Hi all!
Today I observed a rainbow blur on my TG01 upper display, it's seems like a liquid ,but it's under the surface and I can't clean it. It's like the crystal liquid it's came out somewhere or somehow.
It's could be a fissure or it's something else?
If it is, how it's this possible, because I treathed this phone like a jewel?
What do you think ,what it is.....?
I uploaded two photos about this.
What should I do?
Sorry for my english.
Thank you for answears.
do you have a screen protector on the screen? if so remove it and see if it disapears
jutley said:
do you have a screen protector on the screen? if so remove it and see if it disapears
Click to expand...
Click to collapse
There is no Screen protector uplied by me, it's in same shape like out of the box, only that, this movement was 2 months ago (out of the box)
I had the same with my first TG, that because you put it in your pocket without big protection.
This big screen don't like a "hold pressure"
PHOTO= http://nsa09.casimages.com/img/2009/09/30/090930040951125085.jpg
Nothing to do for repair.
Sorry for you
LeTo08 said:
I had the same with my first TG, that because you put it in your pocket without big protection.
This big screen don't like a "hold pressure"
PHOTO= http://nsa09.casimages.com/img/2009/09/30/090930040951125085.jpg
Nothing to do for repair.
Sorry for you
Click to expand...
Click to collapse
That's mean that it can't be returned or changed in warranty at Orange?
How do you managed that?
pitagorasz said:
That's mean that it can't be returned or changed in warranty at Orange?
How do you managed that?
Click to expand...
Click to collapse
I've seen in a Spanish forum that people with the same issue have obtained a new one from the Spanish dealer (telefonica) under guarantee..
Good luck
Pere said:
I've seen in a Spanish forum that people with the same issue have obtained a new one from the Spanish dealer (telefonica) under guarantee..
Good luck
Click to expand...
Click to collapse
Thank's , I will give it a try, and keep you inform about the situation.
my touch its dead
So I started testing.
the problem its touch screen.
display its ok!
touch screen is on a plastic surface.
Initially there was very little distance between the two
because of adhesive tape on the plastic (touch screen)
after a while they are to close, and then see those refraction,
the rainbow.
darckreign1984 said:
So I started testing.
the problem its touch screen.
display its ok!
touch screen is on a plastic surface.
Initially there was very little distance between the two
because of adhesive tape on the plastic (touch screen)
after a while they are to close, and then see those refraction,
the rainbow.
[/URL]
Click to expand...
Click to collapse
Thank's It's very good information, this way we know that rainbowing effect it's caused by the construction of the phone and can happen with anybody, so in this cause Orange (in my case) must replace the phone in guarantee...
I will keep you guys in touch.
Unless I'm very much mistaken this rainbow effect is harmless, because you can't see it when the backlight is on, and it doesn't affect device operation. It doesn't look as good when the device is turned off, but that's about it.
Or am I mistaken?
paroariax said:
Unless I'm very much mistaken this rainbow effect is harmless, because you can't see it when the backlight is on, and it doesn't affect device operation. It doesn't look as good when the device is turned off, but that's about it.
Or am I mistaken?
Click to expand...
Click to collapse
the rainbow that u see on the screen is called a newton's ring, it happens from pressure applied on the screen, it only happens to resistive touchscreens and not capactive, and if u dont take care of it, it may start to spread, i recommend that you should have used to screen protecter beacuse it usually helps protect this from happening, good luck!
What kind of screen protector would you recommend? Surely any kind of transparent soft case will apply the same kind of pressure to the screen. Or do you mean some kind of hard case that prevents any contact with the screen?
paroariax said:
What kind of screen protector would you recommend? Surely any kind of transparent soft case will apply the same kind of pressure to the screen. Or do you mean some kind of hard case that prevents any contact with the screen?
Click to expand...
Click to collapse
keep ur phone in ur jacket inner pocket , and not ur pants where it gets bent and pressured ... thats wat im doin
souljaboy said:
keep ur phone in ur jacket inner pocket , and not ur pants where it gets bent and pressured ... thats wat im doin
Click to expand...
Click to collapse
Good advice, keep it in mind!
Keeping it in my trousers' pocket costed me a bloody display(no kidding...)!!!
Hi guys
In Poland We have this same problem.
This is a unstick touch layer.
The reason of problem is bad heat dissipation from procesor.
When We use very strong own TG01 the Snapdragon have about 60'C and this type touch display is very susceptible to heat.
This problem is general problem of users TG01.
The cost of new touch display is hmm about 45 Euro.
After about 5 months use the first "oil spots" appear on the display.
When We use with this problem after 1 month have problem with less sensitivity of the screen.
i just saw the same thing with my tg01 today...but it`s a lot bigger...about 3 quarters of the screen but in the center...what should i do?
ps: i keep it in my jacket pocket...and there is no presure on it...i don`t know what could o caused this...
sattodude said:
i just saw the same thing with my tg01 today...but it`s a lot bigger...about 3 quarters of the screen but in the center...what should i do?
ps: i keep it in my jacket pocket...and there is no presure on it...i don`t know what could o caused this...
Click to expand...
Click to collapse
If your still under warranty, contact toshiba
olyloh6696 said:
If your still under warranty, contact toshiba
Click to expand...
Click to collapse
And if not....
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchscreen_Touch_Screen_/360304861826/item
Good luck
Pere said:
And if not....
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchscreen_Touch_Screen_/360304861826/item
Good luck
Click to expand...
Click to collapse
Does it void warranty to replace it yourself?
olyloh6696 said:
Does it void warranty to replace it yourself?
Click to expand...
Click to collapse
The full phrase was: AND IF you are NOT still under warranty.....
Related
Hello
Today i got avery small Kratzer 7 linke scribed into the touch hd display ?
is There a polish paste or something to get this away ?
What to do ? Can anybody help perhaps ?
1000 thanks in advance
Regrads
M:R
your Kratzer must be a scratch
you can put a displaycover on it. (you will see small scratches anymore)
please don't use anything of displaypolish... you will destroy your touchscreen foil.
use everytime a displaycover (one foil is in-box), if you don't use it, you will get angry everytime !
SAVE YOUR PHONE
Hallo !
Thank you very much for your advise.
I will give it a try.
Best greetings
MR
is there a way to remove scratches on a screen that isn't touch? not for the HD but for any other regular phone?
http://www.displex.com
69reichertm said:
Hello
Today i got avery small Kratzer 7 linke scribed into the touch hd display ?
is There a polish paste or something to get this away ?
What to do ? Can anybody help perhaps ?
1000 thanks in advance
Regrads
M:R
Click to expand...
Click to collapse
i got a scratch on mine as well with the stylus right down the middle , but the screen cover that comes with the hd is rubbish , so i bought 1 off ebay but i can still see the scratch underneath it but id rather have that than get more scratches
i did see on 1 site which sold displex that it is compatible with the touch hd(which i didnt believe as every other site that sells doesnt say about touch hd compatible
myslee_ovi said:
your Kratzer must be a scratch
you can put a displaycover on it. (you will see small scratches anymore)
please don't use anything of displaypolish... you will destroy your touchscreen foil.
use everytime a displaycover (one foil is in-box), if you don't use it, you will get angry everytime !
SAVE YOUR PHONE
Click to expand...
Click to collapse
You might not get anymore, but you can still see the scratch that you had before.
I first just want to get rid of the scratch, before putting the displaycover on it.
There must be some polish. I heared there's even one for the Iphone.
Mine is the same - one scratch but now I have the cover on and can still of course see the scratch.
Would love to get rid of it but all the polish type scratch removers are abrasive and they're meant to be a bad idea on touchscreens.
Need some product that fills the scratch instead.
IC3 DEMON said:
You might not get anymore, but you can still see the scratch that you had before.
I first just want to get rid of the scratch, before putting the displaycover on it.
There must be some polish. I heared there's even one for the Iphone.
Click to expand...
Click to collapse
Well, the iPhone has a glass capacitive screen, a completely different thing. I'm pretty sure you can use a polish on that, but our resistive screens are much more delicate and I wouldn't take the risk.
I'm a simple amateur. Please, don't criticize my rustical methods. I did the best I could.
I could'nt separate the screen from the housing: too tight!! (I bought the two pieces and I replaced both)
Hope it helps someone
Nice Thanks mate!
dejx said:
Nice Thanks mate!
Click to expand...
Click to collapse
Thanks to you dejx
165 views and only 1 agreement... sniff, sniff
Nice Video.
Hopefully I will never need to take mine apart.
And here you are the reassembly.
Look in first post
you're welcome
Nice stuff
I'm gonna follow your video as a guide next time I change the housing.
Thanks!
How about Dust isn't there a risk of having dust stuck between the digitizer and lcd? isn't it the same risk as in aplying screen protection. I tried several time aplying screen protector but never succeed without having dust particle stuck in between even though it's allmost unnoticable.
What's your experiance in this ?
jpfa said:
How about Dust isn't there a risk of having dust stuck between the digitizer and lcd? isn't it the same risk as in aplying screen protection. I tried several time aplying screen protector but never succeed without having dust particle stuck in between even though it's allmost unnoticable.
What's your experiance in this ?
Click to expand...
Click to collapse
That's what I feared and that's why I put on the gloves and I was careful to clean the internal part of the screen before the assembly.
It may be a very small particle of dust, but I can't really see it.
Very nice tutorial. I guess i have to change my digitizer too sometime in the future because it has a defect (these newton rings) and i dont know how long it will work with this defect. I'm sure your videos will help me.
Eyghon said:
Very nice tutorial. I guess i have to change my digitizer too sometime in the future because it has a defect (these newton rings) and i dont know how long it will work with this defect. I'm sure your videos will help me.
Click to expand...
Click to collapse
I hope it helps you too. Ask me if you have any doubt. I will try to help you if I can
Great HowTo, thanks!
Thanks!
Nice tutorial, hope I will never need it.
Was the reassembled phone fully working at the first time or did you need some further tries.
Thanks, nhedgehog
nhedgehog said:
Nice tutorial, hope I will never need it.
Was the reassembled phone fully working at the first time or did you need some further tries.
Thanks, nhedgehog
Click to expand...
Click to collapse
The device works ok. At the beginning I had to realign the screen. Few days ago I realized that the screen had the oil stain (the device was working perfectly), and I made it disappear with a tape.
what if the part I purchased doesn't come with the metal surrounding. Only the glass do you use glue to stick it on the chassi ? any tips on this issue before taking my phone apart ? or you recomend to send back the glass and get the whole front? Thank for the video it must have taken you some time to edit.
jpfa said:
what if the part I purchased doesn't come with the metal surrounding. Only the glass do you use glue to stick it on the chassi ? any tips on this issue before taking my phone apart ? or you recomend to send back the glass and get the whole front? Thank for the video it must have taken you some time to edit.
Click to expand...
Click to collapse
I heard that many people has broken the original digitizer trying to separate it from the housing.
That's why I bought both pieces.
But I also heard that is possible to separate them, being very careful. But it's a risk. And I heard too that you can use any kind of glue, including the one we used at school.
I hope that I have understood your question.
Thanks for you greatefulness!
very usefull tutorial
I have bought me a touch diamond 2, with a pretty damaged housing
now I dare to try to replace it, thanks to you're tutorial
First, thank you for your useful guide, but i missed something.
What about the light sensor cover (it's at the opposite side of the power LED). Is it included in the new housing? Because i didn't find it on the new housing that I bought (may be because it is not an OEM?)
Thanx in advance!
blackice666 said:
First, thank you for your useful guide, but i missed something.
What about the light sensor cover (it's at the opposite side of the power LED). Is it included in the new housing? Because i didn't find it on the new housing that I bought (may be because it is not an OEM?)
Thanx in advance!
Click to expand...
Click to collapse
Yes, my new housing has the other led.
I have tried to disassemble this led from my old housing but... I failed.
Sorry,but I can't help you with this.
Something72 said:
The device works ok. At the beginning I had to realign the screen. Few days ago I realized that the screen had the oil stain (the device was working perfectly), and I made it disappear with a tape.
Click to expand...
Click to collapse
How did you realign the screen? I tried to use the calibration utility but I it goes into an endless loop. tried to re-assemble but got the same result
Any ideas what might be wrong?
voxter said:
How did you realign the screen? I tried to use the calibration utility but I it goes into an endless loop. tried to re-assemble but got the same result
Any ideas what might be wrong?
Click to expand...
Click to collapse
Sorry, voxter.
I realign the screen using the app included in settings (Settings > System > Screen > Align Screen).
I read in other thread that you tried without success (just endless bucle). I had endless bucle too in another ROM. But after two or three times I made a soft reset and the screen begun to work perfectly.
Now I have a Tess ROM and only asked me to repeat it twice. After that, the screen works perfectly.
It's all that I know about it. Hope it helps
Hi folks,
Having used my TG01 for almost a year and generally happy with it except for the screen which is a bit unresponsive which i thought was the same for all TG01 phones. Until yesterday when i bought a new one for my friends and OMG the screen of the new phone is amazingly responsive; therefore, i started thinking mine might be a faulty one (i tried automatic screen cal but it does not help).
Just want to ask if buying a new screen could solve the issue or there's something else i should notice. I really would want to buy a new, more responsive screen.
Any helps appreciated
Regards
Try to touch the screen lightly when setting the screen up because windows will detect the pressure as well when you touch it.
Thanks mate, i already did that, it is indeed improve but nowhere near the new one i would say. I think it may be my phone that sucks -_-
bagiabanmaybay said:
Thanks mate, i already did that, it is indeed improve but nowhere near the new one i would say. I think it may be my phone that sucks -_-
Click to expand...
Click to collapse
do you have any screen protector?
Pere said:
do you have any screen protector?
Click to expand...
Click to collapse
yes I do,
But i tried taking that off and it did not improve anything -_-
try this : TouchEc1_0
So I just got a new Galaxy S3.
It hasn't been a day and i've noticed a kind of a shade that looks like the "super amoled" logo that's on the sticker that you peel off.
I really hadn't noticed it at first but now it's really annoying on white background.
I've found a picture on the web so that you guys can see my problem.
http://img41.imageshack.us/img41/3724/img2689su.jpg
Is there any way to get rid of this? I've tried running so called burn in fix apps but none of them worked.
I've also tried using wet wipes but it didn't remove it.. so It's not stains or anything and it appears like its burnt on the screen
Everything else is great about this phone but it's just this shade that looks like "c" that annoys me!
I have 6 months warranty but my dad bought it in Japan and he just returned from there and it's not like he's there every month so it's a bit of a problem.
If you have any solutions or if anyone here encountered the same thing please please share your experience.
Thanks in advance!
???
looks like stain from the plastic cover that the comes comes with... try wiping with a microfibre cloth with a little alcohol...
nm8 said:
looks like stain from the plastic cover that the comes comes with... try wiping with a microfibre cloth with a little alcohol...
Click to expand...
Click to collapse
isn't alcohol dangerous for the screen?
and i dont think that its a stain.. it really seems like its burned inside the screen :/
i tried using wet wipes but it didn't help
ornat777 said:
isn't alcohol dangerous for the screen?
and i dont think that its a stain.. it really seems like its burned inside the screen :/
i tried using wet wipes but it didn't help
Click to expand...
Click to collapse
no alcohol is not dangerous (or any other liquid), as long as you do not let it seep through the sides of the phone.
I don't think that mark is inside, the plastic cover is outside and I don't imagine ever seeing a screen saver image of that type unless you have used one...
Hmmmm, its not only the c, you can see inside of the c the word amoled and on the top you can see the word galaxy s3
Sent from my GT-I9300 using xda app-developers app
Was this a display model by any chance?
Could it have been exposed to sunlight with the marketing sticker left on?
deanayres said:
Was this a display model by any chance?
Could it have been exposed to sunlight with the marketing sticker left on?
Click to expand...
Click to collapse
No not that I know of, my father took it off.
Anyway how silly it is to put sticker on the phone if there is a risk to get burn in because of sun light?? this is ridiculous from them!
at least warn the customers.
I don't know.. it's not like a stain or something because it seems imprinted inside the screen ;(
and that photo is not mine but I do have that same 'C' right in the same location obviously from the sticker
Wtf that's some weird issue you have there mate
Sent from my GT-I9300 using xda premium
ornat777 said:
No not that I know of, my father took it off.
Anyway how silly it is to put sticker on the phone if there is a risk to get burn in because of sun light?? this is ridiculous from them!
at least warn the customers.
I don't know.. it's not like a stain or something because it seems imprinted inside the screen ;(
and that photo is not mine but I do have that same 'C' right in the same location obviously from the sticker
Click to expand...
Click to collapse
Return it or get it exchanged. That screen got exposed to sunlight while having the sticker on.
Probably a display unit (which you would not want to have).
Best of luck mate.
Sent from my GT-I9300 using Tapatalk 2
SGS3 comes in a box so does not get exposed to sunlight .
6 months warranty ????
Smells like not a new phone to me .
jje
I think its best if you sak for a replacement ASAP before you run out of time
drakester09 said:
Return it or get it exchanged. That screen got exposed to sunlight while having the sticker on.
Probably a display unit (which you would not want to have).
Best of luck mate.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
What's a display unit exactly?
And this phone is from AKKY INTERNATIONAL in akihabra they have a website in English and everything so I'll try to contact them hopefully it will go well. I dont even know the procedure of this.. will they ask me to ship the phone to them?
ornat777 said:
What's a display unit exactly?
A unit to display in a store . It has no network hardware ,
And this phone is from AKKY INTERNATIONAL in akihabra they have a website in English and everything so I'll try to contact them hopefully it will go well. I dont even know the procedure of this.. will they ask me to ship the phone to them?
Ship or take to them .
Fact is standard warranty from a vendor is usually 12 months standard limited warranty from Samsung is 24 months .
http://www.akky-jp.com/shopping/index1.html
Click to expand...
Click to collapse
According to their website there is also 6 months limited japan warranty.
I will contact them and I will also add pictures of the phone and all of the receipts..
And I see that when you ship the item to them you need to fill an RMA form so that no additional customs will be charged.
Hello dear XDA Devs,
Is there a fix for screen ghosting (random touch input) for a ZU? Mine often goes crazy if i have warm hands and come near to my device whith them. Same happens if i breath a little bit on the display.
Water marks are white and the device has Root + Locked bootloader
Thanks and Greedings
Lightbird
Lightbird said:
Hello dear XDA Devs,
Is there a fix for screen ghosting (random touch input) for a ZU? Mine often goes crazy if i have warm hands and come near to my device whith them. Same happens if i breath a little bit on the display.
Water marks are white and the device has Root + Locked bootloader
Thanks and Greedings
Lightbird
Click to expand...
Click to collapse
Firstly try to clean the screen without any stain or greases...
Try to tweak the sensitivity by changing the figure in /system/usr/idc/max1187x_touchscreen_0.idc (touch.filter.level = 5)...
Try to play around to get the best for ur device...
BTW white water marks due to water damage device??
ronald_loulan said:
Firstly try to clean the screen without any stain or greases...
Try to tweak the sensitivity by changing the figure in /system/usr/idc/max1187x_touchscreen_0.idc (touch.filter.level = 5)...
Try to play around to get the best for ur device...
BTW white water marks due to water damage device??
Click to expand...
Click to collapse
This device has no water damage, that's what i wanted to say . Because of touch.filter.level: Sorry that i didn't sayed that i already tryed this whith best results @ 7, which is too high for a pen input, but the device doesn't go crazy that often.
Yesterday i've seen that you can fix this on Nexus 4 by reisolating a cable. If this is the case on ZU i'm gonna send it in for Warranty.
Lightbird said:
This device has no water damage, that's what i wanted to say . Because of touch.filter.level: Sorry that i didn't sayed that i already tryed this whith best results @ 7, which is too high for a pen input, but the device doesn't go crazy that often.
Yesterday i've seen that you can fix this on Nexus 4 by reisolating a cable. If this is the case on ZU i'm gonna send it in for Warranty.
Click to expand...
Click to collapse
Better just send back to Sony...
I'm facing similar problems with my ZU =/
After I've tried to replace a protective skin for my display, the phone started to present ghost touching. I mean, a LOT of ghost touching. As my warranty expired a few months ago, I sent the phone to a private maintenance and now they want to replace the whole screen.
Do you think I'll have to replace the screen or maybe there's a way out of this? Here in Brazil, replacing the screen can be as expansive as buying a new phone (and I must confess that I'm tempted to forget about my Z Ultra and buy a Z2), so if I could fix this in some another way... well, that would be terrific.
Thanks in advance!
garazaber said:
I'm facing similar problems with my ZU =/
After I've tried to replace a protective skin for my display, the phone started to present ghost touching. I mean, a LOT of ghost touching. As my warranty expired a few months ago, I sent the phone to a private maintenance and now they want to replace the whole screen.
Do you think I'll have to replace the screen or maybe there's a way out of this? Here in Brazil, replacing the screen can be as expansive as buying a new phone (and I must confess that I'm tempted to forget about my Z Ultra and buy a Z2), so if I could fix this in some another way... well, that would be terrific.
Thanks in advance!
Click to expand...
Click to collapse
maybe this will help. Its the Fix i found for the Nexus 7
I started to have a lot of that Phantom touches after taking off my aftermarket screen protector. **** was so annoying. I still have the anti shatter film but don't want to mess with that crap so I installed another screen protector and everything is normal again.
It has been 1 month since installing the new screen protector and no ghost touches.
Sent from my C6833 using XDA Free mobile app
Well... I must confess that the idea of installing a new screen protector never occurred to me
I guess this could worth the shot, actually. Anyway, I've ordered a new display (got a really good price... way way cheaper than the official maintenance was charging), so if the new screen protector won't work out, I'll proceed to replace the whole display.