During the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
IPL 1.01
SPL 2.03
my device freezed at second splash screen .
Now ,when i tried to rom upgrade in bootloader mode , using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
I know it's of little comfort but you really should have 1st install HardSPL and then use the SDCard method to flash your ROM.
Anyway your best bet to unbrick is to check this table here http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick but with an SPL of 2.03 and no KITL you are probably screwed
Related
Ok ..
A friend of mine had a problem when he tried to run the SIM/CID unlocker provided by Pof .. he has an IPL of 1.01 and a SPL that says .. 1.40-olipro .. which is the right spl when you run the unlocker.. but his phone is stuck in bootloader mode.. I told him to try to flash back to official at&t rom to give his phone some life hopefully ..and when he runs the ruu it gets to 12% and bombs out on him with a update error:
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
Any ideas on what this means?
He has tried soft resetting and trying it again.
Ok he tried flashing the at and t rom again and now his ipl is 1.03 instead of 1.01 .. lol and still stuck in bootloader
lol no ones ever seen an error like that?
Hi All,
I tried flash by wizard following http://forum.xda-developers.com/showthread.php?t=298967
Every thing went well but I was not able to HARD RESET. So instead I removed the battery and started it again. It starts up but got struck at screen which says
IPL 2.21.0001
SPL 2.21.0001
GSM 02.19.11
OS 2.18.00
Could some help me what to do now. I read some threads to go to Boot loader screen by pressing "Camera" + "Reset" button and got USB at bottom left and tried RUU with some thing available on forum but every thing failed saying "connection not established"
Please guide me to solve this problem.
if ur device is CID LOCKED "G4" u need to flash the official rom 1st then flash with any G4 safe rom available >>
USING :
ShellTool
http://forum.xda-developers.com/showthread.php?t=293480
or
SoftSPL
http://forum.xda-developers.com/showthread.php?t=329147
Thats the only way for G4 "CID LOCKED"
No...
If OS is not boot up correctly, both ways doesn't work because all of them requires to do in a working OS.
You should find your stock ROM or Wizard Love ROM, use the bundled RUU to flash it so you get the device working again, then use SoftSPL/flash HardSPL and use RUU to flash OS-only WM6 ROMs.
Yes starkwong you are right. I bought my device back working by flashing it with "wizard love" now its up and running. I would proceed with Soft SPL/Hard SPL and then try to flash it with WM6.
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
londere said:
after update my hermes my phone dosent start windows after another upfate with a shipped rom the phone finish the update but stil dident start windows any suggest
ipl.1.01
spl 140 olipro
Click to expand...
Click to collapse
You might need to reflash it. Hold the two soft keys and then push the reset button. it will ask to hard reset. If the phone fails to come on after the hard reset, then hold the left 'ok' key and the power button, and then push the reset under the phone- this will take you to a tricolor screen where you can then re-flash the phone. try reflashing with official rom's, before using any other roms.
yes i do but it still in boot any sugest ipl 1.01 spl 1.40 olipro if any know how to update ipl with hard spl or how to remove hard spl it will be aprecible
My suggestion would be to try using sd to reflash the rom and see if that orks. format sd card making sure its fat 32 then put .nbh file in root directory. rename to herimg.nbh then insert into phone. go to bootloader and it should start the flash straight away. if this works make sure you upgrade spl to olipro 2.10 hard spl so its easier if there are problems. you can possibly upgrade spl this way too (get nbh file and rename hermimg.nbh). I tried this on my herme 100 and it seemed to work. it will flash the spl BUT when it restarts it will go straight to bootloader and start flashing again. as soon as it restarts get the sd card out and put on the os you want to flash. insert card and as long as you've named it hermimg.nbh it should flash new os with spl olipro 2.10. Good luck flashing.
You should read the wiki first : http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
your phone can be unbricked using the information on wiki.
only enter to bootloader the ipl dosent start also i fla**** but it stil apear spl.140oli whei in flash it with hard spl 1.10 and when i flash it with spl 2.60 oli it send me a error i try to flash it with qtek-cingular-doppod roms and nothing any suggest
any fu**ing suggest?
also it avoid me to update spl im stuck on hard spl 1.40 and ipl 1.04 i try to flash hspl 260-210 but it refiuses to stay in 1.40 radio 1.27 patched the ipl works but it frezzes with the green led dosent apear nothing
my device still blocked in boot mode i dont know if it is briked the device had the following info
ipl 1.04
spl1.40 oli
radio maybe no
os no
any suggest
any sugest to save my hermes
follow the unbrick guide link that koorosh_bsboys posted
it cant be unlocked its stuck in spl 140 olipro
did you follow the unbrick guide that koorosh_bsboys posted?
just stop trying any unauthorised ideas. let me know if i can help u. i have a friend in o2 service centre here in india. he can get ur device working. he does it by help of a software and 3 cables . it takes about 2 hrs. just let me know if u want ur device to work again
stil zombie my device im getting crazy any ideas
londere said:
stil zombie my device im getting crazy any ideas
Click to expand...
Click to collapse
If you want people to help you, you have to help yourself first!
1st of all, have you gone to read the Wiki as suggested?
2nd what methods have you tried to unbrick your device?
If you can't answer these questions then we can not help you, you keep asking for suggestions but you do not even reply to other's questions!
Here's a good place to start helping yourself if you haven't already http://forum.xda-developers.com/showpost.php?p=1465974&postcount=1
I tried to run unlocker, step 1 was successful but during step 2 there was an error and the program crashed.
Now the phone can enter bootloader when I switch on, when I try to flash a ROM I stays on %
Please help
sorry to hear that happend to you as you were trying to unlock your phone....
but when you enter boot loader what does it say at the top?
My athena also failed at upgrade... now, it only stops at opening logo..
I already have Hard-SPL installed but I don't find any program like HTC trinity Stack Overflow Exploit to unbrick it..
bootloader is still possible.. then what should I do?
and how do you use mtty?
Think before you jump to conclusions.
raf1987 said:
My athena also failed at upgrade... now, it only stops at opening logo..
I already have Hard-SPL installed but I don't find any program like HTC trinity Stack Overflow Exploit to unbrick it..
bootloader is still possible.. then what should I do?
and how do you use mtty?
Click to expand...
Click to collapse
Think before you jump to conclusions.
If it tries to boot and stops at the opening logo , the rom is corrupted but not bricked.
If you can get into bootloader you can usually resurrect without resorting to mtty ,which only really cmonex here knows how to use properly.
Check which SPL is visible in the bootloader screen and then flash an appropriate ROM.
ie SPL 1.1 > original ROM
SPL 1.2 > any spl 1.2 ROM.
lakeman said:
Think before you jump to conclusions.
If it tries to boot and stops at the opening logo , the rom is corrupted but not bricked.
If you can get into bootloader you can usually resurrect without resorting to mtty ,which only really cmonex here knows how to use properly.
Check which SPL is visible in the bootloader screen and then flash an appropriate ROM.
ie SPL 1.1 > original ROM
SPL 1.2 > any spl 1.2 ROM.
Click to expand...
Click to collapse
If you put it in bootloader screen (FULL PRESS camera button, while poking reset hole) What does it say on the "SPL" line eg; 1.1, 1.2, or 3.5? and what ROM are you trying to use?.................Hi Lakeman
Jay
athena x7500
please help. i have the same problem.
after flash with athenaunlocker after step 1 ,in step 2 my athena make error and my x7500 cannot power on but i can put it in bootloder made.
when i want to flash it with other rom it take 12% and show error.
who can help me please.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
help please
likebie said:
who can help me please.
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
help please
Click to expand...
Click to collapse
you have to load an spl 1.2 rom while in bootloader
make sure you remove your sim and sd card first
Hi, I was unlocking my htc 8525 at&t but i was using vista and my cell keep in Type 2a: When the phone boots, it goes directly to bootloader mode (tri-color screen)
what can I do to fix it... tks
Whats the info for your SPL?
Hi, I got my Hermes 8525 in boot mode what i did is to install this Schaps_WM6Pro_WWE_4.00_Full.exe now my hermes is working but i want to unlock it..what can I do cos everytime i try got in to boot mode again..any help tks.,..
SPL- 1.40
Try unlocking it with Windows XP
hi, i tried in win xp but keep the same in boot mode...
On the PC, in activesync settings, untick "Allow USB Connection".
Put Hermes into bootloader (tri-colour screen) and then run the RUU_Wrapper.exe file of the unlocker program. Follow all the instructions to unlock your Hermes and once its unlocked put Hard SPL V7 on it BEFORE flashing any thing else. After flashing Hard SPL V7, go back to bootloader and check SPL is 2.10 oli.
You now have a Hermes that is easier to recover if somehing goes wrong with a flash, excluding radio rom flashes.
Cheers...
Hi, canu put the link of the program u told me to use..tks for your help..
RUU_Wrapper.exe, Its included in any rom you want to flash. Its how you flash using the PC...
Hard SPL is in the sticky of the Hard SPl thread in upgrading section.