my wb6.1 kumara version cant play video,sound became slow
cannot read pdf,doc,xls with included in wndow office. can sombody figure out
what shoukd i do? im just thinking 2 downgrade it 2 wm6.0 or somting.. anyone??
addean7469 said:
my wb6.1 kumara version cant play video,sound became slow
cannot read pdf,doc,xls with included in wndow office. can sombody figure out
what shoukd i do? im just thinking 2 downgrade it 2 wm6.0 or somting.. anyone??
Click to expand...
Click to collapse
you better use the helloworld wm 6.1 rom. it's clean, fast and more efficient on battery
asdf
where can i find the version? can som1 give me the link please?
addean7469 said:
where can i find the version? can som1 give me the link please?
Click to expand...
Click to collapse
here's da link bro :
Atom release 1: http://www.mediafire.com/?xixrdywxnjy
EXTROM(Should be installed on Atom if you want Atom's ROM working properly):http://www.mediafire.com/?tjyzmvific9
how to :
1. copy diskimg and da EXTROM to your SD card
2. press camera + soft reset button and wait for the upgrading complete (should be for 20 - 25 minutes)
it's from Master Helloworld1
enjoy
i dont understand.. coz da external was format .iso. where place that i should put the dimning and externalrom exactly?? can you give som instruction in easy way? huhu please forgive for my bad english.. im javanist huhuhu
when you use activesycn open da storage card and just put da diskimg.iso and ExtendedRom.iso in it (not in a folder) and then do the step 2
done.. but it not work..
the screen just display like this :
MN1 Bootloader bla.. bla..bla..
SD/MMC card detected..
starting download...
SD transfer completed.
i waiting about an hour but nothing change, and i press the soft reset it return to older rom (kumara).. is that my step were wrong?
when you put da two files on SD card and you press da camera + soft reset button as i told u, your atom screen should look like this :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wait until da process completed and u see da clean boot screen then u have made it
and if u still not succed, then ...
be patient my friend, sometimes something wrong happen. try to do the upgrading again and I wish u successfully with it
i dont know.. after i press button camera and soft reset in da same time
the screen become like you attach but i said sd transfer complete. it dont mention how percent upgrade it.. is that because my activsncy?
for your information, because im using window seven, my pc cannot support activesny. im using window mobile device center to syncronise my phone, tnrsfer pic,document and other stuff.. if i put the exendrom and diskming in external rom and not in storage card. what could happen??
diskimg.iso or diskimg.nb0?? because after i done download it the extention were .nb0 not .iso..
here it is, da full step for upgrading your atom addean 7469:
1. Copy da files contains diskimg.nb0 and ExtendedRom.img from Helloworld1 to SD card via activesycn,
if u use a card reader that would be great. Just remember to put those two files in da storage card (but not in a folder) like this :
2. Press camera + soft reset button and wait for the upgrading complete (should be for 20 - 25 minutes).
when u see your atom screen like this :
Wait until da process completed and u see da clean boot screen then u have made it.
good luck
in your pic that your attach, i mention that your pc using indonesia language.
im from malaysia..
i'll try my best to upgrade it..
keep up the hard work
window se7en vs xp
i try my best when i using window se7en, but the result still -ve, and then i try with my pc that using xp. they can upgrade it easier.. is that bcause platfrom windw se7en couldt support this operation?
I use 1G sd card and dont format my sd card. It isnt successful.
Whether 1G sd card can use for upgrade this ROM?
1g memory card?
for this case, u need a smaller capacity such as 128 @ 256 mb. before this, i also had a same problem as like you. try it dude
I use 2gigs and works fine
Related
Guys, to make it easy for everyone, i place this shortcuts for all of u...
this is a ARAB version ROM, But have been converted to ENGLISH...
u can use it on both ATOM & EXEC...
just extract the file after u D/L
ATOM - if u r using this ROM on ATOM, it will be stated
CE IMAGE VERSION : 7210621
RADIO IMGAE VERSION : 060711_MN2ARC_RS00011
EXEC - (I'm sorry... i dun have one... so i'm not sure... but this is actually for EXEC... it should be stated
CE IMAGE VERSION : 9140629
RADIO IMGAE VERSION : 060711_MN2ARC_RS00011
enjoy... do let me know how do u think about this ROM... i find it not too bad...
(http://www.iartis.net/store/Xda-Atom-Exec-ENG-20060915.zip)
Do you get the screen flicker if battery is removed or runs dry?
homer285 said:
Do you get the screen flicker if battery is removed or runs dry?
Click to expand...
Click to collapse
Yes it flikers, I have used it as is three weeks ago, the stupid phone wont start, tried to start it without removing the battery, no avail; removed battery and I put back, color were gone, had to restore the original april rom again.
One more thing, check out the system info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it still shows JULY Rom.
but settings r diff... and for the removing of the battery, i can... i can remove...
i dunno why some ppl cannot... once remove got problem... but i did not face that problem...
lon3lzsoulz said:
but settings r diff... and for the removing of the battery, i can... i can remove...
i dunno why some ppl cannot... once remove got problem... but i did not face that problem...
Click to expand...
Click to collapse
I wish that was the case wit me the ROM looked awsom
taiseer999 said:
I wish that was the case wit me the ROM looked awsom
Click to expand...
Click to collapse
My Atom's motherboard was replaced two months ago in O2 lab in Singapore. What are the chances that the Atom Exec's ROM will work properly for me ?
yanivw said:
My Atom's motherboard was replaced two months ago in O2 lab in Singapore. What are the chances that the Atom Exec's ROM will work properly for me ?
Click to expand...
Click to collapse
There is no way to predicte, and no rule of thumb, you have to try it, if it works; display does not flicker, remove the battery and run, if display remains OK, you are lucky.
taiseer999 said:
There is no way to predicte, and no rule of thumb, you have to try it, if it works; display does not flicker, remove the battery and run, if display remains OK, you are lucky.
Click to expand...
Click to collapse
Is it possible to reinstall the Atom 426 ROM in case of mulfunctioning of the Atom Exec ROM ?
yanivw said:
Is it possible to reinstall the Atom 426 ROM in case of mulfunctioning of the Atom Exec ROM ?
Click to expand...
Click to collapse
yes, use the temp method prior to the upgrade,
A way to do it if you still want to proceed the update .
1) Run atom 0426 rom update program, after the DSUU program extracted the files, don't click "next", go to windows/temp folder, copy those files extracted, except "diskimage_Ver.nb0" and "ExtendedRom.img", then save them somewhere else.
2) Run exec rom update program, after the DSUU program extract the files, don't click "next," go to windows/temp folder, overwrite with the files you just saved, this will leave only the diskimage_Ver.nb0 & ExtendedRom.img files as of the july exec rom, others become atom rom files, including an older bootloader which allows you to flash back other roms.
3) Flash.
Click to expand...
Click to collapse
why ican go on to flash
teeseer i do what you say but when i clink nekt the say country id errorr why? and what must i do later
the sites is slow, can anyone upload to ftp please..
After this : http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37 phone is not power on , only tri color :
onbl: 1.07.0000
spl: 1.10.olip
Please its urgent.
when i try to flash it stops at 0% :
invalid update tool
How to flash it by SD card?
Better if u do it through hard drive(PC) than SD card. Just use ROMUpdateUtility.exe (which will be in the same folder as your new Rom alongwith few dll and exe) few clicks and u r done. Write back if u still face some trouble.
Regarding tricolour screen problem see the video posted by bryangopan.Its good and explanatory.
Hope it all helps and good luck !
rex4u said:
Better if u do it through hard drive(PC) than SD card. Just use ROMUpdateUtility.exe (which will be in the same folder as your new Rom alongwith few dll and exe) few clicks and u r done. Write back if u still face some trouble.
Click to expand...
Click to collapse
Please explain
when i try to use any rom update its give error: Error(300) Invalid update tool
use newer ......
phone screen show 0% freezed bar
Ok bro'
Lets go step by step.
Tell me which ROM u r tying to flash.
And how.
Plz be detailed in step by step manner.
i try to flash gene_wm6.1_19581fix2_WWE by starting ROMUpdateUtility.exe
try gene_wm61_wwe same prob.
rex4u said:
Ok bro'
Lets go step by step.
Tell me which ROM u r tying to flash.
And how.
Plz be detailed in step by step manner.
Click to expand...
Click to collapse
Hi,
I'm trying to update my phone from last 1 week but god no luck
1st Method I Try:
If I use JumpSPL.exe put 0x10000000 with 1.10-Olipro.nb , I use Power & Camera Buttons, it gets "Not Connected" in ActiveSync and then while I'm holding it, after a couple of sconds, it gets Connected in ActiveSync, I then release Camera and Power, Use ROMUpdateUtility.exe Agree to everything, It gets stared, on 2% of Update, gives me this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2nd Method I've Tried
Normally connected the phone through cable, did a Sync and ran ROMUpdateUtility.exe, It boots up with tricolor screen, gets to 2% and gives same message as in image.
I have 5 Images downloaded from this site, how can all be bad if users are able to upgrade their OS
Please Help.
A DETAILED, step by step method to update it would be Highly Appreciated.
Please Give Timings to Hold/Unhold buttons or Screenshots to explain more....
Thanx
Though not udpated to WM6.1, I've created "How To" for upgrading WM5 to WM6. Get it from here, hope this will help.
Brothers, your SPLs have not got patched that's why u r facing this problem.Try this
http://forum.xda-developers.com/attachment.php?attachmentid=67187&d=1201181109
Just copy this in your phone and run it.It will automatically flash your SPL and reboot.On reboot you should now see SPL as 1.10OLip.Now u can flash any ROM to your device.
If still some problem you are welcome to ask.
Hope this helps..
gene stuck can be resolved
polifon said:
After this : http://forum.xda-developers.com/showpost.php?p=1847381&postcount=37 phone is not power on , only tri color :
onbl: 1.07.0000
spl: 1.10.olip
Please its urgent.
Click to expand...
Click to collapse
There you go buddy
http://forum.xda-developers.com/showthread.php?t=375064
bryangopan said:
There you go buddy
http://forum.xda-developers.com/showthread.php?t=375064
Click to expand...
Click to collapse
I hawe tryed this solution bro but its not help
hey i am also having same problem as polifon....tried everything ...the gene is stuck in tricolor screen....not able to load any new rom ...neither the original one is loading....no response from the phone...when i press soft-reset and camera button together i see the tricolor screen and nothing else....
Need Help.....
I think i have bricked the phone...
hi all
two weak age i update my atom exec with one of xda-dev roms and after finish upgrading my device just show me o2 logo and after that ... black screen !
what i must do until my device get back?
one of my friends tell me my device is not break just need to upgrade it again with another rom ! i do this work but my device dont connect to activesync
at now what can i do ? plz help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
good luck my friend (sina)
XFACTOR said:
hi all
two weak age i update my atom exec with one of xda-dev roms and after finish upgrading my device just show me o2 logo and after that the black screen !
what i must do until my device get back?
one of my friends tell me my device is not break just need to upgrade it again with another rom ! i do this work but my device dont connect to activesync
at now what can i do ? plz help me
good luck my friend (sina)
Click to expand...
Click to collapse
This is normal experience for newbies. hehe... Maybe what you can do is, hard reset your device 1st and try to connect your USB again. If on your Exec screen shown USB Connected then there should be no problem although on your PC's shown "not connected". Just proceed to do the upgrading once again with another ROM. Hopefully this explaination can help you
hi my friends
i do ur RECIPE ! i download five different rom but i dont have any successfulllll
at now what must i do ?
Go here I have explained the procedure in post#28 and follow it:-
http://forum.xda-developers.com/showthread.php?t=410852&page=3
Afterwards load the latest ROM from jaime here:
http://forum.xda-developers.com/showthread.php?t=421349
hi my dear friend
in that instruction the Xda-Atom-Exec-ENG-20060614_R060428N_EX0028.exe link is not working!
i must download wich one of another rom? ?
best regard for u!
sina
Go to Atom Wiki and download this original O2 ROM "Xda-Atom-Exec-ENG-20060721-MOT0822.exe", it works fine and I use it for my Atom Exec.
tanx my friend !
at now i go to do ur instruction!
hi my friend tjkhattak61 !
i do ur procedure but in second step nothing happend!
1. Copy eboot.nb0 (from Atom original O2 ROM) on miniSD in root directory.
2. Insert miniSD in Atom Exec, enter in bootloader (Camera+Soft Reset) and then wait for the process to complete. After completion ur Atom will automatically reboot.
in first line of boot loader screen is right MN2 Bootloader !! but i use the MN1 ???
maybe this problem proper to THis FILe mn1 eboot?
XFACTOR, if u have followed the procedure the bootloader has to change to MN1 as it is necessary to go back to MN1 for the problem to be solved. Please try again as the same procedure I used for 100 of times on my Atom Exec when it is bricked or the Extended ROM is corrupted. Eboot.nb0 that I have posted there on the forum has to be used and insert the Mini SD card and press camera Button alongwith reset button with stylus, this step is tricky as both have to be pressed together. If this does not do the trick then follow another procedure, remove battery for 1 Minute, place the Mini SD card in the slot then while holding camera button and reset button enter the battery. U will enter the bootloader mode which is in DOS like window and it will automatically pickup the eboot.nbo and will start the procedure of downloading from SD card. Yes one thing more the Mini SD card has to be 512 MB otherwise this procedure will not work.
oh no its mean i must buy another mini sd card ?
i use 2GB mini sd ! are u sure if i do this procedure with 512 mini sd my problem solve ?
because i use ur procedure again and dont have any result!
.
.
.
damn i go to buy 512 mini sd!
nonce bye
GOD HELP ME i WANT MY PHONE
.
.
.
Yep u need a 512 MB Sd card to make ur Atom Exec alive again .
XFACTOR said:
oh no its mean i must buy another mini sd card ?
i use 2GB mini sd ! are u u sure if i do this procedure with 512 mini sd my problem solve ?
because i use ur procedure again and dont have any result!
.
.
.
sheet i go to buy 512 mini sd!
nonce bye
Click to expand...
Click to collapse
I also use 2GB mini SD but thanks God I didn't face the same problem like this
Hi @all.
IS there any Linux or Android distro (ROM) for AtomLIFE ?
Greetings.
many times this has been asked..
seems no one is interested.
I have an atom life too...
but sadly, it is now being replaced by a new G1.
1gb storage embedded, 624MHz processor..
i too hoped there'd be a port of android for the atom life..
but alas, I'd waited too long...
hope my reply gives u the answer u are looking for.
as i wrote in this thread russians already made it...
and now they are working on functions...
some preview
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
its on HP rw6815 but its almost the same as Atom
it´s cool isn´t it? :-D
That's so cool......I hope it could be worked on the Atom exec..
any video file can prove it ?
go to pda2u.ru and you can try it on your own...
i had some troubles with formatting sd to ext2 (i dont have linux and vista is very stupid for this...) but i am gonna try it again when there be some time
btw i think it will work on atom - it has same hw like hp but its still beta and a bit complicated (and forums are in azbuka :-D )
wow, this is going to be awsome. i hope it will be working better than tf3d on atom exec.
cool..but not work properly!!
Hi guys,I've try to port android on my hprw6828...works,but not properly...maybe cause a not specific driver,but this project is very cool...I hope soon to have Androids on pda
and plzzzzz......................i realy want my o2 xda atom runing android in it....cz im getting bored with touchflo 2d,now im using the omnia widget screen,quite bored cz i cant update any widget in it...now i think i am going to the google android..with its cool looks and funstions....
p/s: sory for the bas english...
there is still lots of work to do, but if there were some developers, they could help them make it work good faster....
i am looking foward to this......
and getting exited....cant wait for this...
I want to use Linux on my 6815.
But I read a lot of thread about this. I couldnt understad.
kosmodisk said:
there is still lots of work to do, but if there were some developers, they could help them make it work good faster....
Click to expand...
Click to collapse
hope it will realize soon, i dreaming using ubuntu mobile on my 6828
i´ve tried to translate the post from pda2u.ru forum so you can try on your own risk!
its for hp6815/6828
so
1.download AndroidOnP535.rar form this link
2.Format your SD to ext2 format and extract rootfs.tar.gz (its in AndroidOnP535.rar)
3.Rest of files in AndroidOnP535.rar copy to the root of your device (except zimage)
4.Download zimage from here and copy it also in root
5.insert sdcard with extracted rootfs.tar.gz and run haret-0.5.2.exe
so if your are luckier than me, you have beta working i´ve had some problems with formatting, i don´t have linux but i think that using linux there shouldn´t be any problem
one more time - YOU DO IT ON YOUR OWN RISK
@kosmodisk
thanks for translate and simplfy it for us. google kind of confusing. looking at the step, i just relize that you don't actually flash your rom, is that correct? so i assume it is safe for the rom?
yes it boots from your miniSD after you run haret-0.5.2.exe from you file explorer... (after booting simply do softreset)
i´ve done it many times but as i said, it is better to extract *.gz archive using linux - my problem was that when booting - everything gone well, it also recognized my SD but it could not initialize anroid.sh file
maybe the reason is that i have kingston card for testing this - and as we know this brand has problem with booting (f.e. updating rom)
maybe you´ll be luckier (i´ll try it again later but final exam is quite soon )
kosmodisk said:
i´ve tried to translate the post from pda2u.ru forum so you can try on your own risk!
its for hp6815/6828
so
1.download AndroidOnP535.rar form this link
2.Format your SD to ext2 format and extract rootfs.tar.gz (its in AndroidOnP535.rar)
3.Rest of files in AndroidOnP535.rar copy to the root of your device (except zimage)
4.Download zimage from here and copy it also in root
5.insert sdcard with extracted rootfs.tar.gz and run haret-0.5.2.exe
so if your are luckier than me, you have beta working i´ve had some problems with formatting, i don´t have linux but i think that using linux there shouldn´t be any problem
one more time - YOU DO IT ON YOUR OWN RISK
Click to expand...
Click to collapse
will try it, maybe u can use gparted to do it
if you use partitioned sdcard you might have to change startup.txt
like this:
set CMDLINE "debug rootdelay=3 root=/dev/mmcblk0 init=/android.sh mem=64M"
to:
set CMDLINE "debug rootdelay=3 root=/dev/mmcblk0p1 init=/android.sh mem=64M"
i did it first with partitioned sd using partition manager, but haret didn´t recognize it...
wow.... its going on.... nice! Any new news yet...?
Android on Atom Exec
Dham it works, well actually it boots!!. I tried it with 02 atom exec. i did have to change the startup.txt to "mmcblk0p1" thing.
there were no networks, almost every apps crash, the screen kind of off to the right. touch screen works, i can slide to change the today, the louncher works. real cool.
@ariey
maybe you need to use ubuntu and extracted as root. thats what I did. when your not as root, extracting the rootfs.tar.gz gives error.
heres how, got it from the www
=======================================
How to browse files/folders as root user in Nautilus
* To install File Browser (Root)
gksudo gedit /usr/share/applications/Nautilus-root.desktop
*
o Insert the following lines into the new file
[Desktop Entry]
Name=File Browser (Root)
Comment=Browse the filesystem with the file manager
Exec=gksudo "nautilus --browser %U"
Icon=file-manager
Terminal=false
Type=Application
Categories=Application;System;
==========
Now do:
$ killall gnome-panel
wait until the gnome panel resets, then go to the Applications|Systems
Tools menu and you will find an icon & item marked
'File Browser (Root)'
click & it will issue the gksudo nautilus command for you.
Just remember to be careful what you do with it...
========================
i use this rom
http://rapidshare.com/files/4297231...57.502.1_6275_1.48.00.00_108-ATT-MR3_Ship.exe
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i got this error 262
i am new user ... and its my fst time to update any PDA set so if possible then i need some info step my step thanks to all
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Make sure you are using either USPL or HSPL as well
already soft rest the set and do again try but same problem again and again
now my set in boot mode and show these words
HERM100
IPL-1.03
HERM100
SPL-1.40.01ipeo
need full info about this problem step my step
Try saving the nbh to you're storage card as herming.nbh and flash the stock rom this way... then try updating you're rom again.
Fallen Spartan said:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Make sure you are using either USPL or HSPL as well
Click to expand...
Click to collapse
joshkoss said:
Try saving the nbh to you're storage card as herming.nbh and flash the stock rom this way... then try updating you're rom again.
Click to expand...
Click to collapse
thanks for replay if u gave me step by step info then its better for me
i read something here about NBH file
http://wiki.xda-developers.com/index.php?pagename=Hermes_PreproductionVersions
so where is the NBH file if someone have then share here the link
I wish you guys would do a little reading...
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
If yours is just an exe file then use winrar to extract the 2 files.
You also need to have Hard SPL V7 installed, if you dont then go to last paragragh......
1. Format a 2Gb or less sd card FAT32. Copy .nbh file to it.
2. Rename to hermimg.nbh. Insert into Hermes.
3. Reboot into bootloader/tri-colour screen.
If you have done everything right, follow onscreen instructions. If not then go through again, step by step.
If this doesn't work, drop kick your Hermes into next year cos it isn't gonna be fixed without a LOT of reading and I quit here....
ultramag69 said:
I wish you guys would do a little reading...
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
If yours is just an exe file then use winrar to extract the 2 files.
You also need to have Hard SPL V7 installed, if you dont then go to last paragragh......
1. Format a 2Gb or less sd card FAT32. Copy .nbh file to it.
2. Rename to hermimg.nbh. Insert into Hermes.
3. Reboot into bootloader/tri-colour screen.
If you have done everything right, follow onscreen instructions. If not then go through again, step by step.
If this doesn't work, drop kick your Hermes into next year cos it isn't gonna be fixed without a LOT of reading and I quit here....
Click to expand...
Click to collapse
thanks for replay where is the nbh file where i get it
ultramag69 said:
The flash file consists of 2 files, the RUU_Wrapper.exe and the RUU_signed.NBH file.
Click to expand...
Click to collapse
Read the posts.....