screen alignment screen....
da_mayhem said:
@Rataplan - I tried your ROM bro, it would successfully be flashed but i can't boot, not even to the screen alignment screen....
Click to expand...
Click to collapse
Thanks for the info, I build the kitchen with the dumped rom because I couldn't find an original rom, I will send you an pm if there is any progress from my side, if you are interested ?
Greetz,
Yes bro, no problem, just let me know.
Thanks!
Finally got it right! I flashed a cooked Neon (200) ROM and it was originally for 20keys..
Installed EzInput 1.5 plus Lang Pack = All keys inputs only numbers
Did a Reg edit:
HKEY_LOCAL_MACHINE\Software\Tegic\eT9\IME\CarrierDefaultTextMode = 0 (dword)
..and finally got it right.
Thanks to all and to Rataplan!
Great job buddy, can you give me some more info about the rom you use ?
Greetz,
Hi
it's jony_aa's ROM
Here's the link
CLICK HERE
HI! I have P5510 SIM LOCK from Korean SKTelecom
How can I unlock thise HTC? Where can I download a solution to unlock Touch Dual?
@dimokaktepa - Buy unlock code online...
Flash HardSPL for Neon by Olipro, flash a cooked WWE ROM before you can enter the code.

[Q] uptodate 18.3 on wm 6.5

Hi all,
i need some help with uptodate 18.3
i am using Jackos S3 v1.03 smartmove rom(6.5 with sense 2.1) on my rhodium (t-mobile USA)
issue is when ever i want this medical reference software called "uptodate"to work for me it just shows me a blank screen.i've tried v18.2 and that too didnt work for me.
issue is(explained below)
1.when i click on the program icon from start menu it shows up "screen001"(please see attachments);-------which is good
2.Next when i type something in it(as shown in "screen002"),its still good
3.and upon hitting "search" in windowd it pops up the "screen003"-----everything is smooth uptil now
4.but when i select any of the topics it shows up blank screen as shown is "screen004"and my device is still functional and i can browse back and forth but it shows no data
*so bottom line is:this does not hang up on me but refuses to show any data,please help me in this regard...i can switch to another rom if necessary but i really need this software desparatly
*there is also 1 more thing when i select "table of contents" which is shown in screen001, my device gives an error shown in "screen005"(this screen005 also comes up when i select "about" from "menu" in screen001
please help me rectify this issue..i shall be really thankful to u guys
Thanks
Take care
i m sory, its a litle out of topic question bt i wana knw whre i can get the dvd of uptodate in lhr, or in pindi/isd? I ve omnia, rom dont knw, coz i m new in using. Ur help ll b highly apreciated. 2ndly can i install uptodate èout active sync?
Please do some search first on this forum.
Try this thread, first post.
Or try the cab in this post (=same thread).
iris_aim said:
Hi all,
i need some help with uptodate 18.3
Click to expand...
Click to collapse
Your first request too offtopic indeed . You are not at the right forum for this question.
Your second question: yes you can install UTD without activesync.
tabi_window said:
i m sory, its a litle out of topic question bt i wana knw whre i can get the dvd of uptodate in lhr, or in pindi/isd? I ve omnia, rom dont knw, coz i m new in using. Ur help ll b highly apreciated. 2ndly can i install uptodate èout active sync?
Click to expand...
Click to collapse
sorry about posting it here
didnt know the right place
though i tried a hard reset and installed UTD 1st thing on it along with fix uptodate by doctorcete
so thanks every body...

Categories

Resources