hi.i have tryed to run spl-1.16 in my touch dual i run it in my device and stuck in 95persent.from there my mobile start three colour screen nothing done and whriting niki 100 spl-1.16.0000 cpld-4.can somebody help me?
Related
hi
where can i get italian rom for htc 7500?
pda was in italian language,tryed to flash with wwe but it disconected in the middle of flashing,now it shows "htc" on white screen,m oa,g o2...,after 2 seconds 2 more-r 1.38.00.00 and g 32.71.7020.12h-after 2 more seconds all small letters gone and stays on "htc" on white screen forever,untill soft reset,the power button dont work,vol down and reset goes 3 color disp.
tryed all the roms on ftp,got "inv vender id" with all of them,tryed many times,even with pof's athenaspl its 'inv vender".
tnx for help
Hi,
i have the same thing.
The only thing is waiting for a release of your spanish rom.
Or wait for someone who could unlock cid, and flash with a rom.
will ask imei-check
It costs 30£ for unlock more 15£ for return shipment.
so they cant unlock it
in mtty info 2:HTCSHTC__405 €¾VHTCE
which cid is it?
tnx
when you connect your phone does it recognize with activesync ?
hi i had shaps wm6 installed , and then tried to upgrade my radio , it went to 2 % then came back with a error messege , my phone is now stuck in bootloader , any fixes?
in bootloader it says herm300
IPL-1.04
SPL-2.10.0ipro
solved it useing hard flash , thanks !
flashed phone with the lasest unlocker software , but now all i get is the htc smart mobility splash screen ?
mda herm300 it only shows t-mobile screen
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
Have you tried:
- Hard Reset
- Reflashing
- Rerunning the unlocker
- Mtty task 28
digiview said:
got a mda herm300 it only shows t-mobile screen when power on (someone has unlock wrongly)
how can i fix this problem
it can enter bootloader mode by pressing side ok+power+reset
plz give me steps detail and softwares
thanks in advance
Click to expand...
Click to collapse
The forum is NOT for ASKING for help. The forum is FOR reading and then asking...
Recovered From Stuck on Bootloader & Splash Screen
Hi,
I had the same problem (1st stuck on bootloader- reflashed custom ROM then Stuck On Splash Screen with no GSM) on my SPV M3100 after a failed radio upgrade first it was stuck in bootloader for the longest time while i searched and re-tried uprading the radio rom inbetween using recover tools like mitty.exe and NBHextract but nothing happend until i had a brainstorm i had previosly downloaded an original vendors ROM for the Hermes so i flashed it and Pow Pow Pow - Radio and Software Rom back to normal and working OK!!!
Hy to all! I received an T-Mobile MDA Touch Plus in boot mode(ticolor bar with ruunbh and niki200, spl-1.16.0000, cpld4) and i try to flash with original t-mobile rom "tmobile_mda_touch_plus_2.06.111.2.exe". The flash process is stoped to 42% and now niki200 is still in boot mode but with spl-1.22.0000 and only "serial" on the screen! I can not boot again and i tryed to use MTTY but i received always message "USB port can not open"! how can i boot again this device? Thanks to all!
Please htc developers i need ur help .niki200
I have same problem here after trying to flash my htc niki200 it get to 99% and it stop now phone is in three color and i can flash it with any rom . I have to revive this phone for my customer .
Please i need ur help
Hello i need to flash my phone as it is in german swisscon but i managed to unlock it now its just german i used USLP and it shows blue-red-green screen wich shows niki100 USLP-4 but what ever software ROM i try to flash in it synces with PC shows the bootloader and then both PC and phone shows Loading bar 0-100% then it just resets and shows me recovery option on PC so no rom cant be flashed, thanks for reading if you know what may couse this please tell me
PS: its ELF Touch Dual niki 100 with 3G camers on front, i want to reflash it to English - its unlocked and can be used with any SIM
Hello
I am writing to you because I have a big problem with my hd2
Let me explain
My brother giving my hd2 of France I wanted to be able to decode my SIM card I left home technician I know what he did with
Now my htc and block on a white page can not extinguish the only solution to remove the battery
Well I tried all possible operations
- Resit (red)
- Hard Resit
- Hspl
- Hspl2
- Task29
- Mtty
-
Still the same problem on block blank page is there a solution to my problem or not friends
That the information display mode botlooder
PB81100 HX-BC
SPL-1.42.0000 XE
Microps (LED) 0 05
Microps (touch) 0 40
Incorrect friends if there are spelling
thank you
Hey there. I have kind of the same problem, except that when i hard reset, enter in bootloader or install the original rom from the sd card i can see everything on the display, but most of the times when i turn on the phone the display is blank and white, no booting, no nothing. please help...