I can not do a hard spl to this phone, I try 115, 116, 122 but they don't work also I can not upgrade the OS, anyone out there has any look with a phone like this.
neon hard spl
use neon hard spl
Related
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
caztronics said:
my gfs hermes speaker is busted so im sending it back in for a warranty return. i talked to att and they said that upgrading with the official htc rom wont void the warranty and yada yada. the phone at this point is
ipl 1.04
spl 2.10olipro
herm 100
i have the official official htc wm6 rom for the hermes. my question is how do i undo the ipl and spl? originally it shipped from at&t with
ipl 1.03
spl 1.11
herm 100
Click to expand...
Click to collapse
I've never downgraded IPL or SPL but other than that I've gone back to original config with my UK Vodafone branded Hermes.
There is a section in Mrvanx's guide on SPL downgrading here http://forum.xda-developers.com/showthread.php?t=299462 but you may need to search a bit further for the IPL downgrade.
Good Luck.
so at this point my goal is to follow mrvanx guide and downgrade the ipl and spl and then i was planning to reinstall the officially released wm6 upgrade in the hopes that it would put its own version of its ipl/spl on the phone. the problem im encountering is when i run the downgrader the phone asks me will i allow bl.exe to run and i click yes
it goes into the red/green/blue/white screen and says its
herm100
ipl-sspl by des
herm100
spl-1.09.ds
wtf is that? it wont let me go past this point, ie i get an error when it tries to verify information from the phone. i can restart the phone and it goes back to windows and olipro2.10 --- im not sure what direction to go? should i try to put an original wm5 rom on the phone then try to downgrade again or what?
hard spl is the way to go i think
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=30&Itemid=27
i have hard spl 2.10.... im trying to get rid of it and return the phone to factory like conditions, well not really factory cus im going for the official wm6 but essentially i cant send my phone in for the warranty with olipro on it so im trying to ditch it, but the posted methods arent working for me
Searching returned almost 30 different threads. Have you looked here
http://forum.xda-developers.com/showthread.php?t=314107
Are you following the MrVanx guide carefully? I have never had an issue following the steps carefully. The info you are getting is because it is using the force SSPL option, which it should. I would suggest you try again, following the directions very carefully. Good luck. It really should work.
when it gets to the screen where i see spl-1.09.ds the ruuwrapper provided from mrvanxs guide says "Verifying the information on your Hermes... Please wait..."
this is where i get an error 260 and its asking that i check the usb cable and what not which i know isnt the issue. im gonna try this on the other comp in my house which is xp. i have been trying this on a vista machine
so it worked on my windows xp rig. once i downgraded the spl, i reinstalled the official wm6 and it upgraded the ipl to 1.04 and the spl to 2.03 which im happy with and have already placed my order for the warranty exchange.
thanks for the help to those who helpful
I have shaps 7.1
and i'm trying to flash hard-spl 4.7 and the screen turns black and I get 260 errors and 202's and **** saying it lost sync connetion so please help me I gotta figure this out so I can upgrade. thank you.
[email protected]...
thank you!!!!
WTF????
Hard SPL comes in a few flavours, the most popular being Hard SPL v7 (2.10 olipro) and Hard SPL V9 (2.60 olipro). V9 is the developers SPl, good if you are making apps and roms but not so useful if you are just a layperson.
If you are trying to install Hard SPL 4.7 then I gotta believe its either a typo or you are trying to flash the wrong SPL for your device, the Hermes. Fastest way to a permanent brick I know...
If you want to Hard SPL your phone go to this thread - http://forum.xda-developers.com/showthread.php?t=296722
If you still have problems with sync errors then go to post 1160 on page 116 to find out how to use the SD card method.
Cheers...
hey folks, got a CDMA Neon400 here.
I managed to find a tested/working Hard SPL for neon, but I am unable to find a working SSPL. I tried the nike SSPL in the sticky, but it forces my phone to black screen and the pc no longer reckognizes the usb device, forcing me to soft reset it back into WM 6.1 Pro.
Anyone who can point me in right direction for a working SSPL for neon, so I can apply this hard spl? I Figure there must be one out there since alot of neon users are using the neon hardspl.
Thanks
Please I try to update my htc
herm200 and there is block of 3 color
when I try to update it hangs on 12% or
11% (other Rom) how do I appeal to you if I am
sad
ipl-1.04 spl 1.40olipro wm6.1 but now i havnt
i have try to do a hard reset but dont work in my ht
Hope you have a copy of your SHIPPED STOCK ROM... You need to re-flash that then update your SPL to Hard SPL V7. The Hard SPL you have is an older, less safe version.
If you don't, you may have corrupted the radio rom on your Hermes which means you can install Hard SPL V& but the radio (phone) won't work ever again. Even with the SHIPPED STOCK ROM there's no guarantees...
I'd like my phone turns on again I have nothing to do with the radio
is that you can help me? please explain me again what I do and thank you very much
thank you
i have find a solution Here
thanks 4 you
I've have spent most of the day searching and trying to sort this out with little luck.
I had IPL - V2.02
SPL V 1.10
Radio 1.50
So I thought I would try and upgrade.
Bad idea.
On the boot screen I have
IPL 2.02
SPL 1.20
I've tryed to install a few different ROM's but they pull up a half black half gray fuzzy screen
I don't have SPL 3.5 so I can't install a lot of them and I've tryed to install a 1.2 ROM but its not having any of it.
What am I doing wrong?
I've been working my way though a few post about this problem.
But it is going no where.
I get
244 model errors
30 and 260 connection depending on what I am trying to do
I've try, ap4 1.2, radio 1.57 & 1.58, spl 1.2 & 3.5
loads of diffrent ROM
none of it is working
I can get to the boot screen
and can see
'P(unreadable text)
IPL - v2.02
'P(unreadable text)
SPL - v1.20.Oilpro
So the orignal unlocking must have semi worked.
Please help I'm out of ideas and going round and getting know where
solution
Hi mate
read this thread
http://forum.xda-developers.com/showthread.php?t=405814
and its links
see cmonexs post no 14
If you follow the instructions(read the whole thread first)
you should be able to fix the invalid model id.
somewhere along the line you flashed the wrong spl and stuffed the id
don't worry , most people including myself have done this.
Oh and make sure you remove simand sd card and have a full battery before flashing
Thanks for the advice all sorted now