Its a stupid little problem. As of yesterday my track ball wont go to the right (or down) properly. If you're on the homescreens and gently go to the left its fine but not to the right. If you flick it really hard to the right it sometimes works. Its not the end of the world cos I dont use it that much but its essential for games such as xgalaga etc. I'm hoping its not broken hardware as I'm not sure i'm covered by warranty as its an Orange upgrade I got off ebay.
Anyone else had this problem and managed to fix it
abuodh said:
Its a stupid little problem. As of yesterday my track ball wont go to the right (or down) properly. If you're on the homescreens and gently go to the left its fine but not to the right. If you flick it really hard to the right it sometimes works. Its not the end of the world cos I dont use it that much but its essential for games such as xgalaga etc. I'm hoping its not broken hardware as I'm not sure i'm covered by warranty as its an Orange upgrade I got off ebay.
Anyone else had this problem and managed to fix it
Click to expand...
Click to collapse
Hi !
I had the SAME problem a week ago.. couldn't scroll to the right anymore... I tried to clean it, rub it aginst something etc... nothing worked..; then I tried an easy solution: shut the phone off and then restart it .. result: Problem solved So just turn your device off and turn it back on... worked for me
http://forum.xda-developers.com/showthread.php?t=581445
http://forum.xda-developers.com/showthread.php?t=546206
Related
I have a T-Mobile Pocket Phone Edition,
It's had a rough life but as kept going for over 3 years now.
For the last year I would have to realign the screen 2 or 3
times a week but over the last few months it keeps getting worse.
Sometimes the screen won't respond to anything anywhere,
then after I tap it a few times boom works fine.
Sometimes I'll tap on the “Ok” and the “Start menu” will activate.
Sometimes drawing a line up the center of the screen will end up
shooting all over the screen.
And sometime it will work perfectly!
I thought the problems were to erratic to be hardware so
I hard set after awhile it started again,
So I hard set and installed a different ROM after a coupe hours
the problem was back.
Also sometimes the align program will get stuck in a
loop that doesn't end.
I've searched but can't find an answer? Anyone have an idea?
I've already taken it a part once but couldn't see how to get
any further after I toke the back panel off? Please help!
WOW nobody? So no one was heard of this problem before?
Can anyone direct me to directions on taking apart the Wallaby?
Thanks <><
It's a problem with touch screen. You should check (and fix) it.
Maybe it is necessary to press well screen to the motherboard. (Sorry my english).
Ok, Can you tell me where that connection is?
Thanks
Toke everything apart, found the connection, cleaned everything (w/ screen wipe)
put it all back together. Still have the touch problem and now the backlight won't work!
I've found if I press the unit in my hand the touch panel works right,
I don't think it's a lose connection to the main board so I think it must be
one on the main board.
If anybody thinks they want it for parts let me know! :?
Hey guys!
something happaned to me 2 days ago.
everything worked great, and suddenly the HD screen wont work properly.
the left side of the screen sometimes reacts defferent when i press the left side screen.
for example - i press the Start on the left, and it reacts on the right!, if i press the right side it works good!
ive done few HR with changing the ROM few times too, the problem is still there...
when i do screen align - the buttons are getting pressed ok, when i start to use the phone its getting crazy, i have to press the left side at the end of the screen so it can react on the middle...
im getting crazy cuz everything worked great 2 days ago...
the picture on the screen is perfect - no defects except the touch.
also when i press the left side of the screen' lets say on the TF3D Tabs and living the Stylus on one Tab, its shaking a bit like im playing with it...
all the 4 HARD BUTTONS at the buttom doesnt work properly either...
thank you all...
BTW something happaned to alot of people? i can see alot of messages about those things..
* also one more thing..
im using my phone as a Modem for 4 months already, can it be one of the resons to make the Digitizer go crazy? the heat? cuz its get hot as modem...
Hey.
thanks for the answer.
but my qustion is if it really is my Digitizer...?
yes i got the same problem, send it to my reseller and got it repaired.
In a few hours i go to the poststation and get my HD back
greetz
yeah my seller lives at the other side of the country lol...
thanks guys for the help.
=]
OK
something doesnt make any sense!
ive done another HR- another ALIGN SCREEN' and suddnley the screen works perfect! no stuttering, no jumping from one tub to another!
how can that be???
ive pressed the screen hard enough to see if the problem comes back! and it didnt...
how can that make any sense?
Damaged Digitizer will do that?
Hey!
thanks for the answer, but i live far away...in Israel \=
the main problem i have on the screen, is the OILY LIQUID under the screen! that what causes the problems, now my HD wont work at all, or maybe sometimes when it wants to...
now i have to send it for repair...and hope it will be ok
I'm out of luck,
One year ago, in the beginning of August, I had the Digitizer problem...
After a year passed, I begun to noticed again a small oil liquid on the LCD!!!
I still don't notice any problem with the touch, but it's a matter of time...
I can't believe it!!! 99% for sure that I have to send my phone to repair again and almost exactly one year after the same problem!!!
I know there are hundreds of threads and articles posted about HD2s freezing with the lock screen but this issue seems different to me. My problem is that whenever I lock the phone the touch screen will freeze entirely. I thought a work around may be to install a different lock screen. After installing that I can get past the lock screen but the touch screen still is not responsive. I have no idea what to do. I already did a hard reset and it still does it. I would like to add that it is completely consistent. It happens every time without fail. In order to even use the phone I have to pull the battery and I get one use out of it before it locks and I have to pull the battery again. Does anyone have any suggestions? I would really appreciate it..
Update: I flashed the original ROM to my phone and the freezing problem still exists.. I have no idea what to do at this point.
Update 2: Narrowed down the problem to being the physical "power/end/lock" button. If I slightly press it but not fully it will go to the honeycomb style menu with all the apps. If I press it fully the screen will go out like normal but then if I restore it, the entire screen is locked up. Nothing will work after that until I pull the battery.
I've directly linked the issue with the power button. I dont know why all of a sudden the power button would have a different function. The work around I found is while the phone is locked and the screen is off I can press the green button to unlock the phone and the touch screen will then function. If I use the power button it will remain frozen. Any ideas what happened?
Hello,
I got some bad news for you, this issue is actually related to the digitizer (hardware) not software. What i would recommend is called HTC for a repair and send it in, it is covered by warranty, hopefully you have warranty.
A lot of people are having this issue, no-one yet has been able to pinpoint the cause, but here is the link a thread with similar problem:
http://forum.xda-developers.com/showthread.php?t=854165
Luckych
Thanks for the reply. I do not think I have a warranty on this phone considering I bought it privately. Ill talk to Tmo and HTC and see what I can do. Just a theory, I may be wrong. But I live in PA and its been getting below 20 here lately. I noticed today that my work around didnt work when I was outside working on my car. Then I went inside and used a blow dryer to heat up the phone and it started working again. The end button didn't function properly but I could unlock the phone with the green send button. Perhaps the cold weather is shorting out people's digitizers? I don't really know how they work so that's why i said its only a theory. I bought this phone in the spring and didnt have an issue until now when it started getting really cold.
Hi to everyone in this forum. I've recently received as a present a new toshiba folio 100, but, since I'm experiencing an annoying menu button flashing, I've thought of it as a software problem so I upgraded the folio using the foliomod1.3c and applied the rotate patch and also the 1.3c fix patch. The menu still flash with no apparent logic. I've tried to kill all applications running and it's still there. It seem to come up and down at random. I ask to all in this forum: do you believe it's a hardware issue or is a software issue? Because if it's a hardware issue I'm going to try to have a new folio from toshiba. I'm overall very pleased with the work that Dexter made to make the folio an usable machine but this flashing is driving me crazy. I use the folio basically as a portable scientific pdf reader so I need to concentrate on what I read and this flashing is really annoying. I would like very much to thank you all in this forum in advance for all the suggestion/help you could provide.
use my "foliobuttons" app
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I have a request that serve All those who suffer MENU crazy button .
Is it possible to prepare application you can setting ON/OFF the MENU button
Most of the time useless button.
sometimes button jump after 10 minutes, sometimes after an hour
Usually I fix the problem by changing the settings with FolioButtons 1.1.
If you could add to FolioButtons on/off operation for menu Buttons was the best.
Hi teknoraver,
Can you add enabled/disabled menu button in foliobuttons application ?
flashing on...
teknoraver said:
use my "foliobuttons" app
Click to expand...
Click to collapse
I am pretty desperate about this issue, because none of the methods seem to help...
Right now the buttons work opposite- Menu button flashes mad and none of the other 3 responds...dont know how it happened
Just a thought- while the folio is booting up the menu button ALREADY flashes! I have zero understanding in there but isn't it a process that loads / starts early in the line?
I appreciate everyone's effort trying to solve this bug as it makes this handy tool a useless pile of crap.
I was wondering how many folio users are suffering of this crazy buttons madness.
Mine was crazy from the very beginning; I sent it back for repair and toshiba only did a firmware restore... Nothing changed at all!
It makes my folio almost unusable!
bye bye crazy buttons
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
I think it's a hardware issue and even a build quality issue.
If i hold my folio at the side of the buttons, i get the flashing buttons problem (even the foliobuttons app will not help), if i hold it at the other side, i've got no problems at all.
Do you have an animated background? Because I saw that some people had this issue with an animated background...
Hi Mshr73, nice first post indeed
Could you post some pictures of what you did?
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
seems to get better...
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
vietnamibalzsam said:
I really don’t want to be too quick on this, but Dexter’s 1.4 seems to bring relief to this issue - for 2 days I have been running this mod the menu button stopped flashing!!
Any similar impressions on this?
Click to expand...
Click to collapse
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
I just tested without thickness under the screen, with foliomod 1.4 and after a few hours I again the problem of crazy buttons.
Mshr73 said:
After two weeks of testing and a complete breakdown of my folio100, I finally find the problem or just crazy buttons and freezing of the screen.
I drag a thickness in the screen in the bottom right corner of the screen to isolate the audio connector and it works better than a miracle again.
The only downside is that the screen comes out slightly from the slot but nothing really bad.
The thickness I put slightly too big or-1.4 mm I'll Demount next week to put a finer and I'll try to take pictures in passing.
Note however that the loss of waranty is innevitable.
Sorry for my bad english ;-)
Click to expand...
Click to collapse
Well, I just finished dismantling e reassembling my Folio. Following your hint, I cut a piece of paper and put it between the audio connector and the back of the screen (yes, it was metal vs metal). I'll see whether it's gonna work or not. Crossing fingers for now.
Not that I'm so confident in leaving a piece of paper stuck right where the DC input is .
BTW, did you try with a smaller thickness? Even if this is the problem, I'm wondering whether a piece of paper would be enough or not.
thyself can someone. post pictures of before and after details?
we will be much appreciated
i didn't have the crazy buttons issue this far in 2 weeks, just my home butten needs to be pressed harder. I'm pretty sure it's hardware related, i read often that users experience it when changing from an warm room to a colder one, or in regions where its verry humid(some circuit closes maybe...). so Mshr73 is on the right way as far as i can tell.
Dexter's 1.4
^Sbk79^ said:
No way pal, I guess I'm in the opposite situation. It still happens to me, and sometimes I think it even got worse... well, I can always look at crazy keys as a "special feature" that no other tablet will have!!!
Click to expand...
Click to collapse
Really sorry mate, I hope it will solved this for others too...
Anyhow, it is so disturbing, that I was already considering to send the tablet back to Toshiba...
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Mshr73 said:
I'll try to do this weekend if I do not have too many customers. I post the result Monday.
Click to expand...
Click to collapse
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
^Sbk79^ said:
I'm looking forward to your pictures, too... because my trial simply didn't work.
I tried with both a single piece of paper and then with 2 pieces wrapped in tape. I put these spacers between the back of the display and DC/audio connector.
In both cases, the crazy keys phenomenon started to happen after 15-20 minutes of usage.
In most cases, it starts to show when I unlock the device. As soon as I unlock it, home and menu buttons light up with no apparent reason and go crazy for 10-30 seconds.
Then, I even tried to loosen just a little the screws (I read, somewhere in the forum, of a guy who said that he solved his crazy keys and screen lag problems this way). I mean, all screws are now locked but not too tight. Well, I have to say that I don't have any screen lag anymore (I even removed the piece of paper, from the battery area, which used to solve the issue before) but crazy keys still happen. I'm going slightly mad
Click to expand...
Click to collapse
Well ... with a piece of paper the problem Come back.
I handed a piece of cardboard and the problem disappears.
I think that to raise the screen to solve them but I'm still not 100% sure.
Hi all
Sorry for a newbie question.
I have a Sony Z Ultra which I really like, but recently the screen sometimes just starts rolling for no reason. I cannot read anything, and it often does not stop. I turn the screen off, then on, and it often doesn't show anything but then it does it is still rolling. I have to hard reset, and even then have to do that a few times before it starts up normally. It seems to be happening more frequently. Any ideas on what I can do?
Thanks so much
Craig
csumm said:
Hi all
Sorry for a newbie question.
I have a Sony Z Ultra which I really like, but recently the screen sometimes just starts rolling for no reason. I cannot read anything, and it often does not stop. I turn the screen off, then on, and it often doesn't show anything but then it does it is still rolling. I have to hard reset, and even then have to do that a few times before it starts up normally. It seems to be happening more frequently. Any ideas on what I can do?
Thanks so much
Craig
Click to expand...
Click to collapse
Rolling back? Screenshot
?
RealityFails said:
Rolling back? Screenshot
?
Click to expand...
Click to collapse
It is more like rolling upwards, like an old tv that is not tuned to the channel properly (I am showing my age here because I still remember that)
I cannot take a screenshot because everything on the screen rolls, so cannot access the screenshot function or anything else for that matter.
I have found that when it happens I bend the phone backwards a little and it stops. This makes me think that perhaps the case may be slightly bent from a drop or from having it in my pocket which is somehow causing the problem.
It is not doing it now; I hope it won't return
csumm said:
It is more like rolling upwards, like an old tv that is not tuned to the channel properly (I am showing my age here because Is till remember that)
I cannot take a screenshot because everything on the screen rolls, so cannot access the screenshot function or anything else for that matter.
I have found that when it happens I bend the phone backwards a little and it stops. This makes me think that perhaps the case may be slightly bent from a drop or from having it in my pocket which is somehow causing the problem.
It is not doing it bow; I hope it won't return
Click to expand...
Click to collapse
From what you describe it sounds like your flex cable is causing the issue.
If that's the case, I could be wrong you can take it apart or return it to Sony. I'd just buy a new one. Sounds like a flex cable issue to me
A final development in the story of my phone. The rolling came back, got worse, and then I had times where I would push the power button to light up the screen out of power-saving screen off mode, and nothing would happen. The back-light would light up, but just a blank, black screen...
I sent it to the repair center and the quote came back. It would need a whole new screen.
The cost was going to be pretty high, so I looked online and bought a whole new phone for only 60 cents more than the repair quote!
I just hope my new phone lasts longer than the old one