my ppc was have a problem in boot loader and i fix it and i but on it win 6.1 and i found it to heavy on phone i decided to get the win 5 back when i get it setup it complated with no problems then no bower on and no even handly boot loader what can i do to make boot up agin ?
You will definitely get better response by asking this on Gene Q&A thread.
Related
hi guys
I have a bricked hermes
DOPOD 8525 -> WM 6.1 Professional
From bootloader screen
HERM100 IPL-1.01
bootloader SPL-1,40.01ipro
Tried to flash ROM using safe SSPL with RUUwrapper.
At completion of flash both my mobiler & win mobile device centre disconected or lost connection with device, after soft reset will only load up to second HTC screen. How can I recover from this brick? device manager recognises HTC usb sync when plugged in but I can't connect to re flash rom.
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Thank you Zocster
Got it unbricked & working, thanks to you I have a lot of trouble reading as I am leagally blind but get by with T2V & magnifiers most times. however searching threads is a lot harder than for most.
thanks
Lou
PS if you ever cross the tasman drop me a line
loulian, to make it easier to recover from bricks, It would be best if you flashed Hard SPL V7 from here - http://forum.xda-developers.com/showthread.php?t=296722
It won't guarantee a flawless flash but will help if something goes wrong by giving you a GOOD chance of recovery.
You can then use the sd card method and make life easier by not having to worry about pc crashes, cables being pulled, blackouts or those annoying "sync" errros.
Cheers...
Also if you have trouble setting up your Hermes after a flash/hard reset because of the alignment points being hard to see, It would be a good idea to download this -
http://www.codefactory.es/en/downloads.asp?id=44
It will, after you save the settings, allow you to use your PC to set up the Alignment point if you need to Hard Reset or flash your phone making it load the os to the today screen.
zocster said:
Reading helps my friend
Get to bootloader, press ok and power on left and right respectively and stick stylus in all at same time.
that should bring up tricolour screen.
Download your imate jasjam official ROM
EDIT i think you got a dopod so the dopod ROM is what you want from my 4shared or wiki!!
from the wiki or from my 4shared, and flash it while it is in boot loader mode.
then you need to flash hard spl one of the first stickys on this thread that you have just posted to.
Then flash your desired rom.
Click to expand...
Click to collapse
Sorry to ask a stupid question. I have the same problem, but when i try to flush it from a TriColor mode i get a communication error, it complains about activesynch not connected. BTY mine is cingular 8525 so i am trying to use one of the cingular roms.
hi all good ppl develpoers there
i really need ur expertise here
i have htc monet(virgin lobster) and i acceidently delete every thing all windows from my phone and now its not turnning on
but its comes on on boot loader and saying that
monet ipl 1.0
monet spl 1.0
monet
in three colors screen
so is there any roms or any way i can recover my phone
please help!!
thanks in advance
thanks a lot
I have this same problem....
I had a similar problem, it was a faulty camera button
That is to say?
When you connect the phone via USB to computer, does it show the word "USB" somewhere on the phone's bootloader screen? if so you still stand a chance to recover it through flashing another ROM as the computer still recognizes ur bootloader. If it doesn't show "USB" but instead "SERIAL", then your phones isnt recognized by the computer and tht significantly reduces the chances of device resusitation.
You will need a ROM dump from someone else's 700TV to reflash it to WM5. Problem is no one seems to own a 700tv these days, and my monet now runs wm6.1 (Chinese ROM).
I have HT7 Phone it bricks during upgrading the SPL because it had WM5 and I went to install WM6
I can boot the Phone in Recovery Mode ( Holding the Camera Button and Boot ). Three Color Screen and I can communicate with the phone through the MTTY but during installing the Update it says ERROR 300
is there anyway to get the phone alive again ?
Thanks for your Help
** I have Kaiser and it's not mine , it was belong to my friend and I damaged his phone
PS : Phone is out of warranty and there is no service center here , also I can't use the JTAG Method
jafer mainly error 300 comes in when you are using wrong rom update utility... atleast in my case...after running spl pgm from phone and mtty program make sure you run the rom update utility inside the spl folder before running the rom update utility inside the rom folder... hope this helps.. and make sure that the rom is for old gene...
which spl its nowing at the tricolor screen now... oref or olipro?
which spl its showing at the tricolor screen now... oref or olipro?
ONBL 1.10.0000
SPL 1.07.oref
Thank you
Could you please explain more , where to get those files
I got Unbricker from here
http://forum.xda-developers.com/showpost.php?p=2784291&postcount=66
Thank you again
Question : when TriColor Launched can I re-flash the original firmware ? i don't know what to do now
Please look at the stickey, krazy has made quite a good tutorial about flashing etc and has all the tools hyperlinked. LoL
Hi Thanks but please don't refer me to reads topics , because i've already read all of them
The Phone is HT7 , during the upgrade it bricks , I used the " Orefkov " but it seems it only works for new Phones
Anyway by no I can Boot the Phone in Tri Color Mode but when i try to upgrade a rom it says ERORR 300
is there any way to BOOT the Phone through the SD Card ? I already had the same issue with another phone , I boot the phone with SDCard and it became alive again !!
But I don't know the Instructions for this GENO Crappy Phone
try removing the SD card and update the ROM. BTW as far as i know oref Is for new Gene. post a query on the right thread and ankit or krazy or any proficient member will definitely help you out. or you may pm basha for help.
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
superlifer said:
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
Click to expand...
Click to collapse
Hi there,
You have answered your own question. you up graded to spl1.2 and then flashed with an spl3.5 rom. you should have flashed an spl 1.2 rom. To use an spl 3.5 rom you need to upgrade again with AP4.0 rom that has the upgrade built in. there is no other way of doing it.
Now you will have to fix your athena with THIS HELPread from post 33onwards, and please read the athena WIKI.
Best of luck
Jay
Hello Jay,
Thanks for your quick reply. How do I get the Athena connected to my PC now ? I can't connect it through Activesync as it does not boot and is in white screen. Also I tried to put it in boot loader mode and then run the updater.exe but it displays a 'Timeout message ' whether the device is coonected and that Active sync is running ?
Can I install 1.2 ROM if that's possible ? If yes , can you let me know which ROM with SPL 1.2 ver can work ? I am just worried now as my Athena may be completely dead and I can't use it.
Can you help ? Thanks once again.
Hi Jay , Folks,
I am writing the codes that I see when I put Athena in bootloader mode :
[email protected])
IPL-v1.00
[email protected]$)
SPL-v1.20.Olipro
From this info , can it be fixed ? Please help
Thanks
Hi superlifer
welcome to the joys of flashing!
Jay has given you a solution to your problem.
Guess what!
You are not the first person to make the mistake you have made and it is documented in several places.
Jay pointed you to the specific post that will fix your problem but he also mentioned you should read the wiki.
i will add to this that you should also read the sticky threads at the top of this forum which include "the beginners guide to upgrading the ROM"
and another thread titled "How to FIX INVALID MODEL ID after bad flashing"
You have corrupted the radio by trying to flash an SPL3.5 ROM onto a phone formatted for SPL1.2.
These roms are different sizes and it wont fit, leading to the unintended consequence.
As I said in the beginners guide , you can flash from bootloader(the 3 coloured screen"
I hope all new owners read this thread and the others I mentioned as it will help prevent the angst you are feeling.
regards lakeman
Hello Jay, Lakeman, Cmonex,
Absolutely brilliant !!
My Athena is breathing again and is out of the dead white screen. I followed the steps to fix the model id and wifi (from CMonex ) and was able to overwrite the model id successfully. I then flashed it with ROM WM6.1 MULTILANG R6.1 MiChY which also got installed successfully. On bootloader screen it now shows as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
Many thanks first of all to you all and your timely reponses and perfect guidance.
I just want to know now which is the best stable SPL1.2 ROM now which i can install. I want to install 1.2 ROM with HTC Plugin and the big Digital clock and also which will have GPS. My previous ROM had QuickGPS which doesn't seem to be there now and is there way I could get it back. How can I use GPS on Athena.
Apologies as this device is completely new to me i am still getting used to its functions by reading lot of articles and WIKI for this model.
I am scared to put SPL3.5 as I might break something again. My donation is on its way.
Cheers
Just update to the 3.5 spl much much easier that way instead of waiting for anyone to backport their stuff to the 1.2 spl
http://forum.xda-developers.com/showthread.php?p=3909674#post3909674
HERMES (htc tytn) UPGRADE FAILURE
REPORT
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
i GUESS YOUR BATT IS ALMOST DEAD!
Hi dude... does your batt is higher than 50%? the process will not continue if yuour device is under 50% maybe it is beacause you cant charge it in Bootloader. keep it higher than that... if not the case... i guess you will ned to clean it with mtty....
Just search something like that... im for sure there is a way to make it... use the stripped att rom
AND TRY WITH IT ALWAYS!!!
never but never! when you got a problem in upgrade NEVER do a hardreset.... just softreset... keep it on mind... try an XP machine get it wherever you need to get it!
thanks
..a lot for the reply!
i tried on a XP-PC, because mtty don't work in Vista (Ultimate x64)
i followed ALL the instructions..BUT..
..the problem persists!(
thanks for the idea of battery i will try again, with full of..
also, i will try some ROM's without radio's..hope that help..
BTW:
in mtty shows that the device is CID locked with:
"ORANG008"
i downloaded the last ROM for Orange 008, and tried of install...BUT..nothing!(
any other sugestion, please?
thanks again!