hello guys, I used JTAG method on my rw 6815. now by pressing camera button and inserting the battery start bootloader mode, but when I connect to the PC via USB for firmware update comes out the message "unable to communicate with the device" Can you help me?
I think the problem is the file EBO_a.nb0 contained in the folder JFlash_MM this file is good for atom and not good for rw6815 .. is it possible?
sorry for my english.....
Related
Yesterday, I update WM06 from WM05 on my Atom but it was not complete. Now when I press power button, phone appear "DSUU MODE" and nothing happen. If I open phone in bootloader mode, I can choose OS system and start phone normally. Now I can't up rom anymore because "ERROR: CONNECTION". Please help me.
"Plug in USB and re-enter the eboot"
I uprom WM06 for Atom Life from WM05, it stop and everytime I press power on screen appear "plug in USB and re-enter the eboot", phone can't start. How to solve this problem? Please help me!!
Hi,
Go to boot loader mode
Connect USB cable
Reflash ROM
Donot unplug USB cable until u see "Device Clean boot" message.
Thanks.,
I did it.
I did as you told. But My PC notice :"CONNECTION ERROR". Seem my phone didn't connet PC on bootloader. I try on 04 PC and the same result.
Can you copy the image file .nb0 to mini SD card and try bootloader
Image file *.nb0
Atom life rom don't have Image file *.nb0, It have exrom.img and flash.dio. I copy this two file to SD card and uprom from card. But it still broblem, power on, screen appear "DSUU Mode, plug in USB and re-enter the eboot".
May be remove the battery and wait for some time before you go for bootloader mode.
Thanks.
The Eboot?
How to re-enter the Eboot for my Atom Life?
Any Hope?...
if you press camera button and press reset hole using stylus.. atom should go into bootloader mode?..
No Hope!
Now can't enter bootloader. My Atom Life can't turn on, only black screen. DEAD!!
ironeagle said:
May be remove the battery and wait for some time before you go for bootloader mode.
Thanks.
Click to expand...
Click to collapse
have u follow #7 instruction,my atom ever happened like this,i remove battery for an hour,after put battery back , it can start to bootloader again
Maybe Atom Life is not the same Atom and Atom Exec.
I try a lot of time but no result. It still dead.
Any hope?...
Try to plug the USB cable to another USB slot or using a USB 2.0 hub. sometimes USB and USB cable having problem with connecting WinCE devices with WINXP.
help pls my atom always in boot loader mode, i have try upgrade to wm6 jiggs rom or the official o2 rom, but always stuck in bootloader mode can anyone help me pls
sorry my bad english
Pls explain what you did and what is the current status of your device clearly..
I think you should be able to reflash. Does it say "connect a USB cable" on screen, or is there just a jumble of text like a DOS prompt?
Try connecting via USB and run the update executable again. That usually works.
If that isn't your problem, I'm currently not good enough to solve it for you.
Had the same problem flashing WM6.03 before. Changed the USB cable and reflashed. It worked. Sometimes the problem is in the connection no the device or PC.
yes the device say "connect a USB cable" but i already flash 4x time = 3 x time with the official o2 rom 1 x with wm6 aku7.0 from jiggs, but it's doesn't work my atom stuck in "connect a usb cable", pls help
yes i already change n reflashed but stuck in screen "connect a USB cable" n i tried soft reset but once again back in screen "connect a USB cable" any one can help me what rom i should reflash for bring back my atom,
Methinks your flashes went wrong because it didn't flash the extROM successfully. This only happens if you're using the hacked Atom Exec ROM on the Atom. <_<
When I ended up like this once, all I did was keep on trying and trying again until the entire procedure goes right through (it will do so eventually). That's the only answer I know.
I can't help any further.
yuberthegreat said:
yes i already change n reflashed but stuck in screen "connect a USB cable" n i tried soft reset but once again back in screen "connect a USB cable" any one can help me what rom i should reflash for bring back my atom,
Click to expand...
Click to collapse
read the Atom Wiki under upgrading problems.
first i was trying to upgrade system from O2
something goes wrong and ERROR showed
and i could only my xda in bootloader on
then i was trying to upgrade rom bootloader by mitty
i`ve done this steps :
you will lose all data on your device, and your sd-card, so make a backup first*
make sure there is no sd-card in your device.
boot your device into bootloader mode
by holding down the big action/navigator button together with the power button, and hard-resetting with the pen at the same time
now the display should say 'serial' and the bootloader version.
insert a blank sd-card
put your device in it's cradle
start mtty.exe
select 'usb' as the port in the mtty program.
type the followint command into the mtty window
d2s 60000000 00300000
this will write your radio rom to the sd-card
the last step takes very long and my pc hang up
so i treied to do the same once again but mtty showed me "usb port could not open"
and i dont know what to do know???
plz help me
sory my english isn`t good enough
regards
have you tried just putting the pda in the cradle without using mtty?
if it change status to usb serial you can run the flashtool again
Rudegar said:
have you tried just putting the pda in the cradle without using mtty?
if it change status to usb serial you can run the flashtool again
Click to expand...
Click to collapse
i have same problem...
Yes my xda-II change status from SERIAL to USB.
but in PC my xda-II detected as UNKNOWN DEVICE,
so i can't run FLASHTOOL.
i just hope if flashing to be run from sd-card
mine did that once so i rebooted and or changed usb port
Rudegar said:
mine did that once so i rebooted and or changed usb port
Click to expand...
Click to collapse
I did it, and tried to about 3 PC's winXP SP2,
and still detected as Unknown Device, i think its connector problem or hardware error
Hi! I tryed te fash my niki 200 with original rom! The flash is stopes to 42% and now i have boot mode with this message "Upgrade ROM code error! Please try again". I can not conect again to usb because i received message :"usb device not recognized". Mtty can not conect because i received the same message! There is another metod de make this device?
Have you flashed HardSPL?
Put your device into bootloader (hold b oth Camera and Power button while performing a Softreset via Stylus) and now you can theoretically flash your Provider ROM!
After that your device will work again!
I have not flashed hardspl! If i put the Niki in boot mode, show only "serial" on the screen with usb cable pluged and PC says "usb device not recocnized"!
Flashing in bootloader mode doesn't requires an ActiveSync connection so ignore it and start the ROM Upgrade! It's working, believe me! I've flashed my Niki with this method hundred of times!
I tryed to flash my niki in bootmood, but not working "error 260:conection"! My computer not recocnized my device (with or without activesync)!!!In bootmode on screen show "serial" and when i pluged the cable nothing happend (must see on screen:USB)! This is my problem!!! The computer does not alocate to my device a com port(USB). The same problem with MTTY (no USB poet detected). You understand me?
Maybe your USB drivers screwed up.
Trie with an other PC, this helped me one time.
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
bugytech said:
I tryed on other computer with Xp and other with Vista! The same problem! Not recocnized!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
I've got the same issue. Did you resolve this? I would like to find a solution
My xp doesent recognize usb connection in bootloader, (but Activesync works.. so no cable problems ) 1.16.JUMP och 1.16.0000 have same issue.. (my other htc works in bootloder)
This means I cant upgrade any roms with RUU.. can I upgrade rom by SD card ?
or any other sugestions ?
regards Magnus
You can update through SD card, just use the search button on the forum. Anyway... tried to unplug and replug the usb from the phone after entering bootloader? tried entering the bootloader and then connecting the phone to the pc?
Thank you for your reply!
I have tried every sugestion you menentioned and even more without any luck. also on diffrent xp..
When I tried to upgrade from SD I followed this:
SD 2 gb formated in Nike
renamed nbh file to "NIKEIMG.nbh" File is 110 mb
copied "NIKEIMG.nbh" to root on SD through a cardreader
pressed camera power and soft-reset hardware buttons
at bootloader screen says "loading...."
It hangs here!!
Should I use any special som image or ?
some threads says its possible to upgrade with SD some not..
downloaded the service manual and followed SD upgrade procedure.
I formated SD i PC this time, and bootloader was able to read image.
(http://mikechannon.net/PDF Manuals/HTC Niki Service Manual.pdf)
upgraded (fullimage) with SD to bootloader 1.22 but still Unkown USB device in BootLoader mode.